Just tried it today on my EW-7711UAn nlight (vid_7392 pid_7711) used 3070sta.ko and 3370sta.ko with bad results. I managed to see the setup dialog for WiFi . TV cant see any networks. Specifying configuration manually doesn't help either. Tried with WPS2 AES and WPS TKIP . I took a look into dmesg. And heres what I saw. Maybe someone can help.?
- Code: Select all
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
===> rt28xx_close
RT28xxUsbMlmeRadioOFF()
ERROR!!! H2M_MAILBOX still hold by MCU. command fail
RTMPSetLED::Mode=1,HighByte=0x00,LowByte=0x01
ERROR!!! H2M_MAILBOX still hold by MCU. command fail
==> MlmeHalt
--->Disable TSF synchronization
ERROR!!! H2M_MAILBOX still hold by MCU. command fail
RTMPSetLED::Mode=1,HighByte=0x00,LowByte=0x00
MlmeHalt
MacTableReset
ERROR!!! H2M_MAILBOX still hold by MCU. command fail
RTMPSetLED::Mode=1,HighByte=0x20,LowByte=0x01
--->RTUSBCancelPendingBulkInIRP
-RTUSBCancelPendingBulkInIRP
Terminate the task(RtmpMlmeTask) with pid(4966)!
-MlmeThread
Terminate the task(RtmpCmdQTask) with pid(4967)!
-RTUSBCmdThread
Terminate the task(RtmpTimerTask) with pid(4965)!
-RtmpTimerQThread
---> RTMPFreeTxRxRingMemory
- RTMPFreeTxRxRingMemory
= rt28xx_close
[SERIAL INPUT MANAGE] Managed tty_struct(.name:ptm1) is freed !!!
[SERIAL INPUT MANAGE] Managed tty_struct(.name:ptm1) Setup!!!