SamyGO

SERVICE MENU' useful tips and tricks for some "Model" or some "Local Set" that have limitations
useful for some "Model" or some "Local Set" you can change but you can't save some improvements values in service men?: Solution is ENTER SERVICE MENU' and change "Model" to a better model with enabled functionality values and downgrade according to your hardware. VALUES ARE SAVED NOW!

TO ENTER SERVICE MENU':
1. turn on tv (normal mode)
2. push the "info button", push the "Factory button"
or
1. turn off tv
2. INFO, MENU, MUTE, POWER, then FACTORY+3SPEED
You can emulate this with infrared smartphone or IR Extender + wav files you can download in this forum (if tv led don't blink when play wavs, audio output is low, try another device)


H6400, ENABLE PVR+MHP+LCN (USEFUL FOR ITALIAN USERS):
ENTER SERVICE MENU' and change "Model" from H6400 to H6500 and "Local Set" to your country
BOM Model = 6400
Model = H6400 ; Local Set = EU => PVR ON ; MHP OFF ;
Model = H6400 ; Local Set = EU_Italy => PVR OFF ; MHP ON ; LCN Italy ;
Model = H6500 ; Local Set = EU_Italy => PVR ON ; MHP ON ; LCN Italy ; Satellite tuner support enabled (but hardware missing)

PVR ON VALUES (after Model change):
MRT Options > PVR Support > ON
MHP ON VALUES (after Model change):
MRT Options > Data Servece Support > ON
MRT Options > JAVA Data Servece Support > ON
in Sub Option > Info Link Country > Italy (optional !?)


H5500, tested solution for ENABLE PVR+MHP+LCN (USEFUL FOR ITALIAN USERS) is:
Change:
ENTER SERVICE MENU' and change "Model" from H5500 to H6500 and "Local Set" to your country
BOM Model = 5500
change mrt options as num admi 4>3, num usb 3>2, BT support off, 3d support off ecc to H5500 values
except the values ??that you want to keep (PVR & MHP for example).


Warning
to the suggestion of "tendy": changes to the model restore all values to default as "OTN Support: ON" in "Option MRT". it is highly recommended to restore to OFF and prevent software updates.

H4000, H4003, H5000, H5003, H5030 ecc are TV versions without quad core processor and with a different software. You can try to enable something via operator but software platform firmware installed on these models hardly allow big things...

post your tests (at your own risk)

Hello,
I tried on ue32h5500ay to enable PVR SUPPORT under MRT options but it seems like it doesn't saves changes. I enabled the service option using ir extender and the wav file Factory+3Speed_inv.wav.
After I change "PVR SUPPORT ON", when I switch on my smart tv I have no pvr function enable and if I check the PVR SUPPORT option is again OFF
To save changes do I have simply to switch off my tv?
P.s. the option of number of pvr is already on number 1
This is my test. If someone has some trick for me please me.
(sorry for my english)

tested solution for H5500, added in first post!

Hi, I've the same issues on TV ue40h6240ay. I can access to service menu by emulating factory button on android with IR but after the editing of some values I cannot save them. On tv reboot secret menu return back to default values. Someone can help me?

(sorry for my english, I'm italian

@horizon80: you have to 'ENTER SERVICE MENU' and change "Model" from H6240 to H6500 and downgrade value according to your hardware souch as Satellite decoder ...difference between ue40h6500 and your H6240 are minimal .

Any ideas about ue32h5030?

Hi, thanks for these useful tips! I want to report my personal experience with my EU40H6400 in Italy:
Since I had to do some trial/error before everything worked as expected, I've reported below my exact procedure and settings for the benefit of everyone:
All the values are the ones suggested by Olfason. The step when you check the OTN Support value is an addition of mine, because I found that after messing up with the "Local Set" and the "SW Model" and switching off/on, it was reset to "ON" again and the tv even asked me to install a new available update! So I readily disabled OTN Support and checked a few times that the situation was returned safe again.

@horizon80: while I was playing with the different parameters, it happened that some fields were being reverted once the tv was turned off (for example PVR Support), but with the current configuration they remain. I hope it will work for you too

tendi wrote:[Is this function called MHP?]

Yes it seems MHP is still used in Italy, whereas most other countries evolved to supposedly more flexible HbbTV

Yes it seems MHP is still used in Italy, whereas most other countries evolved to supposedly more flexible HbbTV

Somehow I'm not surprised

Update: during the last days I've noticed that I'm not able to change the number of the channels anymore. So, for example, if I want to assign the channel which now is n.10 to another number, I can't. This "restriction" must be due to the change of Local Set to the Italian version (damn!). Are you aware of any particular setting that I could change in the Extended Service Menu in order to reactivate this useful function without having to revert all the things as they were before?