Please Help Me Get Started

[jw1001]

Find out your existing firmware through (typically) Support Menu - Software Upgrade. This gives current and alternate. Check against compatibility table on main project page. The table entry for "LNxxB63x" says "Needing tester" for Telnet access, so you may have some work to do.

I don't see any reference to that model having a Content Library. The DTS application is loaded through that. However, some users have posted here
CIFS on a B630
http://forum.samygo.tv/viewtopic.php?f= ... hilit=B630
I suspect that user gained access from serial port rather than Content+Telnet.

A couple of other threads on LNxxB630s were dealing with recovery of bricked devices, also using Ex-link serial port.

I think you may be out of luck, but maybe someone else knows better.

[erdem_ua]

You needed to root your TV first. I think you have better to have ExLink cable if you don't update your firmware since Feb 2010.
So you can enter from Exlink port and could load DTS code to your TV.
Does your TV has RJ45 jack? Might be channel import hack could work for your TV and enable telnet...

[erdem_ua]

Thanks for the replies guys.

Here's the info I got from the Software Update menu:
Current Version 2009/08/27_001012
Alternative Software 2009/07/01_001011

So I guess that's good since it's pre-2/10, but I still don't know where to go from here or if it's even possible to put DTS on a B630. The TV does have a RJ45 jack, but does not have Content Library. I don't think I have an ex-link cable unless one came with the TV.

Do you think there is any way to get DTS on this model?

You can build or buy it. It's better to have one with your modals.
I advice to buy/build one for ~$5.

You can also enable telnet from Chanel Import hack, but I don't know the details.

juuso? Do we have wiki page about that hack?

[juusso]

juuso? Do we have wiki page about that hack?

Well... not yet...I know, i have to move it to wiki. I promise, i`ll

I do not know if channel import/export hack works on B630 with latest firmware, but if here is pre-FEB, bustasimes does not require use this hack.
Only for restoring u-boot (if it does not work) he can use step2 with fake firmware upgrade just with u-boot from b630...