these model is supported by samygo

[davidtuti]

Your problem could be solved (vanished picture) by selecting Lvds Format" to "VESA" in service menu. Seems, your problem is like:
viewtopic.php?f=24&t=3617&p=27847#p27832
viewtopic.php?f=20&t=3837&p=29505#p29476

p.s.
If you get picture reversed, go Control --> Config option --> HV flip" and set it to "Off"

Thanks.
When I restart the first time I don't have sound. I do the wiki:

Code: Select all

11. Go to: Sound - High Devi - ON 12. Enter to Control - Config Option and change
HDMI to 1 
Headphone to 0

Wich option is HDMI? There ara some option with the word HDMI.

Thanks again

[juusso]

i definitelly don`t know what option are you trying to change. Take photo of that service submenu.

[davidtuti]

i definitelly don`t know what option are you trying to change. Take photo of that service submenu.

Thanks again. These is the configuration:

[juusso]

how many hdmi ports do you have?
On the second photo - Set the number on Num of HDMI (curentlly set to 4)

[davidtuti]

how many hdmi ports do you have?
On the second photo - Set the number on Num of HDMI (curentlly set to 4)

It seem that 3.
I set 3 in the Num of HDMI but continous without sound.

[juusso]

I just advice you to check twice what you have compared to that wiki article. I don`t have ideas at time.
hdmi count has nothing common with sound.

[davidtuti]

I just advice you to check twice what you have compared to that wiki article. I don`t have ideas at time.
hdmi count has nothing common with sound.

Thanks.
But when they say:

Code: Select all

11. Go to: Sound - High Devi - ON 12. Enter to Control - Config Option and change
HDMI to 1 
Headphone to 0

These options doesn't exits.

[davidtuti]

I've change the model to my model (PC450) and I see that the options of suboptions have several changes. I don't know if there is some change of these that can enable the sound.