[SOLVED] CY-STC1100/XC on UExxC6500

Support for C series TVs that all user could ask. Please do not ask a questions at other forums.

User avatar
beatfreak
SamyGO Project Donor
Posts: 568
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

[SOLVED] CY-STC1100/XC on UExxC6500

Post by beatfreak » Fri Jan 31, 2014 4:00 pm

just got my CY-STC1100/XC, under Windows it gets recognized as Moip_HD with VID:04E8 PID:2058

however my TV (UE40C6500 with fw 3011) doesn't recognize it / Skype says cam not found

Code: Select all

# lsmod
Module                  Size  Used by    Tainted: P
fsr 315360 1 fsr_stl, Live 0xbf000000 (P)
fsr_stl 240012 7 - Live 0xbf04e000 (P)
rfs 73968 5 - Live 0xbf08a000 (P)
samdrv 5647608 29 - Live 0xbf09e000 (P)
sdpGMAC 14532 0 - Live 0xbf602000
usbcore 89492 6 dummy_hcd,rt3572sta,usb_storage,ohci_hcd,ehci_hcd, Live 0xbf607000
ehci_hcd 23564 0 - Live 0xbf61e000
ohci_hcd 14980 0 - Live 0xbf625000
usb_storage 23808 3 - Live 0xbf62a000
rt3572sta 659412 0 - Live 0xbf631000 (P)
fb 22128 1 vfb, Live 0xbf6d3000
fb_sys_fops 896 1 vfb, Live 0xbf6da000
syscopyarea 2432 1 vfb, Live 0xbf6dc000
sysfillrect 2528 1 vfb, Live 0xbf6de000
sysimgblt 1600 1 vfb, Live 0xbf6e0000
vfb 2376 0 - Live 0xbf6e2000
fuse 30900 2 - Live 0xbf6e4000
dummy_hcd 12356 1 g_file_storage, Live 0xbf6ed000
g_file_storage 18984 0 - Live 0xbf6f2000
#
also loading the modules manually fails

Code: Select all

# ls -alR /mtd_appdata/moip/
/mtd_appdata/moip/:
drwxr-xr-x    2 root     0             149 Oct 10  2011 .
drwxr-xr-x   29 root     0             438 Oct 10  2011 ..
-rwxr-xr-x    1 root     0           23492 Oct 10  2011 libAVAPI.so
-rwxr-xr-x    1 root     0          292048 Oct 10  2011 libHDCamera.so
-rwxr-xr-x    1 root     0          195780 Oct 10  2011 libSDCamera.so
-rwxr-xr-x    1 root     0           23492 Oct 10  2011 libSoundCardAPI.so
-rwxr-xr-x    1 root     0          591516 Oct 10  2011 mgfw.bin
-rwxr-xr-x    1 root     0          639084 Oct 10  2011 mgfw2.bin
-rwxr-xr-x    1 root     0           48509 Oct 10  2011 ringing.mp3
-rwxr-xr-x    1 root     0           43911 Oct 10  2011 sendcall.mp3
# insmod /mtd_appdata/moip/libAVAPI.so
insmod: cannot insert '/mtd_appdata/moip/libAVAPI.so': Invalid module format (-1): Exec format error
# insmod /mtd_appdata/moip/libHDCamera.so
insmod: cannot insert '/mtd_appdata/moip/libHDCamera.so': Invalid module format (-1): Exec format error
# insmod /mtd_appdata/moip/libSoundCardAPI.so
insmod: cannot insert '/mtd_appdata/moip/libSoundCardAPI.so': Invalid module format (-1): Exec format error
such a big difference?
moeztrabelsi wrote:I attached STC1100 camera and it's working in LE37C650 running latest firmware 3011.0, pushed skype, when started it start updating and now it is working with no problem at all, and the micro can pick up even very low voice
;-)
or do i have to reinstall skype?

manually executing /sbin/usb_mount/usb_moip_cmd brought no difference

output of dmesg:

Code: Select all

usb 1-1: new high speed USB device using ehci-sdp and address 2
usb 1-1: configuration #1 chosen from 1 choice
 ****** HD Product***** 
        MOIP device connected   Manufacturer: Samsung    Product : MoIP_HD
my next steps:
uninstall skype (via app manager)
Downgrade to 3009.2 (via Version.0 method)
Factory reset (via ServiceMenu)
reinstall skype
no skype update
no cam found :(
but hack/SamyGO is still active, so i guess that not everything has been deleted/overwritten...
same with 3015

does this mean i have to format mtd_rwarea, rwcommon and appdata ?
Last edited by beatfreak on Fri May 23, 2014 12:57 pm, edited 1 time in total.
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.

