Modifying the bootloader

[arris69]

...(devinfo)...

cpu is a bit different, may not the problem but kernel is not the same (patchlevel).

you can try to search the correct one on the samsung site http://www.samsung.com/global/opensource/

hth
arris

[arris69]

Thank you, arris

Unfortunately I've got segmentation fault while running mount....

can you pls. try this one:
http://linux.zsolttech.com/Samsung/T-SP ... 1-cifs.zip

arris

[tskitishvili]

No luck

# insmod /mtd_rwarea/cifs.ko
insmod: cannot insert `/mtd_rwarea/cifs.ko': Unknown symbol in module (-1): No such file or directory

[arris69]

No luck

# insmod /mtd_rwarea/cifs.ko
insmod: cannot insert `/mtd_rwarea/cifs.ko': Unknown symbol in module (-1): No such file or directory

this is good news,
after insmod /mtd_rwarea/cifs.ko
pls. call

Code: Select all

dmesg

and post pls. the infos about missing symboles

arris

[tskitishvili]

No luck

pls. call

Code: Select all

dmesg

and post pls. the infos about missing symboles

arris

Hello arris,

I appreciate your help. This is my last post this year. I'll be back in two weeks. Wish you all Happy holidays.

demsg log:

Code: Select all

P: Hash tables configured (established 8192 bind 4096)
<6>TCP reno registered
<4>NetWinder Floating Point Emulator V0.97 (double precision)
<6>squashfs: version 3.1 (2006/08/19) Phillip Lougher
<6>Initializing Cryptographic API
<6>io scheduler noop registered (default)
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<6>Serial: S5H2X driver $Revision : 1.01 $
<5>enter serial_request_port
<6>s5h2x-uart: ttyS0 at MMIO map 0x30090a00 mem 0xd0090a00 (irq = 19) is a S5H2X
<5>enter serial_request_port
<6>s5h2x-uart: ttySD0 at MMIO map 0x30090a00 mem 0xd0090a00 (irq = 19) is a S5H2X
<5>enter serial_request_port
<6>s5h2x-uart: ttyS1 at MMIO map 0x30090a40 mem 0xd0090a40 (irq = 20) is a S5H2X
<5>enter serial_request_port
<6>s5h2x-uart: ttySD1 at MMIO map 0x30090a40 mem 0xd0090a40 (irq = 20) is a S5H2X
<5>enter serial_request_port
<6>s5h2x-uart: ttyS2 at MMIO map 0x30090a80 mem 0xd0090a80 (irq = 21) is a S5H2X
<5>enter serial_request_port
<6>s5h2x-uart: ttySD2 at MMIO map 0x30090a80 mem 0xd0090a80 (irq = 21) is a S5H2X
<4>RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<4>[BIF:IN ] ++FSR_BML_Init(nFlag: 0x0)
<6>FSR: Registered Tiny-BML Driver.
<6>mice: PS/2 mouse device common for all mice
<6>TCP bic registered
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<6>VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
<4>VFS: Mounted root (squashfs filesystem) readonly.
<6>Freeing init memory: 92K
<1>================================================================================
<1> SAMSUNG: v2.6.18_SELP_3.X_GA_bayhill+/a1(P17)
<1>         (Detailed Information: /sys/selp/vd/lspinfo/summary)                   
<1>================================================================================
<4>fsr: module license 'Samsung Proprietary' taints kernel.
<4>[BIF:IN ] ++FSR_BML_Init(nFlag: 0x0)
<6>FSR: Registered BML Driver.
<6>FSR: Registered STL Driver.
<4>=================================================
<4>  DEVICE NAME: N/A
<4>  VERSION:     AllInOne-1.0
<4>  BUILD DATE:  Jul 17 2008 21:35:47
<4>=============== DEVICE INIT START ===============
<4>Osal init success
<4>OsaInitMmap init success
<4>Registered Dbg driver. Major=0xc3dd8ba0.
<4>Debug init success
<4>Registered AE driver. Major=0xc3dd8ae0.
<4>AE init success
<4>Registered AIO driver. Major=0xc3dd8a20.
