Page 1 of 1
Boot loop after SamyGo installation.
Posted: Sat Nov 08, 2014 10:02 am
by Q14siX
Hi there,
after I have installed on my SamyGo UE55F8090, this always stuck in a boot loop.
You can stop the whole, if one separates the network connection (wireless and cable) or with the "Samsung Smart View 'app turns off the TV.
Then this but 24 hours later restarts and hangs alone again in the boot loop.
Can someone help me there?
Hallo zusammen,
nachdem ich SamyGo auf meinem UE55F8090 installiert habe, h?ngt dieser immer in einer Boot-Schleife fest.
Stoppen kann man das ganze, wenn man die Netzwerkverbindung trennt (WLAN und LAN) oder aber mit der "Samsung Smart View" App den Fernseher ausschaltet.
Dann startet dieser allerdings 24 Stunden sp?ter erneut allein und h?ngt wieder in der Boot-Schleife.
Kann mir da jemand helfen?
Re: Boot loop after SamyGo installation.
Posted: Sat Nov 08, 2014 10:17 am
by juusso
- create empty file with name
- place it to USB. Power off TV, connect that USB and power on TV. TV should work normally and you can attach log file from /mnt directory to understand what`s wrong.
- post the log file (/mnt/samygo.log)
- Remove SamyGO from SmartHub if you want.
Re: Boot loop after SamyGo installation.
Posted: Sat Nov 08, 2014 10:26 am
by Q14siX
When I stop SamyGO as described, then how can I get to the log files?
Wenn ich SamyGO stoppe wie beschrieben, wie kann ich dann an die LOG-Files kommen?
Re: Boot loop after SamyGo installation.
Posted: Sat Nov 08, 2014 10:29 am
by juusso
lol, that`s good question
You don`t have to write in two languages. Forum language i s english.
I think if you delete STOP_SAMYGO and use just STOP instead, then you should have ftp connection open. Try.
Re: Boot loop after SamyGo installation.
Posted: Sat Nov 08, 2014 10:45 am
by Q14siX
Here is the log file.
Re: Boot loop after SamyGo installation.
Posted: Tue Nov 25, 2014 7:20 am
by Q14siX
No solution to my problem?
What I noticed also, the TV starts after approximately 24hours of the last power off alone and then re-suspended in the boot loop.
Re: Boot loop after SamyGo installation.
Posted: Wed Nov 26, 2014 2:40 pm
by miazza
Q14siX wrote:Hi there,
after I have installed on my SamyGo UE55F8090, this always stuck in a boot loop.
You can stop the whole, if one separates the network connection (wireless and cable) or with the "Samsung Smart View 'app turns off the TV.
Then this but 24 hours later restarts and hangs alone again in the boot loop.
Can someone help me there?
Hallo zusammen,
nachdem ich SamyGo auf meinem UE55F8090 installiert habe, h?ngt dieser immer in einer Boot-Schleife fest.
Stoppen kann man das ganze, wenn man die Netzwerkverbindung trennt (WLAN und LAN) oder aber mit der "Samsung Smart View" App den Fernseher ausschaltet.
Dann startet dieser allerdings 24 Stunden sp?ter erneut allein und h?ngt wieder in der Boot-Schleife.
Kann mir da jemand helfen?
What is the FW you are using ?
I had a similar issue with original FW and I solved by upgrading SW to version 1115.
Also, as suggested to another user, you can disable the ins scripts and enable them one by one in order to identify who is the responsible of the reboot.
Re: Boot loop after SamyGo installation.
Posted: Fri Nov 28, 2014 7:22 am
by Q14siX
But that would not explain why the SmartTV turns on itself and stuck in the boot loop remains.
Re: Boot loop after SamyGo installation.
Posted: Sat Jan 31, 2015 7:50 pm
by Q14siX
The problem I have now finally able to fix it.
In the service menu I have this then the Local Settings can make settings completely reset and after activation.
Since the device is running without any problems.
No boot loop more.