BD-ES6000 Region Hack

Samsung's BluRay player related hacks.
Post Reply

Eagle
Posts: 30
Joined: Wed Nov 14, 2012 3:08 pm

Re: BD-ES6000 Region Hack

Post by Eagle »

Hi you both,

thanks!

Well this goes a lil more into electronics profession, the 100 ohms resistors u mentioned first I need to get them and then I just put them between the rx-Tx cross?
Top
oga83
Posts: 268
Joined: Sun Mar 18, 2012 10:11 pm
Location: France

Re: BD-ES6000 Region Hack

Post by oga83 »

The resistors should be placed in series on both RX and TX signals :
- MainBoardTXD-100ohmsResistor-CableRX
- MainBoardRXD-100ohmsResistor-CableTX
- MainBoardGND-CableGND
Top
Eagle
Posts: 30
Joined: Wed Nov 14, 2012 3:08 pm

Re: BD-ES6000 Region Hack

Post by Eagle »

so u mean i directly connect to that usb port adapter on the side where it is connected to the MoBo? So I just need one cable? Just crossing the cable right on the connect pins got it.
Top
oga83
Posts: 268
Joined: Sun Mar 18, 2012 10:11 pm
Location: France

Re: BD-ES6000 Region Hack

Post by oga83 »

Eagle wrote:so u mean i directly connect to that usb port adapter on the side where it is connected to the MoBo? So I just need one cable? Just crossing the cable right on the connect pins got it.
Yes, just one USB/Serial cable connected to main board through 100 ohms resistors.
See also this
Top
Eagle
Posts: 30
Joined: Wed Nov 14, 2012 3:08 pm

Re: BD-ES6000 Region Hack

Post by Eagle »

I found some resistors, but I think they are wrong.. One pack says CR25 - 1/4 WJ and with a blue stamp beside the ohm icon 68k

the other pack also CR25 - 1/4 WJ but 1M beside ohm icon

Can I use one of this kind or do I need to buy some? Sry I'm not an electric professional..

EDIT:

Oh and one thing is there some kind of connection pin or so for this kind or do I need to use the soldering bolt?
Top
oga83
Posts: 268
Joined: Sun Mar 18, 2012 10:11 pm
Location: France

Re: BD-ES6000 Region Hack

Post by oga83 »

Eagle wrote:Can I use one of this kind or do I need to buy some? Sry I'm not an electric professional..
No, 68k and 1M are too high values...

If you feel confident enougth, you can try without the resistors : only connect [MainBoard-GND to Cable-GND] and [MainBoard-TXD to Cable-RX] to check you have data at boot time

As you have pass-through holes on your PCB, you can test the connection without soldering : just insert cables in the holes, bended in order to have a good contact.
Top
Eagle
Posts: 30
Joined: Wed Nov 14, 2012 3:08 pm

Re: BD-ES6000 Region Hack

Post by Eagle »

ok thank you, I guess I gonna try it. But what do you exactly mean with
to check you have data at boot time
What do I have to do? Using the FaNet Software or Commandline for Serial Consol?
Top
oga83
Posts: 268
Joined: Sun Mar 18, 2012 10:11 pm
Location: France

Re: BD-ES6000 Region Hack

Post by oga83 »

Eagle wrote:ok thank you, I guess I gonna try it. But what do you exactly mean with
to check you have data at boot time
What do I have to do? Using the FaNet Software or Commandline for Serial Consol?
With putty (or hyperterminal or equivalent), using the settings below, you should see log text when you boot your device :)
Aditional info in the wiki here
oga83 wrote:You can first start with only TXD (connected to RX on your cable) and GND, and check that you see something at boot time.
For the connection settings, use 115200 bds, 8 bits, 1 stop, no parity and no flow control.
Top
Eagle
Posts: 30
Joined: Wed Nov 14, 2012 3:08 pm

Re: BD-ES6000 Region Hack

Post by Eagle »

Ok thank you!! Will do and report back how it work out.
Top
Eagle
Posts: 30
Joined: Wed Nov 14, 2012 3:08 pm

Re: BD-ES6000 Region Hack

Post by Eagle »

Code: Select all

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.12.07 13:40:58 =~=~=~=~=~=~=~=~=~=~=~=
 
BCM76400010 SERIES 
PRODUCT ID 76410011
RV1L3
Setting NAND Params

MIPS starting from cache 
Chip specific init
TLB init
Board init
Starting memory configuration

 Doing SHMOO now 


DDR40 PHY32020103 20110901 

MTEST MIPS Addr C0001C00 40001C00 E0001C00 20001C00 
PHY REG@ 01805000 WL COUNT 2 



RD_DLY rev 1.0 Step for WL0 4 

RD_DLY rev 1.0 Step for WL1 4 


RD EN  ver 2.0 Step for WL0 36 

RD EN  ver 2.0 Step for WL1 55 




WR DM rev 2.0 BL step for WL0 12 

WR DM rev 2.0 BL step for WL0 14 


WR DM rev 2.0 BL step for WL1 13 

WR DM rev 2.0 BL step for WL1 14 


RTS compatible for 76410011
Enable DDR encryption
SoooooR
Preparing to copy code to RAM
CDB5B55C
NAND loading completed
1000045F
00000000
56

Starting code in RAM
Booting Secured CFE... 
BCM97640 B0-SEC  CFE v2.1.24 (CFE core v2.1, BSP_REV 24), Endian Mode: Little
Build Date: Wed May 30 18:50:04 KST 2012 (bdvdbuild@VDBS1022)
Copyright (C) Broadcom Corporation.
CFE starting from ROM

Flash_Strappings           : bch-24, oob=54, sec=1k;  8K page, >= 4Gbit
nandedu_set_size: Fixing NAND size info in CONFIG (dev=2048MB, page=8192, block=1024Kb, origCFG=0x49352300, newCFG=0x59352300)

Reading flash0.macadr to V:xxxxxxx from offset 0 len 144 
DDR                        : Bank0:512MB@800MHz | Bank1:256MB@800MHz 
NAND Boot                  : FlashSize 2048MB on CS0, BlkSize 1024KB, PgSize 8192B
NAND Boot                  : BCH-24, thresh=18, oob=54, sector=1024
NAND vendor timing         : ecd58472 SAMSUNG K9GAG08U0E MLC  t1(43646234) t2(80000b7a)
Secure boot                : secure boot enabled, BSECK unlocked
Reading flash0.macadr to V xxxxxx
Reading flash0.rawnvr to V:xxxxxx

Timestamp started ...
No E5900 Model. 
booting ARM...
Reading flash0.ofefw.2 to V:0x80000000 from offset 0 len 1048576 
Reading flash0.ofews.0 to V:0x800c0000 from offset 0 len 32768 
Reading flash0.ofews.1 to V:0x800c8000 from offset 0 len 32768 
Initializing OFE...
ofefw@0x5fd00000 
OFE ARM Initialized and Booted

Elapsed time  139mS (139184 uS) 

Set tmds control(E6500/6700 Model)

Display splash screen
Using valid user input parameters - Resolution 480p on Component 
[ Default Video ] :  Current Video Output : Component @ Resolution : 480p 
Loading NTSC SD image only to 0x0f646c00 size 691200 bytes
Reading flash0.splash to V:0xaf646c00 from offset 0 len 691200 
Splash image at 0f646c00 rul addr 0f711400
BVN Config
HDMI Config
VEC Config
Done displaying splash screen
Loader:elf Filesys:raw Dev:flash0.vmlinux.0 File: Options:quiet
Loading: 0x80008000/4653312 0x80478100/632160 
Successfully loaded secure elf image....
Entry address is 0x8000c390
Starting program at 0x8000c390

[    0.000000] [VDLP] preset_lpj manual set to 249344
rwarea mounted on /dev/mtdblock18
 >>>>> rootfs_bsp version is ver_2011-07-08 6:22pm for 7641 - front.ko_0.06 >>>>>
rcS: BDVD_BOOT_AUTOSTART<y>  BQ<y>  BAPP<./app_player>  BAPP_OUT</dev/console>  BNET<>  BNET_DLY<0> OFE_SB<n>
 >>> exe.img boot partition is 1 >>>
mount: block device /dev/romblock17 is write-protected, mounting read-only
mount: block device /dev/romblock21 is write-protected, mounting read-only
Mounting tmpfs on /dev/shm
mtd_contents mounted on /dev/mtdblock7
rm: cannot lstat `/tmp/*': No such file or directory
Fri Jan  1 00:00:00 UTC 2010
Front Driver Insmod
BCM Driver Insmod
insmod: can't read '/lib/modules/bcmdriver.*o': No such file or directory
[    1.874000] BCMDRV: Initializing bcmdriver version $ bdvd_v3.0/bdvd_v4.0/2 $
[    1.881000] BCMDRV: Using Interrupt Definition for 7640B0 (uname -a)
[    1.887000] BCMDRV: Total intc words=2,Total Irqs=65
[    1.893000] BCMDRV: Initialization complete...
rcS: WARNING: could not chdir find 'bdvd_custom_target_prep.sh'.
export bdvd define
Enable HW CTS Control enabled
exeDSP START
[    2.781000] eth0 cable unplugged, powering down
##### System Execution!!! #####
FAST INIT
>>>>>>>>>>>>>>>> File : /mtd_rwarea/dtvapp_store.dat  , /mtd_rwarea/flashCount 
TD & OD Builder Completed !!!
[CEC] ~~~ Create(strMicomInterface) 
SsMem Building
 SsOpticalObject::SetInstance !!!![1] 
 SS Object is created !!!! 
SS OPTICAL BUILD DONE!!
		>>> t_CheckSystemNormal 0
		>>> t_CheckFastBoot 1
============ CHECK FAST BOOT Exception ===========


	## Core Software Platform (TM) 1.1 : DTP-SP-0101 (RELEASE)
	## (_USE_SYSTEM_TIME_ : N)(__CSP_UCLIBC__)
		 Copyright (C) SAMSUNG Electronics Co.,Ltd.


