[solved]LT24A550 Wifi Enabled Done

[juusso]

yes, the 1 changes the setting up, the 0 - down. You have to confirm your setting with entering 99
After this you can power off your TV (or don`t power off )

[Lobstar]

Hi, do you know how enable hidden menu from telnet?

[juusso]

not from telnet, but from TOP Debug menu over serial connection trough ExLink (vga).

[Lobstar]

ok, i'm finally make ExLink. So how enable hidden service menu from Top Debug?

[DiN0]

Hi,

i think its point 2 in Factory-Debug-Menu:

factory debug:


but i did not test it yet.

[Lobstar]

No, it's just print status of Hidden Menu - disabled

[Her71]

Now im using Serviio over DLNA with my LT24A550 and its work fine
I can see online content eg(you tube) using my laptop as server

I have made a lot of research but i think thats all we can get from this set

Shell access is present but its have character filter
Trying to patch memory to have full shell access, found options to read write register values but its only retrieve one value at time , i thinking about write some vb program to make a complete dump of memory, but may be too much work for nothing.
There is no firmware update on the web for this set , so i cant try to decryt an debug it.

Hotel mode hack , emergency sh , dont work , the set dont recognize ext3 partirtions
i have patched clone.dat to copy a script to rwarea , but i cant confirm that copy works because i dont have access to read the partition.

In debug menu ther is a lot of options 3D , IPTV , PVR , Yahoo , Web Browser, etc but there do nothing , probably because there is no software/hardware installed .

From this point any ideas / help will be apreciated

[adrianp03]

Does anyone know if any model of Hama wifi is compatible ? I have to look for something particular?
Thanks.

[zeninguem]

i'm really interested hacking this model, but the only way to enable "hidden service menu" is through exlink?? i cant be done without the cable??? thx and sry for bad english.

[joaofeijo]

hi,
I have an lt27a550 and i will try to hack with exlink
Yesterday i entered the service menu with the regular remote and i didn?t find the options :
- Network support
- All Shares support
Do they just appear with the use of the all in one remote ?
I already ordered an exlink am i going to need also the remote or just the exlink will be ok ?