Lib allows to switch directly from air/cable to sat (to air/cable) source without having to explore TV menus or use any key macro to do so. Mainly designed to be used with libRCremap with CMD support. Of course no need to try it if you have no sat tuner on your TV.
Usage: *For D series (arm), replace every instance of /mnt below by /mtd_rwcommon/widgets/user/SamyGO/SamyGO
Get latest samyGOso from there and copy/overwrite samyGOso file (not folder) to /mnt/opt/privateer/usr/bin
Set permissions if needed (usually not if overwritten)
samyGOso -d -A -B -l /mnt/opt/privateer/usr/libso/libAirToSat.so CABLE
TV should switch to sat if on air/cable, and to air/cable if on sat
Logfile is written to /dtv/AirToSat.log
*Do not ask me for a switch between AIR and CABLE, a built-in key already exists in TV: KEY_ANTENA=54
Usage with libRCremap with CMD support:
Do not directly inject libAirToSat as CMD, a little intermediate script is needed to prevent consecutive injections, depending on how long you press remote button. Here's sample script (D/E/F only):
22/5/2015
v0.2.9 - Logging antenna name in local language
21/5/2015
v0.2.7 - Rewrote whole lib, fix no signal issue on concerned TVs
8/2/2015
v0.2.3 - Fixed: sometimes erased sat channel name when switching to
- Switches faster ;)
5/2/2015
v0.2.1 - Added 'CABLE' switch
v0.2.0 - First release
You do not have the required permissions to view the files attached to this post.
I`m not true D series tester, my tv has built in sat tuner, but it is not used and here is no sat channels at all. Usually i`m on DVB-C 99.9% of the time. Ran this to give you some log:
In current state, patch is not expected to switch from cable to sat, but only air to sat. I assumed that cases of people having both DVB-C and DVB-T are very rare. But it's easy to change it and I could do so if any request.
Because I want to use the same unique command (defined in RCremap) to switch 'to' and to switch 'back'.
What would be worth is maybe to cycle available modes (at least the ones where channels are available).
Then if ever you'd like to easily switch from AIR to CABLE. There's already an existing key to do so
zoelechat wrote:Because I want to use the same unique command (defined in RCremap) to switch 'to' and to switch 'back'.
What would be worth is maybe to cycle available modes (at least the ones where channels are available).
Then if ever you'd like to easily switch from AIR to CABLE. There's already an existing key to do so
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":) If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!If you want root DISABLE internet access to your device!!!!DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Cool, still needs testing on F but I'm almost sure it works. I'm going to update RCremap thread from Extras to make it more understandable, then release