User avatar
greenhorn
SamyGO Project Donor
Posts: 686
Joined: Wed Feb 15, 2012 3:05 pm
Location: Eastern Europe

Re: CY-STC1100/XC on UExxC6500

Post by greenhorn » Fri Feb 07, 2014 10:58 pm

I also have problems with my camera. Some times (rare) camera is not loaded. Anyway, my modules look like:

Code: Select all

# lsmod
Module                  Size  Used by    Tainted: P
fsr 315360 1 fsr_stl, Live 0xbf000000 (P)
fsr_stl 240012 7 - Live 0xbf04e000 (P)
rfs 73968 5 - Live 0xbf08a000 (P)
samdrv 5647608 29 - Live 0xbf09e000 (P)
sdpGMAC 14532 0 - Live 0xbf602000
usbcore 89492 7 usbhid,rt3572sta,usb_storage,ohci_hcd,ehci_hcd, Live 0xbf607000
ehci_hcd 23564 0 - Live 0xbf61e000
ohci_hcd 14980 0 - Live 0xbf625000
usb_storage 23808 2 - Live 0xbf62a000
rt3572sta 659412 0 - Live 0xbf631000 (P)
cifs 212064 1 - Live 0xbf6d3000
evdev 5632 0 - Live 0xbf708000
hid 26468 1 usbhid, Live 0xbf70b000
usbhid 13444 0 - Live 0xbf713000
fuse 30900 2 - Live 0xbf718000
#
TV: UE40F7000 - T-FXPDEUC-1115.0 - SamyGO Extensions on F series
TV: UE55ES7000S - T-ECPDEUC-2003.4 - SamyGO tool Right from USB - no develop account is needed
TV: UE40C6710 - T-VALDEUC 3011 - Hacking TV over Hotel mode (C650 T-VALDEUC-3009.2)
BD-Player: BD-E6100 - B-FIRBPEWWC 1063.3 - rooted, no more Cin@vi@
NAS: CIFS: MAG250 NFS: Playon!HD

User avatar
beatfreak
SamyGO Project Donor
Posts: 568
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

Re: CY-STC1100/XC on UExxC6500

Post by beatfreak » Fri Feb 07, 2014 11:12 pm

the only difference i see is "usbhid" but what human interface device should be used here?

could you post your output of:
dmesg (after plugging cam)

an do you have the libHDCamera.so in appdata/moip ?
what happens when you insmod it?
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.

User avatar
greenhorn
SamyGO Project Donor
Posts: 686
Joined: Wed Feb 15, 2012 3:05 pm
Location: Eastern Europe

Re: CY-STC1100/XC on UExxC6500

Post by greenhorn » Fri Feb 07, 2014 11:21 pm

SpoilerShow

Code: Select all

================================================================================
 SAMSUNG: v2.6.24_SELP_4.3.x_GA(P20)
         (Detailed Information: /sys/selp/vd/lspinfo/summary)                   
================================================================================
[CIP_KERNEL] /dev/tfsr11 can read  (after=0)
[CIP_KERNEL] /dev/tfsr6
[CIP_KERNEL] >>> (/bin/authuld) file is successfully authenticated <<< 
fsr: module license 'Samsung Proprietary' taints kernel.
[BIF:IN ] ++FSR_BML_Init(nFlag: 0x0)

