One offtopic question: Would authuld or whatever recognize if i would run a patched modified exeDSP from another place than /mtd_exe/ (if you remember i modified my /mtd_exe/rc.local to run a start.sh placed in /mtd_rwarea/)?
[solved] Cycle reboot UE46C7700 - T-VALDEUC
Re: [solved] Cycle reboot UE46C7700 - T-VALDEUC
Yes, i will patch kernel and correct hashes. Sorry for not being clear with the interesting link: the first part of the title sound interesting: I think about adding a rescue script to rootfs. The question is only what that script should do
One offtopic question: Would authuld or whatever recognize if i would run a patched modified exeDSP from another place than /mtd_exe/ (if you remember i modified my /mtd_exe/rc.local to run a start.sh placed in /mtd_rwarea/)?
One offtopic question: Would authuld or whatever recognize if i would run a patched modified exeDSP from another place than /mtd_exe/ (if you remember i modified my /mtd_exe/rc.local to run a start.sh placed in /mtd_rwarea/)?
Re: [solved] Cycle reboot UE46C7700 - T-VALDEUC
when you have patched kernel and no more restrictions for input, then no need for rescue scripts. No idea about script ATM, might fire up network driver + telnet if exeDSP crashed (no need for exlink cable then). Or just slightly modify the 8282119 script. Use your imagination 
exeDSP: it is doesn`t matter where it starts from. Just hashes of partitions and authuld itself is important.
exeDSP: it is doesn`t matter where it starts from. Just hashes of partitions and authuld itself is important.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: [solved] Cycle reboot UE46C7700 - T-VALDEUC
Ok, i will see if i find some useful script (it's just for the case of 6.5 sec reboot loop ).
Thx for the info regarding exeDSP. So i can play around with it
Just for info: I rehashed the 1st partition successfully and also patched input filtration in both kernels (1st and 2nd partition). I'll offer once more: if there is any interest in T-VALDEUC-1001.4 dumps let me know.
You devs do a great work here! Thank you!
).Thx for the info regarding exeDSP. So i can play around with it
Just for info: I rehashed the 1st partition successfully and also patched input filtration in both kernels (1st and 2nd partition). I'll offer once more: if there is any interest in T-VALDEUC-1001.4 dumps let me know.
You devs do a great work here! Thank you!
-
beatfreak
- SamyGO Project Donor
- Posts: 597
- Joined: Tue Aug 23, 2011 9:03 am
- Location: Hamburg
- Contact:
Re: [solved] Cycle reboot UE46C7700 - T-VALDEUC
way more low-level but,
if 8282119 is only a script,
what about creating a 62617368 script that gets some hex values passed, converts them to ascii characters including whitespaces etc. and then runs the commands?
-> should work on non-patched kernels also..?
if 8282119 is only a script,
what about creating a 62617368 script that gets some hex values passed, converts them to ascii characters including whitespaces etc. and then runs the commands?
-> should work on non-patched kernels also..?
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS // >> decommissioned due to tuner death
//UE46F8090 @ T-FXPDEUC 1136 // rooted by new Widget // root starting with empty usb drive
FYI: you can close your ssh session with SamyGO with
If you can't fix it using dvct tape, you are not using enough dvct tape.
//UE46F8090 @ T-FXPDEUC 1136 // rooted by new Widget // root starting with empty usb drive
FYI: you can close your ssh session with SamyGO with
Code: Select all
~.Re: [solved] Cycle reboot UE46C7700 - T-VALDEUC
yes, but with custom rootfs
if i flash custom rootfs, why then i don't flash patched kernel?
if i flash custom rootfs, why then i don't flash patched kernel?
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
-
beatfreak
- SamyGO Project Donor
- Posts: 597
- Joined: Tue Aug 23, 2011 9:03 am
- Location: Hamburg
- Contact:
Re: [solved] Cycle reboot UE46C7700 - T-VALDEUC
slightly smaller possible cause for errors..^^
//UE40C6500 @ T-VALDEUC 3011 // rooted manual HotelMode style // PVR to NFS via 18MB on-the-fly sparse XFS // >> decommissioned due to tuner death
//UE46F8090 @ T-FXPDEUC 1136 // rooted by new Widget // root starting with empty usb drive
FYI: you can close your ssh session with SamyGO with
If you can't fix it using dvct tape, you are not using enough dvct tape.
//UE46F8090 @ T-FXPDEUC 1136 // rooted by new Widget // root starting with empty usb drive
FYI: you can close your ssh session with SamyGO with
Code: Select all
~.Re: [solved] Cycle reboot UE46C7700 - T-VALDEUC
@beatfreak: good idea! But i already patched the kernel Just for interest: Does exeDSP allow to pass arguments to scripts in /etc/Scripts/CIP?
BTW How did you come to script name '62617368'? Is there any logic behind these numbers?
I will add three scripts: One will load USB drivers without 'sleep' commands and execute a script on USB stick. Second one will load network drivers (Is loading network drivers completely done by running network_init.sh?) and start busybox's telnetd. Third one will just start sh/ash.
Just for interest: Does exeDSP allow to pass arguments to scripts in /etc/Scripts/CIP?BTW How did you come to script name '62617368'? Is there any logic behind these numbers?
I will add three scripts: One will load USB drivers without 'sleep' commands and execute a script on USB stick. Second one will load network drivers (Is loading network drivers completely done by running network_init.sh?) and start busybox's telnetd. Third one will just start sh/ash.
Re: [solved] Cycle reboot UE46C7700 - T-VALDEUC
i think it will pass arguments, its bash script. Use hex symbols as argument A-F,0-9, should work.
p.s. maybe we should close topic and start new one for custom rootfs?
p.s. maybe we should close topic and start new one for custom rootfs?
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: [solved] Cycle reboot UE46C7700 - T-VALDEUC
As you suggested i created a new topic about modifying rootfs here: https://forum.samygo.tv/viewtopic.php?f=10&t=7247