CSP No sched_yield()
TCMW::Initialize() end
@@@ Elapsed time (    0.610) - [HostMgr_PrintEvaluateTime] Host_Main Start        


Build Date: Jul 31 2012  10:42:12
[t_GetModelName] find '-' >>>>>>
Model Type : E6500
sByerName Type : ZA
E6500 Model_ZA : ModelModel Number ====> 0x1201
[t_GetModelName] If there is no version file, Appdata Ver is APPDATA_VER_0001 >>>>>>
 model_name : 0x1201 !!! 
@@@ Elapsed time (    0.619) - [HostMgr_PrintEvaluateTime] Mopt_LoadModelOptions  
@@@ Elapsed time (    0.629) - [HostMgr_PrintEvaluateTime] HostMgr_LoadSystemParameter 
---> [SystemHal_CheckPowerState][499] STH Debug NET_UPDATE_OFF !!! 
commandline read: exeDSP
(!) DirectFB/Config: Unknown option '--dfb:mouse-source'!
@@@[AUDIO] [BdsAudioLimitation.cpp][SetEncoderForceOutputFormat][136]	[32m bdvd_audio_enable_enc_force_output_format. [0m
@@@[AUDIO] [BdsAudioLimitation.cpp][SetAnalogMultiChannelDisable][142]	[32m disable the bdvd_audio_output_multich. [0m
[32m SDAL DTS CORE ONLY FLAG SETTING FALSE. 
@@@[AUDIO] [BdsAudioLimitation.cpp][SetDTSCoreOnlyToSDAL][58]	[32m SetDTSCoreOnlyToSDAL 0. [0m
@@@[AUDIO] [SsAudio.cpp][SsAudio_SetConfig][90]	 AUDIO FULL FEATURE !!!!!!!!! 


****************************************************************
################################################################
BRCM PKG : PKG_DVD_4_0_067_RC 
################################################################
****************************************************************

### BCHP_Open7640: Set RAP ZSP Clock speed as 351Mhz
### BCHP_Open7640: Turning off TRB bus client to prevent interference seen during 7642 chip bringup
### BCHP_Open7640: Setting CEC_ADDRxx register fields to 0x15 (Unregistered) address
### bdvd_bmem_init_heaps: 3D graphics and video will be supported

 Heaps created for 512M memcfg
Heap VDC Handle 0x05f44240, PA 0x20000000/512M, Size 0x01800000/ 24M BW 1
Heap XVD Handle 0x05f45088, PA 0x21800000/536M, Size 0x03c00000/ 60M BW 1
Heap SUB Handle 0x05f45528, PA 0x25400000/596M, Size 0x01480000/ 20M BW 0
Heap XPT Handle 0x05f459e8, PA 0x26880000/616M, Size 0x00340000/  3M BW 0
Heap RAP Handle 0x05f45ea8, PA 0x26bc0000/619M, Size 0x00c00000/ 12M BW 0
Heap CTX Handle 0x05f46368, PA 0x0e000000/224M, Size 0x01000000/ 16M BW 0
Heap PBK Handle 0x05f46828, PA 0x0f000000/240M, Size 0x00a00000/ 10M BW 0
Heap GPI Handle 0x05f46ce8, PA 0x50000000/1280M, Size 0x01300000/ 19M BW 0
Heap GFX Handle 0x05f471a8, PA 0x51300000/1299M, Size 0x0e600000/230M BW 0

### 
dsp = 0, cmdq baseaddr = 36778f00, cmdqsize = 2280, cmdqfifoid = 0

### 
dsp = 1, cmdq baseaddr = 3677e340, cmdqsize = 1520, cmdqfifoid = 0

### bdvd_audio_p_register_downmix_rbuf_client: client=0
### bdvd_audio_output_open_sound failed -- audio_output_settings.state != bdvd_audio_output_state_open


Blast B1, so NOT turning off avd_outloop round robin
enabling realtime scheduling
### OS_TaskSpawnParam: VCTimerThread00 thread created with stacksize of 32 kbytes (requested 16k stack)
### OS_TaskSpawnParam: VCTimerThread01 thread created with stacksize of 32 kbytes (requested 16k stack)
### OS_TaskSpawnParam: Thread 'W__EventTask' stack size (4096) < Linux min (16384), using default (131072) instead!
### OS_TaskSpawnParam: W__EventTask thread created with stacksize of 144 kbytes (requested 4k stack)
Using Verance Cinavia Version dref_ss1-4_v5-4_242
### Configuring external audio DACs on i2c Channel 2


Blast B1, keep Cabac heap to AVD heap
*bdvd_init(BDVD_VERSION) 0!

>>>>>>>>>>>>>> Call function[SdGfx_Init]...104
================================
   * Model Name       :  BD-E6500 

   * BDP SW Version   :  BSP-E6500WWB-1052.0 

================================
enabling realtime scheduling
B_Osal_TaskSpawnParam:	VCTimerThread00, 48
B_Osal_ProtoTimerCreate - 0 Launched VCTimerThread00 with PID 101926072
@@@[ERROR!!!-SYSTEM] [SsFrontHal.cpp][FrontHalB_StartInit][711] ::	
##### FrontHal_StartInit #####
B_Osal_TaskSpawnParam:	Front_main, 32
B_Osal_TaskSpawnParam:	SsAVManagerMain, 32
@@@[ERROR!!!-PVR] [SsAVManager.cpp][SsAVManagerInit][60] ::	Video Manager task create success..
 OD system Init 
>>>>>>>>>>>>>> Call function[SdDemux_Init]...56
>>>>>>>>>>>>>> Call function[SdPostSoundBD_Init]...85
>>>>>>>>>>>>>> Call function[SdExtOut_Init]...68
CDRET SamShare::t_InitVideo(uint32_t u32Config) 2

 Video File Version 1.0 
/home1/ym2.jang/BRCM7641_Release/PRD//SDAL_BRCM/BRCM7641/API/SdVideoGfx.cpp: enter SdVideoGfx_Init
/home1/ym2.jang/BRCM7641_Release/PRD//SDAL_BRCM/BRCM7641/API/SdVideoGfx.cpp: leave SdVideoGfx_Init
>>>>>>>>>>>>>> Call function[SdVideo_SetDisplayHandle]...2308
SdVideo_VideoVisible[164]: ERROR ## Video Window handle NULL
[SsAVManager_AVinit] 97 :: After Main Scaler Created !!! 
OD System Init DONE !!!
>>>>>>>>>>>>>> Call function[SdVideo_SetDisplayHandle]...2308
>>>>>>>>>>>>>> Call function[SdVideo_SetFunc_CloseWindowForMdal]...2320

Video Init ---> Delay 200ms,Because of Boot fail
---> BDS Gfx[SetGfxLayerSize][4427] w : 1920 , h : 1080
[#ERROR#][Broadcom_Screen32.cpp][SetLayerSize][2247] Layer is NULL !!!
[#ERROR#][Broadcom_Screen8.cpp][SetLayerSize][1465] Layer is NULL !!!
CecInputInterface is created~!
ToDO : Check m_oCecInput->Create(), *** m_poCecInputInterface->Create(); in SsHdmiOut.cpp ***  
KeyInputInterface is created~!
Start KeyInput::t_Main.
Start...
Shadow 2.6 (revision number: DTP-BP-GFX-0343-BRCM7641_BDP_E5900-02-Release) is being initialized.[[[[[[ ShadowSS Initialize ]]]]]]

   ~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.4.5 Phase 4.0 Prerel |~~~~~~~~~~~~~~~~~~~~~~~~~~
        (c) 2001-2010  The world wide DirectFB Open Source Community
        (c) 2000-2004  Convergence (integrated media) GmbH
      ----------------------------------------------------------------