<4>AIO init success
<4>Tsd init success
<4>Mpeg init success
<4>Unbalanced enable for IRQ 10
<4>insmod/42[CPU#0]: BUG in enable_irq at kernel/irq/manage.c:124
<4>qidH264Cb = c3dd64e0
<4>Registered H264 driver. Major=0xc3dd8720.
<4>H264 init success
<4>Unbalanced enable for IRQ 8
<4>insmod/42[CPU#0]: BUG in enable_irq at kernel/irq/manage.c:124
<4>Registered JPEG driver. Major=0xc3dd8600.
<4>Jpeg init success
<3>IRQ handler type mismatch for IRQ 8
<4>CSC init success
<4>Capt init success
<4>GPIO DATA Value:0xb8
<4>GPIO DATA Value:0x0
<4>GPIO DATA Value:0x60
<4>GPIO DATA Value:0x0
<4>GPIO DATA Value:0x0
<4>GPIO DATA Value:0x64
<4>GPIO DATA Value:0x0
<4>GPIO DATA Value:0x5
<4>GPIO DATA Value:0x0
<4>GPIO DATA Value:0x0
<4>GPIO init success
<4>Register Video driver. major=0xc3dd82a0.
<4>Vd init success
<4>Unbalanced enable for IRQ 6
<4>insmod/42[CPU#0]: BUG in enable_irq at kernel/irq/manage.c:124
<4>Graphics init success
<4>IIC init success
<4>Unbalanced enable for IRQ 28
<4>insmod/42[CPU#0]: BUG in enable_irq at kernel/irq/manage.c:124
<4>Registered SE driver. Major=0xc39aaf20.
<4>SE init success
<4>PVR Record init success
<4>PVR Playback init success
<4>Unbalanced enable for IRQ 31
<4>insmod/42[CPU#0]: BUG in enable_irq at kernel/irq/manage.c:124
<4>AVD init success
<4>Register Png driver. major=0xc39aab60.
<3>IRQ handler type mismatch for IRQ 8
<4>
<4>********** kerPng_InitInterrupt
<4>qidPngCb = c39abd20
<4>Moved the logic to Csc Spi Level  Block 
<4>PNG init success
<4>Unbalanced enable for IRQ 9
<4>insmod/42[CPU#0]: BUG in enable_irq at kernel/irq/manage.c:124
<4>Mpvd init success
<4>
<4>=============== DEVICE INIT DONE ================
<4>SAM_Print Module 0x1 is Enabled, giPrintModule=0x1
<4>SAM_Print Init success
<4>Unbalanced enable for IRQ 3
<4>exeDSP/45[CPU#0]: BUG in enable_irq at kernel/irq/manage.c:124
<4>Unbalanced enable for IRQ 4
<4>exeDSP/45[CPU#0]: BUG in enable_irq at kernel/irq/manage.c:124
<4>TsdOpen:the count value is bf2a0548
<4>Unbalanced enable for IRQ 0
<4>exeDSP/45[CPU#0]: BUG in enable_irq at kernel/irq/manage.c:124
<4>Unbalanced enable for IRQ 1
<4>exeDSP/45[CPU#0]: BUG in enable_irq at kernel/irq/manage.c:124
<4>Unbalanced enable for IRQ 2
<4>exeDSP/45[CPU#0]: BUG in enable_irq at kernel/irq/manage.c:124
<4> INSIDE  ************stadevPngRead
<4> kerPng_GetHndl ::m  Ok
<4>MemMaped Physical and virtual addrsses are 0xd7000000-0xeb000000 
<4>vma start:0x56184000 end:0x57184000 
<4>Unbalanced enable for IRQ 26
<4>exeDSP/45[CPU#0]: BUG in enable_irq at kernel/irq/manage.c:124
<4>Unbalanced enable for IRQ 25
<4>exeDSP/45[CPU#0]: BUG in enable_irq at kernel/irq/manage.c:124
<4>(ERR)[devI2c.c_1096][devI2c_WriteData]Semaphore Timeout 1
<4>Unbalanced enable for IRQ 24
<4>exeDSP/98[CPU#0]: BUG in enable_irq at kernel/irq/manage.c:124
<6>8139too Fast Ethernet driver 0.9.27
<6>eth0: RealTek RTL8139 at 0x6000, 00:12:fb:14:b0:6b, IRQ 12
<7>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
<6>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<7>ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
<6>ehci-s5h2x ehci-s5h2x.0: initializing S5H2XXX-SOC USB Controller
<7>ehci-s5h2x ehci-s5h2x.0: Found IRQ resource=15
<7>ehci-s5h2x ehci-s5h2x.0: Found Memory resource: 30070000--3007005B
<7>ehci-s5h2x ehci-s5h2x.0: S5H2X_EHCI ioremapped : C883C000
<6>ehci-s5h2x ehci-s5h2x.0: S5H2X On-chip EHCI Host controller
<7>drivers/usb/core/inode.c: creating file 'devices'
