Issues after Firmware Upgrade - UAEH5000
Posted: Sun Nov 30, 2014 7:41 am
So I have a samsung 40inches UAEH5000 model and was looking to upgrade the firmware for it.
However, in my hurry to do so, I have installed the firmware for UNEH5000.
The TV installed the update and all and seems to be running fine but with a few issues with HDMI connections.
the 2 HDMI's are swapped now, so HDMI1 is 2 and vice-versa, plus also I need to always connect 2 devices with active HDMI connections, otherwise it just shows no signal.
Any suggestions/help on this will be greatly appreciated...
However, in my hurry to do so, I have installed the firmware for UNEH5000.
The TV installed the update and all and seems to be running fine but with a few issues with HDMI connections.
the 2 HDMI's are swapped now, so HDMI1 is 2 and vice-versa, plus also I need to always connect 2 devices with active HDMI connections, otherwise it just shows no signal.
Any suggestions/help on this will be greatly appreciated...