(*) DirectFB/Core: Single Application Core. (2012-07-30 02:05) 
>>>>>>>>>>>>>> Call function[SdVideo_SetCaptureWindowHandle]...2296
>>>>>>>>>>>>>> Call function[SdVideo_SetWindowHandle]...2284
### NEXUS_Base_Core_Init should be called prior to NEXUS_Base_Init
[ROSE_MW    ] FunctionMapper[CreateAudioDecoder, 0xddd0f0]
[ROSE_MW    ] FunctionMapper[CreateAudioRenderer, 0xddd260]
[ROSE_MW    ] FunctionMapper[CreateContainer, 0xddd3d4]
[ROSE_MW    ] FunctionMapper[CreatePicturePlayer, 0xddd600]
[ROSE_MW    ] FunctionMapper[CreatePlayer, 0xddd4ac]
[ROSE_MW    ] FunctionMapper[CreateVideoDecoder, 0xddd1a8]
[ROSE_MW    ] FunctionMapper[CreateVideoRenderer, 0xddd31c]
[ROSE_MW    ] FunctionMapper[GetSystemClockTick, 0xddd7b0]
[ROSE_MW    ] FunctionMapper[GetUniPlayerMediator, 0xddd6c8]
[ROSE_MW    ] FunctionMapper[UniPlayer_ClearScreen, 0xd6cb74]
[ROSE_MW    ] FunctionMapper[UniPlayer_PfmInterfaceDebugMenu, 0xe02fbc]
[ROSE_MW    ] FunctionMapper[UniPlayer_PlayerDebugMenu, 0xddaf50]
[ROSE_MW    ] FunctionMapper[UniPlayer_YUVToJPEG, 0xda0978]
[7s 268ms][DEBUG][CUniPlayerMediator][53] 
[7s 280ms][DEBUG][InstallVBIDataCallback][2500] 
[7s 280ms][DEBUG][InstallICTCallback][2507] 
[7s 281ms][DEBUG][InstallResolutionCallback][946] 
[7s 281ms][DEBUG][InstallDOTCallback][2518] 
[7s 281ms][DEBUG][InstallUserDataCallback][323] REQUEST :: INSTALL [ CALLBACK(0xcdb738) PARAM((nil)) ]
@@@[ERROR!!!-AUDIO] [BdsAudioDriver.cpp][AvOut_AudioOutputCallback][371] ::	
Now System initializing now
SdBoot already uninitialized 
(*) bcmNexus/HM: Broadcom Best Fit Heap Manager 1.0
@@@[ERROR!!!-AUDIO] [BdsAudioDriver.cpp][AudioDriver_GetAudioSubCodec][3271] ::	NOT YET INITIALIZED...
@@@[ERROR!!!-AUDIO] [SsAudio.cpp][AudioDrv_GetAudioSubCodec][1639] ::	AudioDrv_GetAudioSubCodec Error result = -1
(*) Direct/Thread: Started 'Hotplug with Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <1048576>...
(*) DirectFB/Input: Hot-plug detection enabled with Linux Input Driver 
(*) DirectFB/Graphics: Broadcom Corporation bcmnexus_gfx 3.3 (Broadcom Corporation)
(*) Direct/Thread: Started 'BRCM FrameBuffer 0' (-1) [OUTPUT OTHER/OTHER 0/0] <1048576>...
(*) Direct/Thread: Started 'BRCM FrameBuffer 1' (-1) [OUTPUT OTHER/OTHER 0/0] <1048576>...
(*) Direct/Thread: Started 'BRCM FrameBuffer 2' (-1) [OUTPUT OTHER/OTHER 0/0] <1048576>...
(*) DirectFB/Core/WM: SaWMan 0.2 (directfb.org)
(*) SaWMan: Initializing stack 0x6152570 for tier 0x6151428, 0x0, layer 0, context 0x6152328 [1]...
(*) SaWMan/Init: Layer  0:  1920x1080, ARGB, options: 21
(*) SaWMan/Init: Border 0:  1920x1080, ARGB, options: 8
B_Osal_TaskSpawnParam:	SmartHubFlushMain, 1
[Broadcom_Screen8.cpp][UpdateScreen_8bit][118] screenNumber[2] is disabled 
[Broadcom_Screen8.cpp][UpdateScreen_8bit][118] screenNumber[3] is disabled 
[Broadcom_Screen8.cpp][UpdateScreen_8bit][112] screenNumber[5] is released 
[Broadcom_Screen8.cpp][UpdateScreen_8bit][112] screenNumber[6] is released 
@@@ Elapsed time (    3.419) - [HostMgr_PrintEvaluateTime] 	PharosAgent_InitializeGraphics 
@@@ Elapsed time (    3.423) - [HostMgr_PrintEvaluateTime] 	SystemMWIF_InitSystem 
@@@[ERROR!!!-HDMI] [SsHdmiHal.cpp][SsHdmiCreate][114] ::	[HDMI] HDMI Created........
B_Osal_TaskSpawnParam:	SsHdmiMain, 32
@@@[ERROR!!!-HDMI] [SsHdmiHal.cpp][SsHdmiCreate][138] ::	Manager task create success..
[HDMI] HDMI Task Created........
@@@[ERROR!!!-HDMI] [SsHdmiHal.cpp][SsHdmiTaskInit][556] ::	[HDMI] HDMI Task Initialized........
[HDMI] HDMI Transmitter Initialized........
 [Device_LoaderInitial] : Create the loader
### Loader info: cVendor='SAMSUNG  ', cModel='SPE-510          ', cFirmwareVersion='0115'
loader_model=510 
@@@ Elapsed time (    3.488) - [HostMgr_PrintEvaluateTime] 	LoaderMW_Create       
@@@ Elapsed time (    3.488) - [HostMgr_PrintEvaluateTime] HostMgr_SystemInitialize 
@@@ Elapsed time (    3.488) - [HostMgr_PrintEvaluateTime] HostMgr_PlatformInitialize Start 
==============================GetTime
epoch_time = 1262304006
==============================SetTime
SsHdmiMain @ 254: HDMIE_MSG_HDMI_HOTPLUG
@@@ Elapsed time (    3.510) - [HostMgr_PrintEvaluateTime] 	 Vfs_Open             
@@@ Elapsed time (    3.510) - [HostMgr_PrintEvaluateTime] 	 HostMgr_PSMInitialize 
@@@ Elapsed time (    3.510) - [HostMgr_PrintEvaluateTime] HostMgr_PlatformInitialize 


Call PharosAgent_InitializeApplications 


@@@[ERROR!!!-HDMI] [BdsHdmiDriver.cpp][BdsHdmiAudioMute][1636] ::	BdsHdmiAudioMute Hdmi is not connected : Force set to mute 
@@@[ERROR!!!-HDMI] [BdsHdmiDriver.cpp][BdsHdmiVideoBlackScreen][1682] ::	BdsHdmiVideoBlackScreen Hdmi is not connected : Force set to mute 
@@@[ERROR!!!-HDMI] [SsHdmiHal.cpp][SsHdmiMain][274] ::	SsHdmiMain @ 274: Changing state to UNENCRYPTED
@@@[ERROR!!!-HDMI] [SsHdmiHal.cpp][SsHdmiConnectCable][850] ::	Physical Address : 2.0.0.0 
@@@[ERROR!!!-HDMI] [SsHdmiHal.cpp][SsHdmiConnectCable][863] ::	>>>>>>>>>>>>>>>>>>Hdmi cec connected...............Address : 0x20 0  >>>>>
 Start Hmdi CEC  AB: 0x20, CD : 0x0   SendHDMICECHotPlugMsg
@@@ Elapsed time (    3.517) - [BDMWI_PrintEvaluateTime] 	 PharosAgent_InitializeApplications start 
ProfileManager::t_CompareMagicKey() line[644]	Offset 0 Size 4]

ProfileManager::t_CompareMagicKey() line[652]	CRC: 82251429, magicKey: 82251429
ProfileManager::Init() line[108]	Mark 7882

@@@ Elapsed time (    3.547) - [BDMWI_PrintEvaluateTime] 	 EMS & PMS              
0 (4294967295): Initialize Cubic Motion profile DTP-BP-GFX-0343-BRCM7641_BDP_E5900-02-Release




[DTVInputService::t_Create] m_nKeyInputTime = -944396


[Broadcom_Screen8.cpp][SetPalette][1316] Skip Depend SetPalette
[Broadcom_Screen8.cpp][SetPalette][1316] Skip Depend SetPalette
[TCFactory::GetOption] unknown option called = 46
SsHdmiParsingEDID
BdsHdmiParsingEDID - EDID Read OK 
=========================EDID Data=======================
 CEC Physical Address : 2.0.0.0 
 Man ID : 4c2d, Product ID : c507 ,  Serial NO : 01000000 

Supports YCbCr colorspace:
==========================
	Supports xvYCC601
  Supports xvYCC709
	Deep Color YCC is Supports 
	Deep Color 30bits/36bits are Supports/Supports 
	MaxTmdsClock is 225 

CEC Phy Addr: 2.0.0.0
Supported Video Formats:
========================
  bdvd_video_format_480p
  bdvd_video_format_576p
  bdvd_video_format_1080i
  bdvd_video_format_1080i_50hz
  bdvd_video_format_1080p
  bdvd_video_format_1080p_24hz
  bdvd_video_format_1080p_30hz
  bdvd_video_format_720p
  bdvd_video_format_720p_50hz
  bdvd_video_format_1080p_25hz
  bdvd_video_format_1080p_50hz
  bdvd_video_format_1080p_24hz_3d
  bdvd_video_format_720p_3d
  bdvd_video_format_720p_50hz_3d

Supported Audio Formats: 
========================
@@@[ERROR!!!-HDMI] [BdsHdmiDriver.cpp][BdsHdmiParsingEDID][310] ::	Format:PCM, CH No:02, SampleFreq:UpTo48K(07), SampleSize:UpTo24Bits 
BdsHdmiCheckFirstLink - StoredSinkSupportVidRes-003f 
BdsHdmiCheckFirstLink - StoredSinkManID-4c2d 
BdsHdmiCheckFirstLink - StoredSinkProductID-c507 
@@@[ERROR!!!-HDMI] [BdsHdmiDriver.cpp][BdsGetSupportVideoResolution][1282] ::	ERROR. param is invalid (2031679) !!! 
@@@[ERROR!!!-HDMI] [BdsHdmiDriver.cpp][BdsGetSupportVideoResolution][1282] ::	ERROR. param is invalid (2031679) !!! 
@@@[ERROR!!!-HDMI] [BdsHdmiDriver.cpp][BdsGetSupportVideoResolution][1282] ::	ERROR. param is invalid (2031679) !!! 
@@@[ERROR!!!-HDMI] [BdsHdmiDriver.cpp][BdsGetSupportVideoResolution][1287] ::	
Support Resolution(1f003f)

### Same Sink ###
@@@[ERROR!!!-HDMI] [BdsHdmiDriver.cpp][BdsHdmiCheckFirstLink][2487] ::	BdsHdmiCheckFirstLink - End(0) 
@@@[ERROR!!!-HDMI] [BdsHdmiDriver.cpp][BdsGetSupportVideoResolution][1282] ::	ERROR. param is invalid (2031679) !!! 
@@@[ERROR!!!-HDMI] [BdsHdmiDriver.cpp][BdsGetSupportVideoResolution][1282] ::	ERROR. param is invalid (2031679) !!! 
@@@[ERROR!!!-HDMI] [BdsHdmiDriver.cpp][BdsGetSupportVideoResolution][1282] ::	ERROR. param is invalid (2031679) !!! 
@@@[ERROR!!!-HDMI] [BdsHdmiDriver.cpp][BdsGetSupportVideoResolution][1287] ::	
Support Resolution(1f003f)
HDMI hotplug : hdmi active(0),hdmi authenticated(0),Hdmi highest resol(4),hdmi bd wise support(1),hdmi 24frame support(1)@@@[ERROR!!!-HDMI] [SsHdmiHal.cpp][SsHdmiMain][448] ::	SsHdmiMain: HDMIE_MSG_HDMI_CABLE_IN 
@@@[ERROR!!!-HDMI] [SsHdmiHal.cpp][SsHdmiConnectCable][850] ::	Physical Address : 2.0.0.0 
SsHdmiMain @ 254: HDMIE_MSG_HDMI_HOTPLUG
@@@[ERROR!!!-HDMI] [SsHdmiHal.cpp][SsHdmiMain][288] ::	SsHdmiMain @ 288: ERROR -- Invalid State (), dropping HOTPLUG message!