<7>drivers/usb/core/inode.c: creating file '001'
<6>ehci-s5h2x ehci-s5h2x.0: new USB bus registered, assigned bus number 1
<7>ehci-s5h2x ehci-s5h2x.0: S5H2XXX ehci setup()
<7>ehci-s5h2x ehci-s5h2x.0: reset hcs_params 0x1111 dbg=0 cc=1 pcc=1 ordered ports=1
<7>ehci-s5h2x ehci-s5h2x.0: reset hcc_params a010 thresh 1 uframes 1024
<6>ehci-s5h2x ehci-s5h2x.0: s5h2x_ehci_setup success
<6>ehci-s5h2x ehci-s5h2x.0: irq 15, io mem 0x30070000
<7>ehci-s5h2x ehci-s5h2x.0: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
<7>ehci-s5h2x ehci-s5h2x.0: init command 010001 (park)=0 ithresh=1 period=1024 RUN
<6>ehci-s5h2x ehci-s5h2x.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<7>usb usb1: default language 0x0409
<7>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: S5H2X On-chip EHCI Host controller
<6>usb usb1: Manufacturer: Linux 2.6.18_SELP-ARM_V403_V6K ehci_hcd
<6>usb usb1: SerialNumber: ehci-s5h2x.0
<6>usb usb1: configuration #1 chosen from 1 choice
<7>usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>hub 1-0:1.0: usb_probe_interface
<7>hub 1-0:1.0: usb_probe_interface - got id
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
<7>hub 1-0:1.0: standalone hub
<7>hub 1-0:1.0: individual port power switching
<7>hub 1-0:1.0: individual port over-current protection
<7>hub 1-0:1.0: Single TT
<7>hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>hub 1-0:1.0: power on to power good time: 20ms
<7>hub 1-0:1.0: local power source is good
<7>hub 1-0:1.0: enabling power on all ports
<7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<7>drivers/usb/core/inode.c: creating file '001'
<6>ehci-s5h2x ehci-s5h2x.0: ehci-s5h2x probing completed.
<6>ehci-s5h2x ehci-s5h2x.1: initializing S5H2XXX-SOC USB Controller
<7>ehci-s5h2x ehci-s5h2x.1: Found IRQ resource=17
<7>ehci-s5h2x ehci-s5h2x.1: Found Memory resource: 30080000--3008005B
<7>ehci-s5h2x ehci-s5h2x.1: S5H2X_EHCI ioremapped : C883E000
<6>ehci-s5h2x ehci-s5h2x.1: S5H2X On-chip EHCI Host controller
<7>drivers/usb/core/inode.c: creating file '002'
<6>ehci-s5h2x ehci-s5h2x.1: new USB bus registered, assigned bus number 2
<7>ehci-s5h2x ehci-s5h2x.1: S5H2XXX ehci setup()
<7>ehci-s5h2x ehci-s5h2x.1: reset hcs_params 0x1111 dbg=0 cc=1 pcc=1 ordered ports=1
<7>ehci-s5h2x ehci-s5h2x.1: reset hcc_params a010 thresh 1 uframes 1024
<6>ehci-s5h2x ehci-s5h2x.1: s5h2x_ehci_setup success
<6>ehci-s5h2x ehci-s5h2x.1: irq 17, io mem 0x30080000
<7>ehci-s5h2x ehci-s5h2x.1: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
<7>ehci-s5h2x ehci-s5h2x.1: init command 010001 (park)=0 ithresh=1 period=1024 RUN
<6>ehci-s5h2x ehci-s5h2x.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<7>usb usb2: default language 0x0409
<7>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: S5H2X On-chip EHCI Host controller
<6>usb usb2: Manufacturer: Linux 2.6.18_SELP-ARM_V403_V6K ehci_hcd
<6>usb usb2: SerialNumber: ehci-s5h2x.1
<6>usb usb2: configuration #1 chosen from 1 choice
<7>usb usb2: adding 2-0:1.0 (config #1, interface 0)
<7>hub 2-0:1.0: usb_probe_interface
<7>hub 2-0:1.0: usb_probe_interface - got id
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 1 port detected
<7>hub 2-0:1.0: standalone hub
<7>hub 2-0:1.0: individual port power switching
<7>hub 2-0:1.0: individual port over-current protection
<7>hub 2-0:1.0: Single TT
<7>hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>hub 2-0:1.0: power on to power good time: 20ms
