SamyGO

Posted: **Tue May 12, 2015 12:47 pm**

Hi there. I've been searching in the wiki and find out the way to get to the full service menu with an ir emitter i built.
The thing is that I can access to the PVR and put it in ON. The Num of PVR record is also in 1.

The thing is that when I turn off the TV the PVR function still doesn't work. (Function not available message when I press the REC button).
If I go to the service menu again, the PVR function is still OFF, so changes made in the menu are not saved.

Does anybody know if there is a saving procedure?

My firmware is 6202. T-MST14DEUC-2606.2

THANKS.

Posted: **Tue May 12, 2015 4:27 pm**

Could it be that I have to change the model type also from the menu to the H6500?
I've been told that from another user on the forum, but he is not 100% sure, and don't want to mess with the TV.

Also a second question. There is one part in the menu that says DVB tuners 2. Does that that mean that my tv has two tuners?
Thanks a lot.

Posted: **Tue May 12, 2015 4:36 pm**

delir66 wrote:Could it be that I have to change the model type also from the menu to the H6500?
I've been told that from another user on the forum, but he is not 100% sure, and don't want to mess with the TV.

Maybe you'll find some useful infos there: viewtopic.php?f=78&t=8100

delir66 wrote:Also a second question. There is one part in the menu that says DVB tuners 2. Does that that mean that my tv has two tuners?

Yeah, probably DVB-T and DVB-C

Posted: **Tue May 12, 2015 6:04 pm**

thanks a lot zoelechat!!! That is what i was looking for!!

SamyGO

Activate PVR function on H6200 (italian model)

Activate PVR function on H6200 (italian model)

Re: Activate PVR function on H6200 (italian model)

Re: Activate PVR function on H6200 (italian model)

Re: Activate PVR function on H6200 (italian model)