 !!! eDeterminedVideoFormat = 6eVideo3DMode = 5
[DEFAULT/Warning] 0 : Specified confliction type has already been set !!
[DEFAULT/Warning] 1 : Specified confliction type has already been set !!
[DEFAULT/Warning] 2 : Specified confliction type has already been set !!
[DEFAULT/Warning] 3 : Specified confliction type has already been set !!
[DEFAULT/Warning] 4 : Specified confliction type has already been set !!
[DEFAULT/Warning] 5 : Specified confliction type has already been set !!
Create WebBrowser
[TCFactory::GetOption] option = 52 value = 1
[static MutexSafeCreator* MutexSafeCreator::GetInstance():50] MutexSafeCreator Success...
[DevMgr/Fatal] 6 : [Get:289] Device Manager START...
	[virtual DevicePollingFLASH::~DevicePollingFLASH()]
[DevMgr/Fatal] 7 : [t_OnEvent:331] DeviceManager::MESSAGE_FLASH_INFO_UPDATED : DeviceKEY(1), DeviceID(0)
[DevMgr/Fatal] 8 : [Subscribe:501] Subscriber : hid-dm-entry [0x61eb5e0]   Event : 25112

BdsHdmiSetSPDInfoframe - vender_name:SAMSUNG, descryption:BD-E6500, BD Wise:00 

[BdsHdmiSetVSInfoframe] : 2D Video Format

Samsung Tv --->bdvd_output_hdmi_set_avmute

SsHdmiSetContentType : 0 
HDMI CONTENT : Type(0),ITC(0),CN(0)  
@@@[ERROR!!!-HDMI] [BdsHdmiDriver.cpp][BdsHdmiSetHDCPEnable][1174] ::	BdsHdmiSetHDCPEnable - End(TRUE) 
B_Osal_TaskSpawnParam:	VCTimerThread01, 48
B_Osal_ProtoTimerCreate - 1 Launched VCTimerThread01 with PID 102731504
---> BDS Video[SetVideoFormat][3529] Resolution : 5 -> 6
[TCFactory::GetOption] unknown option called = 46

[CPharosOSDInfo::Initialize(bool bReverse)] t_nResolution [960]
StartAdd 0x451B, Length 0x0004
Cache Check... Same Write Data
StartAdd 0x4517, Length 0x0004
Cache Check... Same Write Data
StartAdd 0x450B, Length 0x0004
Cache Check... Same Write Data
StartAdd 0x4507, Length 0x0004
Cache Check... Same Write Data
[NetworkManager::GetInstance|93] NetworkManagerMutex Creation
SsHdmiHdcpAuthWatchdogTimeOutEvent: Wait for HDCP Auth Time out 0/16 
[NetworkManager] Default Network Active Type is : WIRED 
[NET_MW/Fatal] 9 : [Create][line:248] [NetworkManager::Create] ==> Begin
NetworkDHCPMonitor::GetInstance() 
[NET_MW/Fatal] 10 : [Create][line:282] [NetworkManager::Create]==> End
[NET_MW/Fatal] 11 : [GetInstance][line:126] NetworkManager Creation
[DevMgr/Fatal] 12 : [Subscribe:501] Subscriber : Pharos Agent [0x61f8ad0]   Event : 25112

CFront t_Create : Create
DBG_MSG /home1/ym2.jang/BRCM7641_Release/PHAROS/PP_App/Setup/InitialSettings/PharosInitialSettingsApp.cpp PharosInitialSettingsApp() (47) :

DBG_MSG /home1/ym2.jang/BRCM7641_Release/PHAROS/PP_App/Setup/InitialSettings/PharosInitialSettingsApp.cpp t_Create() (75) :

HDMI Number is 2 
CBDPlayerApp::t_Create
CDvdPlayerApp::t_Create Called
[CALL][CCddaPlayerApp::CCddaPlayerApp():60] ... 

[CALL][virtual bool CCddaPlayerApp::t_Create():129] ... 

CCddaPlayerApp::t_Create Called
[CALL][CVcdPlayerApp::CVcdPlayerApp():47] ... 

[CALL][virtual bool CVcdPlayerApp::t_Create():75] ... 

[CALL][virtual bool CBDPTestModeApp::t_Create():127] ... 

[DevMgr/Fatal] 13 : [Subscribe:501] Subscriber : BDP Test Mode [0x6223d40]   Event : 25112

[DevMgr/Fatal] 14 : [Subscribe:501] Subscriber : Home Menu [0x62273e8]   Event : 25137

[DevMgr/Fatal] 15 : [Subscribe:501] Subscriber : Home Menu [0x62273e8]   Event : 25138

[DevMgr/Fatal] 16 : [Subscribe:501] Subscriber : Home Menu [0x62273e8]   Event : 25116

[DevMgr/Fatal] 17 : [Subscribe:501] Subscriber : Home Menu [0x62273e8]   Event : 25106

DBG_MSG /home1/ym2.jang/BRCM7641_Release/PHAROS/PP_App/Setup/BdpTools/BDP_ToolsApp.cpp t_Create() (93) :

[TCFactory::GetOption] unknown option called = 46
[DevMgr/Fatal] 18 : [Subscribe:501] Subscriber : BDP Setup View [0x622e230]   Event : 25104

[DevMgr/Fatal] 19 : [Subscribe:501] Subscriber : BDP Setup View [0x622e230]   Event : 25105

CBdGlobalPopupApp::t_Create,  Called.
CPharosGlobalPopupApp::t_Create
[TCFactory::GetOption] unknown option called = 46
@@@ Elapsed time (    4.356) - [BDMWI_PrintEvaluateTime] 	 g_pTaskManager->Create 
@@@ Elapsed time (    4.356) - [BDMWI_PrintEvaluateTime] 	 Wait for PharosAgent Creation 
@@@ Elapsed time (    4.356) - [HostMgr_PrintEvaluateTime] PharosAgent_InitializeApplications 
[CThreadWorker::t_Main] Start Work
HDMI Output: HDMI Mode, HDCP:On, 1080p, Color: 36-bit, Itu_R_BT_709
### Version 20110106 - HDCPlib keyloader for all 40nm platforms (7422/7425/7344/7346/7358/7231
@@@[ERROR!!!-HDMI] [SsHdmiHal.cpp][SsHdmiMain][448] ::	SsHdmiMain: HDMIE_MSG_HDMI_CABLE_IN 
---> BDS Gfx[SetGfxLayerSize][4427] w : 1920 , h : 1080
@@@ Elapsed time (    4.470) - [HostMgr_PrintEvaluateTime] HostMgr_StartSysOperation 
@@@[ERROR!!!-HDMI] [SsHdmiHal.cpp][SsHdmiConnectCable][850] ::	Physical Address : 2.0.0.0 
SsHdmiMain - HDMIE_MSG_HDMI_HDCP_SUCCESS 
B_Osal_ProtoTimerDelete - Deleting timer 1
@@@[AUDIO] [BdsAudioDriver.cpp][AudioDriver_SetDigitalAudioOutputSPDIF][1584]	AudioDriver_SetDigitalAudioOutputSPDIF SAME OUTPUT MODE [4]
[HostMgr_HDMIHotplugFunc] HDMI hot plugged event received 
@@@[ERROR!!!-AUDIO] [BdsAudioDriver.cpp][AudioDriver_GetAudioSubCodec][3271] ::	NOT YET INITIALIZED...
@@@[ERROR!!!-AUDIO] [SsAudio.cpp][AudioDrv_GetAudioSubCodec][1639] ::	AudioDrv_GetAudioSubCodec Error result = -1
[A_APPMW/Fatal] 20 : [CAppUtil::CheckResetAfterPnpOTN]
[A_APPMW/Fatal] 21 : [CAppUtil::CheckResetAfterPnpOTN] PnPcheck File doesn't exist
@@@ Elapsed time (    5.071) - [BDMWI_PrintEvaluateTime] PharosAgent_ActivateHome 1 

## RunApp [CallThread=0x2b03e590] App (105) runs App(Home Menu:34), nRunData(0x0), nRunOption(0x0) ##

[DEFAULT/Debugging] 22 : CApp::SendEvent Event Receiver NULL-app[174]
[DEFAULT/Debugging] 23 : CApp::SendEvent Event Receiver NULL-app[174]
@@@ Elapsed time (    5.085) - [BDMWI_PrintEvaluateTime] [CHomeMenuApp]t_OnEndActivating
 
CHomeMenuApp::t_ActivateHomeApp
[GetMedia ] pURI = file://LOCAL:64
@@@ Elapsed time (    5.085) - [BDMWI_PrintEvaluateTime] [CHomeMenuApp]t_CreateMainWnd 
 
[NET_MW/Fatal] 24 : [GetInstance][line:143] Already created...
[AP_NET_SETUP/Fatal] 25 : [void CreateNetworkManager()][line:94] LoadWiredModule Done
[SSL_library_init] Initializing...
[SSL_library_init] already intialized...
[AP_NET_SETUP/Fatal] 26 : [void CreateNetworkManager()][line:97] COpenSSLInitializer Done
[AP_NET_SETUP/Fatal] 27 : [void CreateNetworkManager()][line:102]  [ StartDeviceMonitoring ] 
[TCFactory::GetOption] unknown option called = 46
[DevMgr/Fatal] 28 : [Subscribe:501] Subscriber : Network Setup [0x69edf070]   Event : 25112

