Page 1 of 1

No more turn off after root

Posted: Tue Nov 10, 2015 8:31 pm
by phonk
Hello.

First what I have done :
Root with non skype method
Downgrade to mst 2130
Removed the sh file
Rooted with skypemethod
Installed oscam from tanjasoft
Installed libepg

Now i get freezing menus and the biggest problem: It is no more possible to turn off the tv by any remote or the button on tv.

Need help.

Re: No more turn off after root

Posted: Tue Nov 10, 2015 9:01 pm
by juusso
disable libEPG and check if problem still here
disable oscam and check if problem still exists
disable all init scripts one by one starting with 99... and check if problem gone. Notice script which was the latest which cause problems...

Re: No more turn off after root

Posted: Wed Nov 11, 2015 9:09 am
by phonk
Thanks fot the reply.

I new to samygo, how do I remove the injections of libEPG and oscam ?

Re: No more turn off after root

Posted: Fri Nov 13, 2015 11:47 am
by phonk
Without libEPG and OSCAM the problem still exists.

Seems to be the same behavoir like this: viewtopic.php?f=78&t=9642&p=80261&hilit=brick#p80261
with the difference that I did not made a Factory Reset like the user in this thread.

Any Ideas ?
I'm now living with a workarround by using the libsoftpoweroff APP which turns the TV into softStandby. Full poweroff is still not possible and causes in TV freeze (Video is still running, but no remote commands are recognized after hiting the powerbutton (including the button on TVs back))

Re: No more turn off after root

Posted: Fri Nov 13, 2015 12:30 pm
by zoelechat
What about:
Menu->System->General->Quickly Power OFF Samsung - this option must be OFF
Menu->System->General->Samsung Instant ON - this option must be OFF
:?:

Re: No more turn off after root

Posted: Fri Nov 13, 2015 1:33 pm
by phonk
I don't have these options :-(

Re: No more turn off after root

Posted: Mon Nov 16, 2015 11:14 am
by phonk
Is there a way to unroot and reroot ? Factory reset will brick my TV I think.

Re: No more turn off after root

Posted: Wed Nov 18, 2015 7:14 am
by phonk
Problem identified, the issue is related to a connected TV camera, which I use for motioncontrol. without connection the TV goes without problems to standby.