D series rooting (arm cpu architecture only)

[arris69]

...

approximately 2h, Tried to adjust 03_03_nfsmount without success. Had I then looked at a few videos on Youtube about the subject. There was in the SamyGO surface a second time when she starts a lot of entries. For me there is only the console is that correct? or there is already a problem?

for nfs mounts normaly you don't need to change anything in the scripts... (just setup a working nfs server in your network)
for windows sahres you need to add your username and password to samba-mount script 04_04_samba.init ...

hth
arris

[juusso]

Yes, SamyGO is ok. You don`t need any other widget for get root.

[caesar68]

Thanks for the SamyGo extension!
I have an UE55D7090 with 1015 firmware. It works wonderful for about 2 month with nfs access to my DS212j. But since 2 weeks - after starting SamyGo - I had a static folder/file structure in virtual USB. Even if I add a new file/folder on the DS212j, it does not appear in virtual USB. I have no idea, what happens. With my ubuntu PC I have access via nfs and all is fine - as it should. If try to use DLNA with my TV, I have also the old filestructure, as it was 2 weeks ago...
I could access to DS212j with tablet, smartphone ... I see everytime the right file structure - but not with TV.
So my last hope is, that somebody have an idea what happens here...

[juusso]

I think your Ace.dat file is filled up (known Samsungs limitation) and new files aren`t being scanned/added.
Remove this file (over ftp) and let TV scan your network resources again.

Code: Select all

/mtd_contents/database/Ace.dat

[caesar68]

I think your Ace.dat file is fulled up

Bingo! Thanks a lot. Now it works fine again.

[arris69]

06. Feb. 2012 widget server down due to server maintenance (13:00 - 17:00 CET)
machine got new case

[ailiev]

The cosmos is really a nice chassis! greets

[ailiev]

OK I really need help with the NFS setup -- Its a little bit unclear where should the shares be showin.

I have DS320 and NFS enabled. I want to make my tv to see the shares, but when i start samygo everything shows OK, but on the Virtual USB device all I see is the UPnP devices that I have - AllShare and Servioo

Where do I see the contents of a NFS share?

Also, I played with the nfs_mount script, added the IP of the NAS but still nothing.

I also tried to disable djmount too (bu renaming to init.dis)

the setting is SHARES="Volume_1" but I also tried with /Volume_1

Ideas?
-----------------------
EDIT: OK I did managed to see the nfs folder in the VIrt Device, then there is the NFS server ip address and then the share name (for example _Volume_1 - the original is /Volume_1) but there are no files into this folder...what am i doing wrong?