[DEFAULT/Debugging] 29 : CApp::SendEvent Event Receiver NULL-app[3]
[TCFactory::GetOption] unknown option called = 46
[AP_INFOLINK/Fatal] 30 : CNNaviAppBase::t_Create()
[TCFactory::GetOption] unknown option called = 46
[AP_INFOLINK/Fatal] 31 : CNNaviLoadingBase::Create()
(*) Direct/Interface: Loaded 'NEXUS' implementation of 'IDirectFBImageProvider'.
(*) Direct/Interface: Loaded 'PNG' implementation of 'IDirectFBImageProvider'.
[TCScreen::GetOption] option = 21
[AP_INFOLINK/Fatal] 32 : CNNaviLoadingBase::Create()OSD_RESOLUTION_960X540
@@@[ERROR!!!-HDMI] [BdsHdmiDriver.cpp][BdsHdmiBksvListUpdate][2266] ::	BdsHdmiBksvListUpdate - There is no HDCP repeater 
@@@[ERROR!!!-HDMI] [BdsHdmiDriver.cpp][BdsHdmiBksvListUpdate][2297] ::	BdsHdmiBksvListUpdate - TEST:No need to write on same data_1 
@@@[ERROR!!!-HDMI] [BdsHdmiDriver.cpp][BdsHdmiLoadHdmiInfo][2028] ::	file open error
@@@[ERROR!!!-HDMI] [BdsHdmiDriver.cpp][BdsHdmiSystemRenewabilityManagement][2350] ::	BdsHdmiSystemRenewabilityManagement -Return:SRM count(0) or KSVList count(1) is invalid 
@@@[ERROR!!!-HDMI] [SsHdmiHal.cpp][SsHdmiMain][343] ::	HDCP Succeeded
@@@[ERROR!!!-HDMI] [SsHdmiHal.cpp][SsHdmiMain][351] ::	SsHdmiMain @ 351: Changing state to ENCRYPTED
@@@ Elapsed time (    5.850) - [BDMWI_PrintEvaluateTime] [CHomeMenuApp] CHomeMenuMainWndNeo::Show <Start> 
 
@@@ Elapsed time (    5.997) - [BDMWI_PrintEvaluateTime] [CHomeMenuApp] CHomeMenuMainWndNeo::Show <BG Image Created!> 
 
@@@ Elapsed time (    6.002) - [BDMWI_PrintEvaluateTime] [CHomeMenuApp] CHomeMenuMainWndNeo::Show <BG Object Created! 1> 
 
@@@ Elapsed time (    6.020) - [BDMWI_PrintEvaluateTime] [CHomeMenuApp] CHomeMenuMainWndNeo::Show <BG Object Created! 2> 
 
@@@ Elapsed time (    6.031) - [BDMWI_PrintEvaluateTime] [CHomeMenuApp] CHomeMenuMainWndNeo::Show <ParentType Shown !> 
 
[AP_INFOLINK/Fatal] 33 : END CNNaviLoadingBase::Create()
[AP_INFOLINK/Fatal] 34 : CNNaviMsg::Create()
BrowserConnector::InitBrowserManagerServer()
BrowserConnector >> Initialize Server!![NET_MW/Fatal] 35 : [AddConnection][line:499] [eth0]
[NET_MW/Fatal] 36 : [GetNetworkInfo][line:334] file path = /mtd_rwarea/network_Wired_info not found. Initialize the info file.... 

[NET_MW/Fatal] 37 : [GetDNSMode][line:875] file path = /mtd_rwarea/network_Wired_info not found. Initialize the info file.... 

NetworkDHCPMonitor::GetInstance() 
Already created...
[NET_MW/Fatal] 38 : [StopMonitoring][line:394] NetworkStatusMonitor[   11.342000] eth0 cable plugged in, powering up
::StopMonitoring
=> Auto : ifconfig eth0 up
[NET_SS/Fatal] 39 : [SetDNS][line:2116] /mtd_rwarea/resolv.conf: [nameserver 0.0.0.0
options timeout:3 attempts:1
]
[AP_INFOLINK/Fatal] 40 : filename is = [libXserver.so]
[NET_MW/Fatal] 41 : [StartMonitoring][line:413] NetworkStatusMonitor::StartMonitoring
[NET_MW/Fatal] 42 : [AddConnection][line:550] Finished
@@@ Elapsed time (    6.979) - [BDMWI_PrintEvaluateTime] [CHomeMenuApp] CHomeMenuMainWndNeo::Show <t_pList Shown!> 
 
[DEFAULT/Debugging] 43 : CApp::SendEvent Event Receiver NULL-app[174]
[DEFAULT/Debugging] 44 : CApp::SendEvent Event Receiver NULL-app[174]
[DEFAULT/Debugging] 45 : CApp::SendEvent Event Receiver NULL-app[174]
@@@ Elapsed time (    6.987) - [BDMWI_PrintEvaluateTime] PharosAgent_ActivateHome 2 
@@@ Elapsed time (    6.987) - [HostMgr_PrintEvaluateTime] PHAROSAGENTE_OSD_LOGO_ON 
@@@ Elapsed time (    6.987) - [HostMgr_PrintEvaluateTime] HostMgr_USBCheck       
enabling realtime scheduling
Osal_TaskSpawnParam:	host_task, 32
@@@ Elapsed time (    6.988) - [HostMgr_PrintEvaluateTime] Osal_TaskSpawnParam HostManager 
APP_INITIALIZE(); end

###################################
BEFORE POWER OFF SEM !!!! 
###################################
@@@ Elapsed time (    6.993) - [HostMgr_PrintEvaluateTime] End HostMgr_Initialize 
[CDiscManager::Reset] Called
OsalFs_Umount : UMount Fail! errno(22) -> Invalid argument Invalid argument : /mnt/bdd
	[/home1/ym2.jang/BRCM7641_Release/PHAROS/PP_MW/Src/Osal/Linux/Osal_Fs.cpp:221]
OsalFs_Umount : UMount Fail! errno(22) -> Invalid argument Invalid argument : /mnt/cdrom
	[/home1/ym2.jang/BRCM7641_Release/PHAROS/PP_MW/Src/Osal/Linux/Osal_Fs.cpp:221]
[StorageNav_DiscDetectNotify] msgType = 1
[StorageNav_DiscDetectNotify] physicalType = 0
[StorageNav_DiscDetectNotify] logicalType = 0x0
[StorageNav_DiscDetectNotify] mountFlag = 0
[StorageNav_DiscDetectNotify] mountPathName = 
[StorageNav_DiscDetectNotify] mediaName = NO DISC
[CDiscManager::StartDetection] Called
CTrayMonitor::StartChecking] Called
@@@ Elapsed time (    7.012) - Before Call SystemMW_GetFastOpenStatus()
          

MsQbuffer[0]=0, MsQbuffer[1]=f5. 
 Fast Open state : 0,  RetryCount : 0 
@@@ Elapsed time (    7.043) - After Call SystemMW_GetFastOpenStatus()
           
@@@ Elapsed time (    7.043) - Before Call SystemMW_GetPowerOnAutoPlayStatus()
   

MsQbuffer[0]=2b, MsQbuffer[1]=0. 
[t_TrayStatusChangeHandler] called : Status = 0
@@@ Elapsed time (    7.074) - After Call SystemMW_GetPowerOnAutoPlayStatus()
    
[CPharosAgent::t_CheckPowerOnAutoPlayback] isPowerOnAutoPlay = 0@@@ Elapsed time (    7.075) - [CHiddenMonitor::t_Reset]                          
[CHiddenMonitor::t_Reset] key = called
@@@[AUDIO] [AudioHal_Interface.cpp][AudioHal_RegisterAwmEventCallback][1539]	IN
@@@[AUDIO] [SsAudioWatermarkManager.cpp][SsAWM_InstallAwmEventCallback][123]	Install the AWM Event Callback.. 0xf533d0 
@@@[AUDIO] [AudioHal_Interface.cpp][AudioHal_RegisterAwmEventCallback][1541]	OUT

MsQbuffer[0]=0, MsQbuffer[1]=f5. 
[CPharosAppUtil::StartDefaultScreenSaver] Called
[CPharosAppUtil::StartDefaultScreenSaver] Start...(Task = 0x6224380)
[CPharosAppUtil::StartDefaultScreenSaver] UpdateStartInterval...
 Fast Open state : 0,  RetryCount : 0 
[DISCINFO_MANAGER/Fatal] 46 : CDiscInfoManager::GetInstance Create

t_OnEvent : FrontEvent -> MESSAGE_FD_DISC_LOAD
[CPharosAgent::t_ProcessAfterLoading] Not auto playback on power on@@@ Elapsed time (    7.115) - [BDMWI_PrintEvaluateTime] No Disc Detected         
[PharosAgent::SetIgnoreLoading] Called to (0)
t_OnEvent : FrontEvent -> MESSAGE_FD_DISC_NODISC
t_OnEvent : FrontEvent -> MESSAGE_FD_PLAYBACK_STOP Param = 0 
[t_SendDeckStatus] Pre status : 7, New status : 6 
Inside XorgMain

Initializing Xserver......
START   KdProcessArgument       kdrive.c

ShadowWindow Proxy initialized successfully ...