<7>hub 2-0:1.0: local power source is good
<7>hub 2-0:1.0: enabling power on all ports
<7>drivers/usb/core/inode.c: creating file '001'
<7>hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
<7>ehci-s5h2x ehci-s5h2x.1: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
<7>hub 2-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
<6>ehci-s5h2x ehci-s5h2x.1: ehci-s5h2x probing completed.
<7>ohci-s5h2x ohci-s5h2x.0: S5H2X_OHCI ioremapped : C887A000
<6>ohci-s5h2x ohci-s5h2x.0: S5H2X On-chip OHCI Host controller
<7>drivers/usb/core/inode.c: creating file '003'
<6>ohci-s5h2x ohci-s5h2x.0: new USB bus registered, assigned bus number 3
<6>ohci-s5h2x ohci-s5h2x.0: irq 14, io mem 0x30078000
<7>ohci-s5h2x ohci-s5h2x.0: created debug files
<7>ohci-s5h2x ohci-s5h2x.0: resetting from state 'reset', control = 0x0
<7>ohci-s5h2x ohci-s5h2x.0: OHCI controller state
<7>ohci-s5h2x ohci-s5h2x.0: OHCI 1.0, NO legacy support registers
<7>ohci-s5h2x ohci-s5h2x.0: control 0x083 HCFS=operational CBSR=3
<7>ohci-s5h2x ohci-s5h2x.0: cmdstatus 0x00000 SOC=0
<7>ohci-s5h2x ohci-s5h2x.0: intrstatus 0x00000044 RHSC SF
<7>ohci-s5h2x ohci-s5h2x.0: intrenable 0x8000001a MIE UE RD WDH
<7>ohci-s5h2x ohci-s5h2x.0: hcca frame #0005
<7>ohci-s5h2x ohci-s5h2x.0: roothub.a 02000201 POTPGT=2 NPS NDP=1(1)
<7>ohci-s5h2x ohci-s5h2x.0: roothub.b 00000000 PPCM=0000 DR=0000
<7>ohci-s5h2x ohci-s5h2x.0: roothub.status 00008000 DRWE
<7>ohci-s5h2x ohci-s5h2x.0: roothub.portstatus [0] 0x00000100 PPS
<7>usb usb3: default language 0x0409
<7>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: S5H2X On-chip OHCI Host controller
<6>usb usb3: Manufacturer: Linux 2.6.18_SELP-ARM_V403_V6K ohci_hcd
<6>usb usb3: SerialNumber: ohci-s5h2x
<6>usb usb3: configuration #1 chosen from 1 choice
<7>usb usb3: adding 3-0:1.0 (config #1, interface 0)
<7>hub 3-0:1.0: usb_probe_interface
<7>hub 3-0:1.0: usb_probe_interface - got id
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 1 port detected
<7>hub 3-0:1.0: standalone hub
<7>hub 3-0:1.0: no power switching (usb 1.0)
<7>hub 3-0:1.0: global over-current protection
<7>hub 3-0:1.0: power on to power good time: 4ms
<7>hub 3-0:1.0: local power source is good
<7>hub 3-0:1.0: no over-current condition exists
<7>hub 3-0:1.0: trying to enable port power on non-switchable hub
<7>hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
<7>drivers/usb/core/inode.c: creating file '001'
<7>ohci-s5h2x ohci-s5h2x.1: S5H2X_OHCI ioremapped : C887C000
<6>ohci-s5h2x ohci-s5h2x.1: S5H2X On-chip OHCI Host controller
<7>drivers/usb/core/inode.c: creating file '004'
<6>ohci-s5h2x ohci-s5h2x.1: new USB bus registered, assigned bus number 4
<6>ohci-s5h2x ohci-s5h2x.1: irq 16, io mem 0x30088000
<7>ohci-s5h2x ohci-s5h2x.1: created debug files
<7>ohci-s5h2x ohci-s5h2x.1: resetting from state 'reset', control = 0x0
<7>ehci-s5h2x ehci-s5h2x.1: port 1 high speed
<7>ehci-s5h2x ehci-s5h2x.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
<7>ohci-s5h2x ohci-s5h2x.1: OHCI controller state
<7>ohci-s5h2x ohci-s5h2x.1: OHCI 1.0, NO legacy support registers
<7>ohci-s5h2x ohci-s5h2x.1: control 0x083 HCFS=operational CBSR=3
<7>ohci-s5h2x ohci-s5h2x.1: cmdstatus 0x00000 SOC=0
<7>ohci-s5h2x ohci-s5h2x.1: intrstatus 0x00000044 RHSC SF
<7>ohci-s5h2x ohci-s5h2x.1: intrenable 0x8000001a MIE UE RD WDH
<7>ohci-s5h2x ohci-s5h2x.1: hcca frame #0005
<7>ohci-s5h2x ohci-s5h2x.1: roothub.a 02000201 POTPGT=2 NPS NDP=1(1)
<7>ohci-s5h2x ohci-s5h2x.1: roothub.b 00000000 PPCM=0000 DR=0000
