[PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53

[zoelechat]

Is there any reason why the Tools menu became inaccessible with the latest version of the decoder?

Because developers like to introduce bugs. Better is enemy of good, grandma said

[Impero]

Is there any reason why the Tools menu became inaccessible with the latest version of the decoder?

Because developers like to introduce bugs. Better is enemy of good, grandma said

Ah well if granma says it...

[kadrim1983]

Hi there,

still trying to get the keys for recent recordings on an H-Series (UE65HU7500), but no luck so far.

Maybe @sectroyer can help me somehow?

This is what i did:

1. root the TV (FW T-NT14UDEUC-1320.0)
2. create sample recording, ~ 15 secs, ~ 15 mb
3. start PVRdecoder (1.8.2.53)
4. replace old binaries by using Tools->Force upload of all payloads ...
5. Set "magic value" under Settings->Other->DRM decode buffers (1 .. 3600)
6. try to decode the file

so far i am not able to retreive the key for any recording.

i tried all magic values from 1 to 100 with no luck. after each try, the TV-picture froze but was still playing audio. retrying always with rebooting (via power-cycle) as the needed process (exeTV) was crashed after each try.

My questions:

1. is there any use in trying more "magic" (random) values for the decode buffers?
2. what does this setting actually do? i inspected the communication via wireshark and the file libPVRdumpkeys.so being uploaded is always exactly the same. and the command sent via telnet is also always the same (mtd_rwarea/samyGOso -p $(pidof exeTV || pidof exeDSP) -l /mtd_rwarea/libPVRdumpkeys.so). so what exactly does the slider change?
3. is there any way to get the source for libPVRdumpkeys.so so i can compile it myself ( i am an embedded c developer, so i know my way around )

Thanks in advance!