************ SGFXGetScreen returned 0; video_buffer 0x6124da40 gp_SysFrameBufferPtr 0x6b90c008 , gp_plane_width 1920, gp_plane_height 1080, gp_plane_pitch 7680 *********
START   fbdevScreenInitialize      fbdev.c

EXA is OFF - Hardware Acceleration is not enabled

 GFX_XInput Log : (LinuxKeyboardInit) Succeded to create Gfx_XInput event listener thread 
[AP_INFOLINK/Fatal] 47 : [CNNaviAppBase::t_Create(1036)] InitXServer success.
[TCFactory::GetOption] unknown option called = 46
[TCTv::GetTimeZone], offset[60] regionId[0]
[AP_FULLBROWSER/Fatal] 48 : Use rocommon Browser Font.conf

[AP_FULLBROWSER/Fatal] 49 : Excute rocommon Browser.
[AP_FULLBROWSER/Fatal] 50 : Launcher path = /mtd_rocommon/WebBrowser/bin/BrowserLauncher
[AP_FULLBROWSER/Fatal] 51 : Url = UI_URL=file:///mtd_rocommon/WebBrowser/WebkitUI/Index.html
[AP_FULLBROWSER/Fatal] 52 : Mime = XDG_DATA_HOME=/mtd_rocommon/WebBrowser/.local/share/
[AP_FULLBROWSER/Fatal] 53 : Plugins = MOZ_PLUGIN_PATH=/mtd_down/emps/empBrowserCommonPlugin/plugins:/mtd_down/emps/empWebBrowser/plugins:/mtd_rocommon/WebBrowser/plugins/:/mtd_rocommon/WebBrowser/plugins:/mtd_rocommon/Webkit/Plugins/Common
[AP_FULLBROWSER/Fatal] 54 : Font config = FONTCONFIG_FILE=/mtd_rocommon/WebBrowser/fonts/fonts.conf
[AP_FULLBROWSER/Fatal] 55 : Country = US
[AP_FULLBROWSER/Fatal] 56 : PreLoading = 0
[AP_FULLBROWSER/Fatal] 57 : Max Tab : 2, Max Memory : 160, Max Flash : 7
[AP_FULLBROWSER/Fatal] 58 : GetPhysicalResolution [1920 1080]

[TCFactory::GetOption] unknown option called = 46
[TCFactory::GetOption] option = 65 value = 2
[(null)/Fatal] 59 : 	=== virtual bool CMMPlayApp::t_Create()-(1202) --- 

[MMDOC/Fatal] 60 : static ECMLocaleSet CMMDocConfig::GetLocaleSet() [Line349] get from pms is 1

[MMDOC/Fatal] 61 : static ECMLocaleSet CMMDocConfig::GetLocaleSet() [Line403] GetLocaleSet 0

[MMPLAYER/Fatal] 62 : 	=== virtual bool CMMPlayApp::t_OnEvent(const PTEvent*)-(1312) --- MMP_APP_EVENT_START_ONTIMER 

[MMPLAYER/Fatal] 63 : 	=== bootReason is not BOOT_REASON_ONTIME!! (-1) 

[MMDOC/Fatal] 64 : static ECMLocaleSet CMMDocConfig::GetLocaleSet() [Line349] get from pms is 1

[MMDOC/Fatal] 65 : static ECMLocaleSet CMMDocConfig::GetLocaleSet() [Line403] GetLocaleSet 0

[GetMedia ] pURI = file://LOCAL:64
[TCFactory::GetOption] unknown option called = 46

[virtual void CCecMessageTxRx::t_Main()] t_ReceiveCECMsg1 :  0xe4  0x0  0xa0  0x20  0x0  0x64 

[void CCecMessageTxRx::t_SendMessageToMicom()] t_SendCECMsg1 : 0x42 0x0 0x1 0x8d 0x0 0x0

[void CCecMessageTxRx::t_SendMessageToMicom()] t_SendCECMsg1 : 0x4b 0x9 0x4 0x42 0x44 0x20

[void CCecMessageTxRx::t_SendMessageToMicom()] t_SendCECMsg1 : 0x44 0x4 0x67 0x65 0x72 0xfe

[void CCecMessageTxRx::t_SendMessageToMicom()] t_SendCECMsg1 : 0x42 0x3 0x0 0x8f 0x72 0xfe

[void CCecMessageTxRx::t_SendMessageToMicom()] t_SendCECMsg1 : 0x43 0x7 0x0 0x80 0xa 0xfe
[void CHdmiCecDeviceProcess::ProcessHdmiConnected(unsigned char, unsigned char)] phyaddrAB: 20, phyaddrCD: 0 
StartAdd 0x43D1, Length 0x0001
Cache Check... Same Write Data
StartAdd 0x43D0, Length 0x0001
Cache Check... Same Write Data

[void CCecMessageTxRx::t_SendMessageToMicom()] t_SendCECMsg1 : 0x44 0x2 0x20 0x0 0x4 0xac

[void CCecMessageTxRx::t_SendMessageToMicom()] t_SendCECMsg1 : 0x41 0x20 0xaf 0x0 0x4 0xac

[void CCecMessageTxRx::t_SendMessageToMicom()] t_SendCECMsg1 : 0x43 0x7 0x0 0x80 0xa 0xac
[DeviceOrganizer/Fatal] 66 : [AddRefCount:115] new AddRefCount called, open Device DB
[DeviceOrganizer/Fatal] 67 : [AddRefCount:121] AddRefCount is 1
[Manager/Fatal] 68 : [Create:111] ContentsManager Create complete!!!:)
[MMDOC/Fatal] 69 : m_RemoveAtList
[MMDOC/Fatal] 70 : bool CMMDocFactory::InitializeDoc(CMMDoc*) [Line354] InitializeDoc, 1 reference

[DBHandler/Fatal] 71 : [Create:110] DBHandler Creation DevID = -1 -> created by None
Check Key prDvCertTem 
[DBHandler/Fatal] 72 : [Create:611] #### Create Database: /mtd_contents/-1
[DBHandler/Fatal] 73 : [m_CheckIntegrity:803] DB Integrity Check is OK
[DBHandler/Fatal] 74 : [m_UseSynchronous:740] Can't get Device Info !!!! DevID = -1
[DBHandler/Fatal] 75 : [Destroy:251] Start Destroy /mtd_contents/-1|-1 None 

[DBHandler/Fatal] 76 : [ReleaseCommandProcessorAndReceiver:120] Reference Count is 0. Delete receiver with key:/mtd_contents/-1|-1
[DBHandler/Fatal] 77 : [Destroy:710] Destroy CCMDBSQLiteReceiver m_bUseDB(1)
[DBHandler/Fatal] 78 : [m_CloseDB:869] SQLite DB is closed
[DBHandler/Fatal] 79 : [ReleaseCollateRuleGetter:304] Release Rule Getter..... Language: 22
[DBHandler/Fatal] 80 : [Destroy:255] End Destroy /mtd_contents/-1|-1 None 

[DBHandler/Fatal] 81 : [~CCMDBCommandProcessor:46] ~CCMDBCommandProcessor Destructor
[DBHandler/Fatal] 82 : [~CCMDBCommandReceiver:44] ~CCMDBCommandReceiver Destructor
[DeviceOrganizer/Fatal] 83 : [AddRefCount:121] AddRefCount is 2
[DBHandler/Fatal] 84 : [Create:110] DBHandler Creation DevID = -1 -> created by None
[DBHandler/Fatal] 85 : [Create:611] #### Create Database: /mtd_contents/-1
[DBHandler/Fatal] 86 : [m_CheckIntegrity:803] DB Integrity Check is OK
[DBHandler/Fatal] 87 : [m_UseSynchronous:740] Can't get Device Info !!!! DevID = -1
Check Key prPriv 
MMMMMMMMMMMMMMMMM Call APi Awake 
Send CEC Wake UP 

#####HDMIE_MSG_HDMI_CEC_WAKEUP####

#####WAKE UP ---> CEC PLUG####
@@@[ERROR!!!-HDMI] [SsHdmiHal.cpp][SsHdmiConnectCable][850] ::	Physical Address : 2.0.0.0 
[DBHandler/Fatal] 88 : [Create:110] DBHandler Creation DevID = -1 -> created by None
[Browser/Fatal] 89 : [m_Create:2213] [CCMBrowserProxy] m_Create is success  m_nBrowserId  = 0
[Browser/Fatal] 90 : [~CCMBrowserProxy:42] [CCMBrowserProxy] destructor is called  m_nBrowserId = 0
[Browser/Fatal] 91 : [m_Destroy:1497] [CCMBrowser] m_Destroy() is called
[DeviceOrganizer/Fatal] 92 : [m_GetDeviceTypeByPartitionKey:1182] pDevice is NULL
[DeviceOrganizer/Fatal] 93 : [GetDeviceId:196] disconnected device id form DB
[DBHandler/Fatal] 94 : [Destroy:251] Start Destroy /mtd_contents/-1|-1 None 

Check Key prbGrCert 
[DBHandler/Fatal] 95 : [Destroy:255] End Destroy /mtd_contents/-1|-1 None 

[DBHandler/Fatal] 96 : [Destroy:251] Start Destroy /mtd_contents/-1|-1 None 

[DBHandler/Fatal] 97 : [ReleaseCommandProcessorAndReceiver:120] Reference Count is 0. Delete receiver with key:/mtd_contents/-1|-1
[DBHandler/Fatal] 98 : [Destroy:710] Destroy CCMDBSQLiteReceiver m_bUseDB(1)
[DBHandler/Fatal] 99 : [m_CloseDB:869] SQLite DB is closed
[DBHandler/Fatal] 100 : [ReleaseCollateRuleGetter:304] Release Rule Getter..... Language: 22
[DBHandler/Fatal] 101 : [Destroy:255] End Destroy /mtd_contents/-1|-1 None 

[DBHandler/Fatal] 102 : [~CCMDBCommandReceiver:44] ~CCMDBCommandReceiver Destructor
[DBHandler/Fatal] 103 : [~CCMDBCommandProcessor:46] ~CCMDBCommandProcessor Destructor
Check Key przGrPri 
[PSA] [CheckPlayreadyKey:832] return value 1 
[AP_PSA_ANALYZER/Fatal] 104 : [checkCPDeveloper] CP Signiture file byteStream read from SS Error [5]

	>>[ERR:ODiSystem.cpp] SetFKPMode():115 #Null Fuction Call !!!Must Check Implementation Code...