<7>ohci-s5h2x ohci-s5h2x.1: roothub.status 00008000 DRWE
<7>ohci-s5h2x ohci-s5h2x.1: roothub.portstatus [0] 0x00000100 PPS
<7>usb usb4: default language 0x0409
<7>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: S5H2X On-chip OHCI Host controller
<6>usb usb4: Manufacturer: Linux 2.6.18_SELP-ARM_V403_V6K ohci_hcd
<6>usb usb4: SerialNumber: ohci-s5h2x
<6>usb usb4: configuration #1 chosen from 1 choice
<7>usb usb4: adding 4-0:1.0 (config #1, interface 0)
<7>hub 4-0:1.0: usb_probe_interface
<7>hub 4-0:1.0: usb_probe_interface - got id
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 1 port detected
<7>hub 4-0:1.0: standalone hub
<7>hub 4-0:1.0: no power switching (usb 1.0)
<7>hub 4-0:1.0: global over-current protection
<7>hub 4-0:1.0: power on to power good time: 4ms
<7>hub 4-0:1.0: local power source is good
<7>hub 4-0:1.0: no over-current condition exists
<7>hub 4-0:1.0: trying to enable port power on non-switchable hub
<6>usb 2-1: new high speed USB device using ehci-s5h2x and address 2
<7>ehci-s5h2x ehci-s5h2x.1: port 1 high speed
<7>ehci-s5h2x ehci-s5h2x.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
<7>drivers/usb/core/inode.c: creating file '001'
<6>Initializing USB Mass Storage driver...
<7>usb 2-1: default language 0x0409
<7>usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=3
<6>usb 2-1: Product: DataTraveler 2.0
<6>usb 2-1: Manufacturer: Kingston
<6>usb 2-1: SerialNumber: 0604211310520
<6>usb 2-1: configuration #1 chosen from 1 choice
<7>usb 2-1: adding 2-1:1.0 (config #1, interface 0)
<7>drivers/usb/core/inode.c: creating file '002'
<7>hub 3-0:1.0: state 7 ports 1 chg 0000 evt 0000
<7>hub 4-0:1.0: state 7 ports 1 chg 0000 evt 0000
<7>usb-storage 2-1:1.0: usb_probe_interface
<7>usb-storage 2-1:1.0: usb_probe_interface - got id
<6>scsi0 : SCSI emulation for USB Mass Storage devices
<7>usb-storage: device found at 2
<7>usb-storage: waiting for device to settle before scanning
<6>usbcore: registered new driver usb-storage
<6>USB Mass Storage support registered.
<4>Symbol usb_register_driver is being used by a non-GPL module, which will not be allowed in the future
<4>Please see the file Documentation/feature-removal-schedule.txt in the kernel source tree for more details.
<4>Symbol usb_deregister is being used by a non-GPL module, which will not be allowed in the future
<4>Please see the file Documentation/feature-removal-schedule.txt in the kernel source tree for more details.
<4>rtusb 0.97 init ====>
<6>usbcore: registered new driver rt73
<5>  Vendor: Kingston  Model: DataTraveler 2.0  Rev: 1.00
<5>  Type:   Direct-Access                      ANSI SCSI revision: 02
<5>SCSI device sda: 1001472 512-byte hdwr sectors (513 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 0b 00 00 08
<3>sda: assuming drive cache: write through
<5>SCSI device sda: 1001472 512-byte hdwr sectors (513 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 0b 00 00 08
<3>sda: assuming drive cache: write through
<6> sda: sda1
<5>sd 0:0:0:0: Attached scsi removable disk sda
<7>usb-storage: device scan complete
<7>Poller thread started for sda, PID = 263
<3>FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
<4>cifs: Unknown symbol refrigerator
<4>cifs: Unknown symbol mem_map
<4>cifs: Unknown symbol refrigerator
<4>cifs: Unknown symbol mem_map

[tskitishvili]

Happy New Year arris69 ,

I'm back and I can continue experimenting if you haven't lost the interest.