No SamyGO on patched T-MST10PDEUC-9999.0

[zarigo]

Sorry but I don?t understand...sorry..

please, explain me step by step..

Thanks for you patiente

[juusso]

three modules, check them like you did with cifs.ko

[zarigo]

Code: Select all

F:\>nc
Cmd line: 192.168.1.85 1023
insmod /mtd_down/mount.ko

Code: Select all

F:\>nc
Cmd line: 192.168.1.85 1023
insmod /mtd_down/devpts.ko

Code: Select all

F:\>nc
Cmd line: 192.168.1.85 1023
insmod /mtd_down/pty.ko

With PTY.KO the Tv was OFF until 10seconds aproximated...and after power on...

[juusso]

Download and install SamyGO widget. Check if it starts.
use installation trough develop account.

telnet on 23 or 2023 port
or netcat shell on 1023 (if no telnet on 23)

[zarigo]

Yes, autostart....

Once you turn on the tv takes about 1 minute aprox in appear VIRTUAL USB.

No SSH (22)
No Telnet (23)

[juusso]

Now use ftp and replace files
/mnt/lib/modules/2.6.35.13/kernel/drivers/pty

Re-download archive, has been updated

EDIT: ah damn one subdirectory is missing. i`ll fix it soon

[zarigo]

ONLY:

/mnt/lib/modules/62/2.6.35.13/kernel/

/mnt/lib/modules/64/2.6.35.13/kernel/drivers/pty/ HERE thera are 3 archives...(same as attach)

/mnt/lib/modules/80/2.6.35.13/kernel/

/mnt/lib/modules/81/2.6.35.13/kernel/

Inside the kernel directory there are more subdirectories.....

[juusso]

wait

[juusso]

Smarthub->develop->install SamyGO from url http://tinyurl.com/SamyGO/SamyGO.zip

i mean RE-INSTALL SamyGO.

[zarigo]

Ok..and after?