BML: Registered BML Driver.
FSR: Registered STL Driver.
[CIP_KERNEL] count(0), value(0xbadab0da)
=================================================
  DEVICE NAME: Valencia
  VERSION:     0.1
  BUILD DATE:  Mar  3 2011 15:32:09
=============== DEVICE INIT START ===============
Osal init success
OsaInitMmap init success
Registered Dbg driver. Major=0xc828b4c0.
Debug init success
SHDSP init success
AD init success
AE init success
AIO init success
Tsd init success
Mpeg init success
JPEG
Registered JPEG driver. Major=0xc828ba00.
Jpeg init success
INCAPT
Incapt init success
DP
Dp init success
GPIO
GPIO init success
GP
Graphics init success
3D
3D Graphics init success
SE
SE init success
PVR
PVR Record init success
PVR Playback init success
AVD
AVD init success
SYS
Sys init success
CI
Ci init success
NRSS
NRSS init success

=============== DEVICE INIT DONE ================
MFC init success
SAM_Print Module 0x0 is Enabled, giPrintModule=0x1
SAM_Print Init success
SYS_SET_INITIALIZED_MODULE called
SYS_SET_MEMORYMAP_TABLE called
SYS_SET_SYSTEM_CONFIG called
TsdOpen:the count value is bf6008a4
Trying to free already-free IRQ 0
i2c_master_read: I2C ERR: port 3 read error ================
i2c_master_read: I2C ERR: slave dev 0x06 not exist ========
i2c_master_read: I2C ERR: error status 0x92================
sdp_i2c_ioctl: i2c device start byte not ack
i2c_master_read: I2C ERR: port 3 read error ================
i2c_master_read: I2C ERR: slave dev 0x06 not exist ========
i2c_master_read: I2C ERR: error status 0x92================
sdp_i2c_ioctl: i2c device start byte not ack
i2c_master_write: I2C ERR: port 0 write error ================
i2c_master_write: I2C ERR: slave dev 0x4a ================
i2c_master_write: I2C ERR: error status 0x81================
sdp_i2c_ioctl: i2c device start byte not ack
i2c_master_write: I2C ERR: port 0 write error ================
i2c_master_write: I2C ERR: slave dev 0xcc ================
i2c_master_write: I2C ERR: error status 0x81================
sdp_i2c_ioctl: i2c device start byte not ack
i2c_master_write: I2C ERR: port 0 write error ================
i2c_master_write: I2C ERR: slave dev 0xd4 ================
i2c_master_write: I2C ERR: error status 0x81================
sdp_i2c_ioctl: i2c device start byte not ack
i2c_master_comb_read: I2C ERR: port 0 comb read error ================
i2c_master_comb_read: I2C ERR: slave dev 0xca ================
i2c_master_comb_read: I2C ERR: slave not exist or =============
i2c_master_comb_read: I2C ERR: sub address not ack ================
sdp_i2c_ioctl: i2c device start byte not ack
i2c_master_comb_read: I2C ERR: port 0 comb read error ================
i2c_master_comb_read: I2C ERR: slave dev 0xca ================
i2c_master_comb_read: I2C ERR: slave not exist or =============
i2c_master_comb_read: I2C ERR: sub address not ack ================
sdp_i2c_ioctl: i2c device start byte not ack
i2c_master_comb_read: I2C ERR: port 0 comb read error ================
i2c_master_comb_read: I2C ERR: slave dev 0xca ================
i2c_master_comb_read: I2C ERR: slave not exist or =============
i2c_master_comb_read: I2C ERR: sub address not ack ================
sdp_i2c_ioctl: i2c device start byte not ack
i2c_master_write: I2C ERR: port 0 write error ================
i2c_master_write: I2C ERR: slave dev 0x90 ================
i2c_master_write: I2C ERR: error status 0x81================
sdp_i2c_ioctl: i2c device start byte not ack
i2c_master_write: I2C ERR: port 2 write error ================
i2c_master_write: I2C ERR: slave dev 0x90 ================
i2c_master_write: I2C ERR: error status 0x81================
sdp_i2c_ioctl: i2c device start byte not ack
sdp GMAC 10/100M network driver ver 0.956
[SDP GMAC]GMAC remap is 0xdd87e000
[SDP GMAC]DMA remap is 0xdd98e000
[SDP GMAC]Find SDP GMAC ver 1034
realtek 8201E found 3
[SDP GMAC]DMA reset is release(normal status)
[SDP GMAC]eth0: Ethernet address e4:7c:f9:b2:70:1b
[SDP GMAC]eth0: IRQ is 15
[SDP GMAC]Find PHY. PHY ID: 001cc815
eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[SDP GMAC]eth0: Set 100MBps, full-duplex 
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci-sdp ehci-sdp.0: initializing SDP-SOC USB Controller
ehci-sdp ehci-sdp.0: SDP On-chip EHCI Host controller
ehci-sdp ehci-sdp.0: new USB bus registered, assigned bus number 1
ehci-sdp ehci-sdp.0: sdp_ehci_setup success
ehci-sdp ehci-sdp.0: irq 14, io mem 0x30070000