[TCFactory::GetOption] unknown option called = 46
[DevMgr/Fatal] 105 : [Subscribe:501] Subscriber : Dev App [0x6505c68]   Event : 25110

[DevMgr/Fatal] 106 : [Subscribe:501] Subscriber : Dev App [0x6505c68]   Event : 25137

[DevMgr/Fatal] 107 : [Subscribe:501] Subscriber : Dev App [0x6505c68]   Event : 25138

[DevMgr/Fatal] 108 : [Subscribe:501] Subscriber : Dev App [0x6505c68]   Event : 25106

[DevMgr/Fatal] 109 : [Subscribe:501] Subscriber : Dev App [0x6505c68]   Event : 25139

[DevMgr/Fatal] 110 : [Subscribe:501] Subscriber : Dev App [0x6505c68]   Event : 25104


[virtual void CCecMessageTxRx::t_Main()] t_ReceiveCECMsg1 :  0x63  0x0  0x20  0x4  0xab 
[void CHdmiCecDeviceProcess::ProcessSystemCommand(SystemCommandRespond*, unsigned char)] SYS_CMD_OPCODE_GET_LOGICAL_ADDRESS -- pMsg->m_operand[0]: 4, pMsg->m_operand[1]: 48 
[(null)/Fatal] 111 : PfmSystemInfo.cpp:286>/mtd_rwarea/UPGRADE_FLAG is already exist
[(null)/Fatal] 112 : PfmSystemInfo.cpp:342>cannot delete SWU_EMPTY_0 !!!
[(null)/Fatal] 113 : PfmSystemInfo.cpp:360>cannot delete SWU_EMPTY_1 !!!
[TCFactory::GetOption] option = 118 value = 0
##### SystemHal_GetBootPartition stateData[0] : 1
##### SystemHal_GetBootPartition : 0
##### SystemHal_GetBootPartition stateData[0] : 1
##### SystemHal_GetBootPartition : 0
[AP_SWU_CORE_APP/Fatal] 114 : SWUApp.cpp:263>t_Create complete- 0,0
[AP_SWU_CORE_SM/Fatal] 115 : PfmSystemInfo.cpp:895>Check standby power on proc call flag - Flag(0)

[void CCecMessageTxRx::t_SendMessageToMicom()] t_SendCECMsg1 : 0x2 0x40 0x91 0x1d 0xa 0xac

[void CCecMessageTxRx::t_SendMessageToMicom()] t_SendCECMsg1 : 0x5 0x4f 0x87 0x0 0x0 0xf0

[void CCecMessageTxRx::t_SendMessageToMicom()] t_SendCECMsg1 : 0x2 0x40 0x8c 0x0 0x0 0xf0

[void CCecMessageTxRx::t_SendMessageToMicom()] t_SendCECMsg1 : 0x2 0x40 0x4 0x88 0x0 0xf0
[TCFactory::GetOption] unknown option called = 46
[DevMgr/Fatal] 116 : [Subscribe:501] Subscriber : SWUUIApp [0x658a6a0]   Event : 25131

[DevMgr/Fatal] 117 : [Subscribe:501] Subscriber : SWUUIApp [0x658a6a0]   Event : 25104

[DevMgr/Fatal] 118 : [Subscribe:501] Subscriber : SWUUIApp [0x658a6a0]   Event : 25129

[TCFactory::GetOption] option = 52 value = 1
[TCFactory::GetOption] option = 52 value = 1
[TCFactory::GetOption] option = 52 value = 1
[TCFactory::GetOption] option = 52 value = 1
[TCFactory::GetOption] option = 52 value = 1
[TCFactory::GetOption] option = 52 value = 1
[   14.034000] eth0 cable unplugged, powering down
[Common/Fatal] 119 : [Destroy:130] #### Bookmark Manager is closed
[DeviceOrganizer/Fatal] 120 : [ReduceRefCount:152] ReduceRefCount is 1
[Browser/Fatal] 121 : [~CCMBrowser:50] ~CCMBrowser is destroyed:
Mutex Create Successful
Mutex Create Successful
[TCFactory::GetOption] unknown option called = 46
mkdir: cannot create directory `/mtd_rwarea/dlna_web_root/': File exists
mkdir: cannot create directory `/mtd_rwarea/dlna_web_root//SMPConfig': File exists
bool checkFilesState(const char*) XML files are good
[AccessControlInfo:ACLAddDevNameFilterRule] b_include :0 , PATTERN SEC_HHP_ , reject_chars  /

 
[TCFactory::GetOption] unknown option called = 46
[AP_DUALTV_APP/Fatal] 165 : [MainTVUPnPServer] [LoadACLFromACLManager Line:432] RemoteWrapper::ACManagerGetAllEntries() Failed.
[AccessControlInfo:ACLAddDevNameFilterRule] b_include :0 , PATTERN SEC_HHP_ , reject_chars  /

 
[DevMgr/Fatal] 166 : [LoadUSBModules:514] ...
[DevMgr/Fatal] 167 : [t_OnEvent:421] DeviceManagerImpl::MESSAGE_IMPL_LOAD_USB_MODULES
[DevMgr/Fatal] 168 : [ExecuteCommand:654] COMMAND_IMPL_LOAD_USB_MODULES...(0)
[CPharosAgent::t_SendSystemTimeSetEvent] (t_AppInitializedDone= 1)
[CPharosAgent::t_SendSystemTimeSetEvent] (t_bNTPTimeSetDone= 0)
[CPharosAgent::t_SendSystemTimeSetEvent] (t_bTimeDoneEventSent = 0)
[PharosAgent_CompleteKeyEvent] Call SystemMW_ApplicationInitializeDone() .... 
@@@ Elapsed time (   12.783) - [BDMWI_PrintEvaluateTime] 	 Wait CompleteKeyEventReady 
[CThreadWorker::t_Main] End Work
[DevMgr/Fatal] 169 : [Get:43] DeadlockProber Success...
[LoadUSBModules:1209] Start...
[TCFactory::GetOption] unknown option called = 46
	insmod usbcore...
[AccessControlInfo:ACLAddDevNameFilterRule] b_include :0 , PATTERN SEC_HHP_ , reject_chars  /

 
@@@[AUDIO] [AudioHal_Interface.cpp][AudioHal_GetVolumeMute][1014]	[32m Not Supported API BUT VOLUME IS NOT MUTE STATE [0m
@@@[ERROR!!!-AUDIO] [AudioHal_Interface.cpp][AudioHal_GetVolumeDevice][998] ::	[32m Not Supported API [0m
Unused AudioHal_VolumeDevice Vaule(729898304)
	insmod ehci_hcd...
	insmod ohci_hcd...
	insmod usb_storage...
USB : Exit Load USB module... Elapsed Time:550msec.
	usb_storage found...
	ohci_hcd found...
	ehci_hcd found...
	usbcore found...
[GetNetworkSupportType] 2311 :::::::::::::::::::::::::::: 
[GetNetworkSupportType] 2317 NETWORK_SUPPORT_WIFI_INT 
[GetNetworkSupportType] 2311 :::::::::::::::::::::::::::: 
[GetNetworkSupportType] 2317 NETWORK_SUPPORT_WIFI_INT 
[DevMgr/Fatal] 170 : [InitiateAllDevices:738] All devices are initiated!!!
[DevMgr/Fatal] 171 : [ExecuteCommand:843] Case(9) Done... Elapsed Time:600msec.
[DevMgr/Fatal] 172 : [t_OnEvent:331] DeviceManager::MESSAGE_FLASH_INFO_UPDATED : DeviceKEY(1), DeviceID(0)
[DevMgr/Fatal] 173 : [t_OnEvent:232] DeviceManager::MESSAGE_USB_INSMOD_COMPLETE : (15)
[CBDTestModeApp::t_OnEvent] DeviceManager::MESSAGE_USB_INSMOD_COMPLETE received
[AP_NET_SETUP/Fatal] 174 : [virtual bool CNetworkAppBase::t_OnEvent(const PTEvent*)][line:1136] LoadWiredModule Done
[GetNetworkSupportType] 2311 :::::::::::::::::::::::::::: 
[GetNetworkSupportType] 2317 NETWORK_SUPPORT_WIFI_INT 
[NET_SS/Fatal] 175 : [LoadWirelessModule][line:2908] NETWORK TYPE : NETWORK_SUPPORT_WIFI_INT
[NET_SS/Fatal] 176 : [LoadWirelessModule][line:2923] ##### WIFI MODULE - BD CASE - INTERNAL TYPE (BCM) #####
[DevMgr/Fatal] 177 : [Subscribe:501] Subscriber : Pharos Agent [0x61f8ad0]   Event : 25104

[DevMgr/Fatal] 178 : [Subscribe:501] Subscriber : Pharos Agent [0x61f8ad0]   Event : 25105

[NET_SS/Fatal] 179 : [LoadWirelessModule][line:2940] insmod dhd.ko ...
[NET_SS/Fatal] 180 : [LoadWirelessModule][line:2941] ####### BCM43234B #######
[NET_SS/Fatal] 181 : [LoadWirelessModule][line:2945] insmod dhd.ko - Done !!
[NET_MW/Fatal] 182 : [AddConnection][line:499] [bcm0]
[WIFI_SS/Fatal] 183 : [CreateWIFIDevice][line:38] 
[WIFI_SS/Fatal] 184 : [WIFIDeviceBroadcom][line:112] bcm0
[WIFI_SS/Fatal] 185 : [WIFIDeviceBroadcom][line:123] Device Name : bcm0, Device Name Length : 5
GetWifiRegion : 18
[WIFI_SS/Fatal] 186 : [WIFIDeviceBroadcom][line:159] REGION INFO IS PROPER : Factory WiFi Region Value is WIFI_REGION_S
[WIFI_SS/Fatal] 187 : [WIFIDeviceBroadcom][line:160] TRYING TO SET COUNTRY REGION : 18
P2P Handle is NULL
[NET_MW/Fatal] 188 : [Create][line:219] P2P Initializing
[WIFI_SS/Fatal] 189 : [P2PInitialize][line:2504] 
Current PHY Name : bcm0 
[WIFI_SS/Fatal] 190 : [P2PIsGroupOwner][line:2789] 
[WIFI_SS/Fatal] 191 : [P2PSetGroupOwnerAttr][line:2771] 
[WIFI_SS/Fatal] 192 : [p2papp_get_link_config][line:2049] --> Passphrase        : 62181190

[WIFI_SS/Fatal] 193 : [p2papp_get_link_config][line:2066] --> PIN               : 38496325

open fail(OpenUART)!!
[31mBDFANet_Init OpenUART is NG!![0m
[WIFI_SS/Fatal] 194 : [P2PSetDeviceFoundEventCallback][line:3324] 
[WIFI_SS/Fatal] 195 : [P2PSetConnectResultEventCallback][line:3358] 
[WIFI_SS/Fatal] 196 : [P2PSetNegIncomingEventCallback][line:3376] 
[WIFI_SS/Fatal] 197 : [P2PSetStatusNotificationEventCallback][line:3341] 
[WIFI_SS/Fatal] 198 : [P2PStartRecieveEvent][line:3290] 
[NET_MW/Fatal] 199 : [t_InitializeP2P][line:4232] P2PInitializing Completed
[NET_MW/Fatal] 200 : [GetNetworkInfo][line:334] file path = /mtd_rwarea/network_Wireless_info not found. Initialize the info file.... 

