No, if you identified chip correctly, then it means, method is worthless in your case. Forget this.
If you have exlink, you could try to change model number (i`m not sure about patch, might anyone could confirm and tell you full patch to that submenu).
No channel menu
Re: No channel menu
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: No channel menu
not sure if this helps... I did factory reset on a la46c750 (in error) and lost all tuner related menus, all grayed out. and had no channel. Sounds simular to your problem. After much searching and finding no answer I went looking in the menus and got my TV back ( and saved the marriage ) This is what I did.
put it in service menu
start up rusamsungtvcommunicator
press factory 3speed
now under the option menu on the tv there is more options.
Ch Table was blank. I set this to SDMA_AU
restarted tv and now have the ability to rescan for channels...
Hope this helps
put it in service menu
start up rusamsungtvcommunicator
press factory 3speed
now under the option menu on the tv there is more options.
Ch Table was blank. I set this to SDMA_AU
restarted tv and now have the ability to rescan for channels...
Hope this helps