ehci-sdp ehci-sdp.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-sdp ehci-sdp.0: ehci-sdp probing completed.
ehci-sdp ehci-sdp.1: initializing SDP-SOC USB Controller
ehci-sdp ehci-sdp.1: SDP On-chip EHCI Host controller
ehci-sdp ehci-sdp.1: new USB bus registered, assigned bus number 2
ehci-sdp ehci-sdp.1: sdp_ehci_setup success
ehci-sdp ehci-sdp.1: irq 16, io mem 0x30080000
ehci-sdp ehci-sdp.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ehci-sdp ehci-sdp.1: ehci-sdp probing completed.
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-sdp ohci-sdp.0: SDP On-chip OHCI Host controller
ohci-sdp ohci-sdp.0: new USB bus registered, assigned bus number 3
ohci-sdp ohci-sdp.0: irq 20, io mem 0x30078000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ohci-sdp ohci-sdp.1: SDP On-chip OHCI Host controller
ohci-sdp ohci-sdp.1: new USB bus registered, assigned bus number 4
ohci-sdp ohci-sdp.1: irq 21, io mem 0x30088000
usb 1-1: new high speed USB device using ehci-sdp and address 2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
usb 1-1: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
usb 2-1: new high speed USB device using ehci-sdp and address 2
usb 2-1: configuration #1 chosen from 1 choice
 ****** HD Product***** 
	MOIP device connected 	Manufacturer: Samsung 	 Product : MoIP_HD
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
Symbol usb_register_driver is being used by a non-GPL module, which will not be allowed in the future
Please see the file Documentation/feature-removal-schedule.txt in the kernel source tree for more details.
Symbol usb_deregister is being used by a non-GPL module, which will not be allowed in the future
Please see the file Documentation/feature-removal-schedule.txt in the kernel source tree for more details.
rtusb init ---> 20100222 SAC ver 2.2.1.2
VALENCIA Kernel ver : CC Int 78(update 20100217)
usbcore: registered new interface driver rt2870
scsi 0:0:0:0: Direct-Access     TDKMedia Trans-It Drive   PMAP PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: [sda] 15630336 512-byte hardware sectors (8003 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 15630336 512-byte hardware sectors (8003 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda2
Poller thread started for sda, PID = 917
sd 0:0:0:0: [sda] Attached SCSI removable disk
usb-storage: device scan complete
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT: bogus number of FAT structure
VFS: Can't find a valid FAT filesystem on dev sda2.
NTFS-fs warning (device sda2): is_boot_sector_ntfs(): Invalid boot sector checksum.
NTFS-fs error (device sda2): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device sda2): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device sda2): ntfs_fill_super(): Not an NTFS volume.
VFS: Can't find ext3 filesystem on dev sda2.
XFS mounting filesystem sda2
[CIP_KERNEL] count(1), value(0x0)
Ending clean XFS mount for filesystem: sda2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
fuse init (API version 7.8)
fuse distribution version: 2.7.4
[CIP_KERNEL] count(2), value(0x0)
[CIP_KERNEL] count(3), value(0x0)
[CIP_KERNEL] authentication success code!!
[waiterd]Success!
(WRN)[devAeArmComm.c_1300]StaDoEvent: unsupporting SmplFreq 0
(WRN)[devAeArmComm.c_1300]StaDoEvent: unsupporting SmplFreq 0
(ERR)[lldAeArmReg.c_3563]Unknown device ID 1.
(ERR)[lldAeArmReg.c_3261]Unknown device ID 1.
(ERR)[lldAeArmReg.c_3310]Unknown device ID 1.
(ERR)[lldAeArmReg.c_3563]Unknown device ID 1.
(ERR)[lldAeArmReg.c_3261]Unknown device ID 1.
(ERR)[lldAeArmReg.c_3310]Unknown device ID 1.
(ERR)[lldAeArmReg.c_3563]Unknown device ID 1.
(ERR)[lldAeArmReg.c_3261]Unknown device ID 1.
(ERR)[lldAeArmReg.c_3310]Unknown device ID 1.
(ERR)[lldAeArmReg.c_3563]Unknown device ID 1.
(ERR)[lldAeArmReg.c_3261]Unknown device ID 1.
(ERR)[lldAeArmReg.c_3310]Unknown device ID 1.
(ERR)[lldAeArmReg.c_3563]Unknown device ID 1.
(ERR)[lldAeArmReg.c_3261]Unknown device ID 1.
(ERR)[lldAeArmReg.c_3310]Unknown device ID 1.
(ERR)[lldAeArmReg.c_3563]Unknown device ID 1.
(ERR)[lldAeArmReg.c_3261]Unknown device ID 1.
(ERR)[lldAeArmReg.c_3310]Unknown device ID 1.
TV: UE40F7000 - T-FXPDEUC-1115.0 - SamyGO Extensions on F series
TV: UE55ES7000S - T-ECPDEUC-2003.4 - SamyGO tool Right from USB - no develop account is needed
TV: UE40C6710 - T-VALDEUC 3011 - Hacking TV over Hotel mode (C650 T-VALDEUC-3009.2)
BD-Player: BD-E6100 - B-FIRBPEWWC 1063.3 - rooted, no more Cin@vi@
NAS: CIFS: MAG250 NFS: Playon!HD