[NET_MW/Fatal] 201 : [GetDNSMode][line:875] file path = /mtd_rwarea/network_Wireless_info not found. Initialize the info file.... 

[GetNetworkSupportType] 2311 :::::::::::::::::::::::::::: 
[GetNetworkSupportType] 2317 NETWORK_SUPPORT_WIFI_INT 
[NET_MW/Fatal] 202 : [GetInstance][line:143] Already created...
[AP_NET_SETUP/Fatal] 203 : [void CNetworkAppBase::t_CheckForBootingConnection()][line:2358] NETWORK_TYPE_WIRELESS Activated by BOOTING
[NET_MW/Fatal] 204 : [AddConnection][line:550] Finished
[NET_MW/Fatal] 205 : [SetActiveType][line:404] Deactivate(0)
NetworkDHCPMonitor::GetInstance() 
Already created...
[NET_SS/Fatal] 206 : [DeactivateDHCP][line:822] ##########DeactivateDHCP [eth0] ##############
 
[NET_SS/Fatal] 207 : [LinkDown][line:705] ifconfig eth0 down
=> Auto : ifconfig eth0 up
[   21.979000] eth0 cable plugged in, powering up
[NET_SS/Fatal] 208 : [SetDNS][line:2116] /mtd_rwarea/resolv.conf: [nameserver 0.0.0.0
options timeout:3 attempts:1
]
[NET_MW/Fatal] 209 : [SetActiveType][line:410] Activate
[NET_MW/Fatal] 210 : [Activate][line:418] Activate WirelessConnection
[NET_MW/Fatal] 211 : [Activate][line:423] WirelessConnection::WIRELESS_COMMAND_ACTIVATE
[AP_NET_SETUP/Fatal] 212 : [void CNetworkAppBase::t_CheckForBootingConnection()][line:2361]  NETWORK_TYPE_WIRELESS [[[ SUCCESS ]]] 
[DEFAULT/Debugging] 213 : CApp::SendEvent Event Receiver NULL-app[3]
NetworkDHCPMonitor::GetInstance() 
Already created...
[NET_MW/Fatal] 214 : [t_Activate][line:840] ####### WirelessCommand::t_Activate [ DevName : bcm0 ] #######
[NET_MW/Fatal] 215 : [StopMonitoring][line:394] NetworkStatusMonitor::StopMonitoring
[NET_MW/Fatal] 216 : [t_Activate][line:846] Current Soft AP Status(1), Current Wireless Mode(1)
[WIFI_SS/Fatal] 217 : [UpInf][line:313] LINK UP - Interface Name : bcm0
[NET_SS/Fatal] 218 : [SetDNS][line:2116] /mtd_rwarea/resolv.conf: [nameserver 0.0.0.0
options timeout:3 attempts:1
]
[WIFI_SS/Fatal] 219 : [Connect][line:700] [Station Mode] Connect is OK ~!!!!
[WIFI_SS/Fatal] 220 : [GetInterfaceName][line:287] Device Name is NULL(Interface num : 1)
[NET_MW/Fatal] 221 : [StartMonitoring][line:413] NetworkStatusMonitor::StartMonitoring
[NET_SS/Fatal] 222 : [ActivateDHCP][line:770] udhcpc -i bcm0 -t 5 -T 5 -b&
udhcpc (v1.18.5) started
[   24.668000] eth0 cable unplugged, powering down
Sending discover...
Sending select for 192.168.178.20...
Lease of 192.168.178.20 obtained, lease time 864000
deleting routers
SIOCDELRT: No such process
adding dns 192.168.178.1
DEVICE =  bcm
DEVICE =  bcm0
DEVICE =  bcm0
DEVICE =  bcm0
DEVICE =  bcm0
[DEFAULT/Debugging] 223 : CApp::SendEvent Event Receiver NULL-app[71]
DCM:ServiceURL [/MediaServerContentDirectory.xml] Service is Received...
DCM:ServiceURL [/MediaServerContentDirectory.xml] Service is Received...
DCM:ServiceURL [/MediaServerConnectionManager.xml] Service is Received...
DCM:ServiceURL [/MediaServerConnectionManager.xml] Service is Received...
DCM:ServiceURL [/MediaReceiverRegistrar.xml] Service is Received...
DCM:ServiceURL [/MediaReceiverRegistrar.xml] Service is Received...
DCM:ServiceURL [/ServerStatus.xml] Service is Received...
DCM:ServiceURL [/ServerStatus.xml] Service is Received...
[MMDevice/Fatal] 224 : [ CDevListMgr/AddDevice(176) ] DevKey:31, DevType:7, FS:0, DevPath:, MntPath:

[DevMgr/Fatal] 225 : [t_OnEvent:246] DeviceManager::MESSAGE_DLNA_CONNECTED : DeviceKEY(2), DeviceID(0)

	>>[ERR:TDiSystem.cpp] GetUsbMediaMode():253 Null Fuction Call !!!Must Check Implementation Code...

[NET_MW/Fatal] 226 : [t_Main][line:274] Wireless PHY Connected
[SUNNAM] UEP main is started
[NET_MW/Fatal] 227 : [t_Main][line:300] Gateway Connected
[MapApp/Fatal] 228 : virtual bool CMapApp::t_OnEvent(const PTEvent*) [Line736] ++++++++++++++++++EVENT_NET_STATUS_GATEWAY_CONNECTED++++++++++++++++++

[NET_MW/Fatal] 229 : [t_Main][line:328] DNS Succesful
[NET_MW/Fatal] 230 : [t_Main][line:348] HTTP Succesful
CPharosAgent::t_SetNTPTime] Called (t_bNTPTimeSetDone= 0)
CPharosAgent::t_SetNTPTime] Before Call PSA NTP related function
[PSA] getTime by http
[PSA] getTime success
CPharosAgent::t_SetNTPTime] pClock->getTime result (iRet= 0)
[CPharosAgent::t_SendSystemTimeSetEvent] (t_AppInitializedDone= 1)
[CPharosAgent::t_SendSystemTimeSetEvent] (t_bNTPTimeSetDone= 1)
[CPharosAgent::t_SendSystemTimeSetEvent] (t_bTimeDoneEventSent = 0)
CPharosAgent::t_SendSystemTimeSetEvent] Send MESSAGE_PHAROS_SET_SYSTEM_TIME_DONE
CPharosAgent::t_SendSystemTimeSetEvent] Set t_bTimeDoneEventSent = 1
CPharosAgent::t_SetNTPTime] End 
[AP_PSA_ANALYZER/Fatal] 231 : [0] ANALYZER GetStartFlagState
[AP_PSASMLU/Fatal] 232 : [CSMLUCCore] [t_SettingHubSiteInfo] [557] ***************************************************** 
[AP_PSASMLU/Fatal] 234 : [CSMLUCCore] [t_SettingHubSiteInfo] [558] **** Infomation for connecting with hub-site **** 
[AP_PSASMLU/Fatal] 235 : [CSMLUCCore] [t_SettingHubSiteInfo] [559] ***************************************************** 
[AP_PSASMLU/Fatal] 236 : [CSMLUCCore] [t_SettingHubSiteInfo] [561]  TVID [ EXCL6KHUDASYO ] 
[AP_PSASMLU/Fatal] 237 : [CSMLUCCore] [t_SettingHubSiteInfo] [562]  Mac Address [ xxxxxx ] 
[AP_PSASMLU/Fatal] 238 : [CSMLUCCore] [t_SettingHubSiteInfo] [563]  Firmware [  ]
[AP_PSASMLU/Fatal] 239 : [CSMLUCCore] [t_SettingHubSiteInfo] [564]  Country Code [ DE ] 
[AP_PSASMLU/Fatal] 240 : [CSMLUCCore] [t_SettingHubSiteInfo] [568] *****************************************************
[AP_PSASMLU/Fatal] 241 : [CSMLUCCore] [t_TryNetworkConnect] [1542] 
[AP_PSASMLU/Fatal] 242 : [CSMLUCCore] [SetState] [1560] [State = 3] 
[AP_PSASMLU/Fatal] 243 : [CSMLUCCore] [m_GetEMPURL] [1470] 
[AP_PSASMLU/Fatal] 244 : [CSMLUCCore] [m_GetEMPURL] [1479] [BRCM7641]chip Special
[AP_PSASMLU/Fatal] 245 : [CSMLUCCore] [m_GetEMPURL] [1489] EMP Param = [BRCM7641,0.970] 
[AP_PSASMLU/Fatal] 246 : [CSMLUCICHubSite] [RequestGetEMPUrl] [168] 
[AP_SWU_CORE_FLASH_DEV/Fatal] 233 : SWUFlashWrapper.cpp:65>flash library is being loading...
[TCFactory::GetOption] option = 45 value = 0
[AP_PSASMLU/Fatal] 247 : [CSMLUCICHubSite] [RequestGetEMPUrl] [194] RequestGetEMPUrl URL = [http://www.samsungrm.net/openapi/device/auth/query

DUID:EXCL6KHUDASYO

MACAddr:c
So what now?
Last edited by Eagle on Fri Dec 07, 2012 1:59 pm, edited 4 times in total.
Top

Post Reply

Return to “BluRay Players”