User avatar
greenhorn
SamyGO Project Donor
Posts: 686
Joined: Wed Feb 15, 2012 3:05 pm
Location: Eastern Europe

Re: CY-STC1100/XC on UExxC6500

Post by greenhorn » Fri Feb 07, 2014 11:25 pm

I have the libHDCamera.so in appdata/moip.
TV: UE40F7000 - T-FXPDEUC-1115.0 - SamyGO Extensions on F series
TV: UE55ES7000S - T-ECPDEUC-2003.4 - SamyGO tool Right from USB - no develop account is needed
TV: UE40C6710 - T-VALDEUC 3011 - Hacking TV over Hotel mode (C650 T-VALDEUC-3009.2)
BD-Player: BD-E6100 - B-FIRBPEWWC 1063.3 - rooted, no more Cin@vi@
NAS: CIFS: MAG250 NFS: Playon!HD

User avatar
beatfreak
SamyGO Project Donor
Posts: 568
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

Re: CY-STC1100/XC on UExxC6500

Post by beatfreak » Fri Feb 07, 2014 11:49 pm

somewhere i have read that when the camera is plugged there are kind of fifo files for audio and video streams created
that would be the last thing i could check to determine if my cam is working
sectroyer wrote:Hi.
The TV has usb and jack audio in (according to manual it's used for PC-->TV connecting with DVI cable). So my question is simple is is possible to use any of this audio sources and pass the data to "/dtv/pcm_in" socket? the app works very nice and I think that the hardware may not be able to process the video so buying skype camera may be a waste of $ but it should be able to handle audio.

here are mine:

Code: Select all

# ll /dtv 
-r--r--r--    1 root     0               0 Jan  1  1970 PART_FLAG_1
-rw-r--r--    1 root     0             924 Jan  1  1970 SGO.env
drwxr-xr-x    2 root     0              80 Jan  1  1970 YWE
-rw-r--r--    1 root     0               4 Jan  1  1970 dropbear.pid
crw-rw-rw-    1 root     0         10, 229 Jan  1  1970 fuse
-rw-r--r--    1 root     0              10 Jan  1  1970 info
-rw-r--r--    1 root     0             227 Feb  7 23:19 lsusbhid.txt
-rw-r--r--    1 root     0               0 Jan  1  1970 pcm_in
-rw-r--r--    1 root     0               0 Jan  1  1970 pcm_out
-rw-r--r--    1 root     0             156 Feb  7 22:52 rcSGO_out
-rw-r--r--    1 root     0             556 Feb  7 21:10 samygo.log
srwxr-xr-x    1 root     0               0 Jan  1  1970 socket
drwxr-xr-x    5 root     0             120 Feb  7 22:52 usb
-rw-r--r--    1 root     0               0 Jan  1  1970 video_in
-rw-r--r--    1 root     0               0 Jan  1  1970 video_out
-rw-r--r--    1 root     0          512000 Jan  1  1970 vusb
# cat /proc/bus/usb/devices 
T:  Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.24_SELP.4.3.x-Cortex-A8 dummy_hcd
S:  Product=Dummy host controller
S:  SerialNumber=dummy_hcd
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0525 ProdID=a4a5 Rev= 3.02
S:  Manufacturer=SamyGO
S:  Product=File-backed for SamyGO
S:  SerialNumber=372041756775
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 1
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.24_SELP.4.3.x-Cortex-A8 ohci_hcd
S:  Product=SDP On-chip OHCI Host controller
S:  SerialNumber=ohci-sdp
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 1
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.24_SELP.4.3.x-Cortex-A8 ohci_hcd
S:  Product=SDP On-chip OHCI Host controller
S:  SerialNumber=ohci-sdp
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.24_SELP.4.3.x-Cortex-A8 ehci_hcd
S:  Product=SDP On-chip EHCI Host controller
S:  SerialNumber=ehci-sdp.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=090c ProdID=1000 Rev=11.00
S:  Manufacturer=LG
S:  Product=USB Drive
S:  SerialNumber=AA00000000000281
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=300mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=31875us

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.24_SELP.4.3.x-Cortex-A8 ehci_hcd
S:  Product=SDP On-chip EHCI Host controller
S:  SerialNumber=ehci-sdp.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs=  1
P:  Vendor=04e8 ProdID=2058 Rev= 0.00
S:  Manufacturer=Samsung
S:  Product=MoIP_HD
S:  SerialNumber=110212
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=400mA
I:* If#= 0 Alt= 0 #EPs= 5 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
# 
Last edited by beatfreak on Sun May 11, 2014 7:01 pm, edited 4 times in total.
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.

User avatar
greenhorn
SamyGO Project Donor
Posts: 686
Joined: Wed Feb 15, 2012 3:05 pm
Location: Eastern Europe

Re: CY-STC1100/XC on UExxC6500

Post by greenhorn » Fri Feb 07, 2014 11:55 pm

This is all I have in the folder...
You do not have the required permissions to view the files attached to this post.
TV: UE40F7000 - T-FXPDEUC-1115.0 - SamyGO Extensions on F series
TV: UE55ES7000S - T-ECPDEUC-2003.4 - SamyGO tool Right from USB - no develop account is needed
TV: UE40C6710 - T-VALDEUC 3011 - Hacking TV over Hotel mode (C650 T-VALDEUC-3009.2)
BD-Player: BD-E6100 - B-FIRBPEWWC 1063.3 - rooted, no more Cin@vi@
NAS: CIFS: MAG250 NFS: Playon!HD

User avatar
beatfreak
SamyGO Project Donor
Posts: 568
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

Re: CY-STC1100/XC on UExxC6500

Post by beatfreak » Sat Feb 08, 2014 12:27 am

i think i will have to send my cam to someone in germany who already has a working stc1100 and can check my cam...
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.

User avatar
beatfreak
SamyGO Project Donor
Posts: 568
Joined: Tue Aug 23, 2011 9:03 am
Location: Hamburg
Contact:

Re: CY-STC1100/XC on UExxC6500

Post by beatfreak » Tue Mar 11, 2014 8:13 pm

what partitions would be safe to erase/format? i want to reset as much as possible and do a really clean reinstall
so rootfs should stay untouched...?!? ^^
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS //
FYI: you can close your ssh session with SamyGO with

Code: Select all

~.
If you can't fix it using dvct tape, you are not using enough dvct tape.

User avatar
juusso
SamyGO Moderator
Posts: 10034
Joined: Sun Mar 07, 2010 6:20 pm

Re: CY-STC1100/XC on UExxC6500

Post by juusso » Tue Mar 11, 2014 8:16 pm

All read only partitions are to be untouched!
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

Post Reply

Return to “[C] Support”