[PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53

[Lordbyte]

Sure looks right to me ..

It is my hope that Zoelechat might comment on your situation.
Zoelechat was a great part in producing this software, and he happens to own an E(S)-model.
It is my hope that he might think up some clue, - otherwise I am more or less unable to help you.
Every detail I can think of is already in verified good order otherwise ..

You might try the rooting-procedure that juuso linked in above post, but that would probably require you
to remove the Evolution-module for the duration of the test ..
But it might be a good thing for the community to have this issue confirmed, if such issue exist.

[zoelechat]

It is my hope that Zoelechat might comment on your situation.

I would have if I had some better ideas than you
Probably something related to evokit and lack of feedback about it...
Just 2 thoughts about what I've seen:
-In a screenshot, I see "ls -al /mtd_rwcommon" command 2 times before any output, is it needed to enter it 2 times?
-It is normal that such command in console has no output, stdout being sent to file :

Code: Select all

df | grep -E "dev.*sd" | awk '{print ""X""$1"",""$2"",""$3,""$4,""$5""}' | sed 's/\/dev\///g' > /mtd_rwcommon/PVRDecoder.msg

And an idea, maybe try ports 1023/2023 for telnet if they're opened? (as they should on "standard" ES SamyGo installation)
IIRC PVRdecoder have different telnet/netcat implementation depending on port, especially to multiply "lucks", as well as SamyGo itself...

[mcreuter]

I would have if I had some better ideas than you
Probably something related to evokit and lack of feedback about it...
Just 2 thoughts about what I've seen:
-In a screenshot, I see "ls -al /mtd_rwcommon" command 2 times before any output, is it needed to enter it 2 times?
-It is normal that such command in console has no output, stdout being sent to file :

Code: Select all

df | grep -E "dev.*sd" | awk '{print ""X""$1"",""$2"",""$3,""$4,""$5""}' | sed 's/\/dev\///g' > /mtd_rwcommon/PVRDecoder.msg

And an idea, maybe try ports 1023/2023 for telnet if they're opened? (as they should on "standard" ES SamyGo installation)
IIRC PVRdecoder have different telnet/netcat implementation depending on port, especially to multiply "lucks", as well as SamyGo itself...

Hey,

-In a screenshot, I see "ls -al /mtd_rwcommon" command 2 times before any output, is it needed to enter it 2 times?

Yes i have to put it 2 times into putty and entering it! Then i get the output!

-And an idea, maybe try ports 1023/2023 for telnet if they're opened? (as they should on "standard" ES SamyGo installation)
IIRC PVRdecoder have different telnet/netcat implementation depending on port, especially to multiply "lucks", as well as SamyGo itself...

With Port 1023 SamyGo says:
"Connecting to 192.168.2.10:21 .. Success
Lade Aufnahmen ...
Verifying telnet access to 192.168.2.10:1023 .. (18/50)
Caching 20140421114717.inf
Verifying telnet access to 192.168.2.10:1023 .. (49/50)
Problem mit TV-Telnet-Zugriff aufgetreten. Bitte Einstellungen ?berpr?fen."

With 2023 the same!
"Connecting to 192.168.2.10:21 .. Success
Lade Aufnahmen ...
Verifying telnet access to 192.168.2.10:2023 .. (49/50)
Problem mit TV-Telnet-Zugriff aufgetreten. Bitte Einstellungen ?berpr?fen."

Ihave take a second time root : viewtopic.php?f=64&t=7417
Test to get the keys: Answer Error

SpoilerShow

(23) --> /mtd_rwcommon/samyGOso -p $(pidof exeTV || pidof exeDSP) -l /mtd_rwcommon/libPVRdumpkeys.so
(23) <--
(23) <--
(21) ---> NOOP

[zoelechat]

Yes i have to put it 2 times into putty and entering it! Then i get the output!

Then, if you enter this command 2 times consecutively through Putty, do you have any output the 2nd time?

Code: Select all

/mtd_rwcommon/samyGOso -p $(pidof exeTV || pidof exeDSP) -l /mtd_rwcommon/libPVRdumpkeys.so

[M11]

Yes i have to put it 2 times into putty and entering it! Then i get the output!

Then, if you enter this command 2 times consecutively through Putty, do you have any output the 2nd time?

Code: Select all

/mtd_rwcommon/samyGOso -p $(pidof exeTV || pidof exeDSP) -l /mtd_rwcommon/libPVRdumpkeys.so

If i remember correctly, then there was no exeTV or exeDSP on 2013 Evolution Kit, it has a different name. I can't remember what it was and i don't have my E8000 anymore, so i can't check.

[zoelechat]

If i remember correctly, then there was no exeTV or exeDSP on 2013 Evolution Kit, it has a different name. I can't remember what it was and i don't have my E8000 anymore, so i can't check.

If the only man having experimented evokit can't give info, it's going to be difficult

@mcreuter
Could you paste output of this command?

Code: Select all

ps -A

[Lordbyte]

Thanks M11,

That would surely explain a lot ..

mcreuter, try finding a running module and insert its name in the command (using putty) like this:

/mtd_rwcommon/samyGOso -p $(pidof nameofrunningmodulehere) -l /mtd_rwcommon/libPVRdumpkeys.so

If you can get this construct working, I can fix your problem by introducing a new setting in the PVRDecoder called "custom TV module" or something

[mcreuter]

Yes i have to put it 2 times into putty and entering it! Then i get the output!

Then, if you enter this command 2 times consecutively through Putty, do you have any output the 2nd time?

Code: Select all

/mtd_rwcommon/samyGOso -p $(pidof exeTV || pidof exeDSP) -l /mtd_rwcommon/libPVRdumpkeys.so

No, no output

[mcreuter]

If i remember correctly, then there was no exeTV or exeDSP on 2013 Evolution Kit, it has a different name. I can't remember what it was and i don't have my E8000 anymore, so i can't check.

If the only man having experimented evokit can't give info, it's going to be difficult

@mcreuter
Could you paste output of this command?

Code: Select all

ps -A

The Output:

SpoilerShow

shell>ps -A
PID USER TIME COMMAND
1 root 0:00 init
2 root 0:00 [kthreadd]
3 root 0:01 [ksoftirqd/0]
6 root 0:00 [migration/0]
7 root 0:00 [migration/1]
8 root 0:00 [kworker/1:0]
9 root 0:00 [ksoftirqd/1]
10 root 0:00 [migration/2]
11 root 0:00 [kworker/2:0]
12 root 0:00 [ksoftirqd/2]
13 root 0:00 [migration/3]
14 root 0:00 [kworker/3:0]
15 root 0:00 [ksoftirqd/3]
16 root 0:00 [khelper]
17 root 0:00 [sync_supers]
18 root 0:00 [bdi-default]
19 root 0:00 [kblockd]
20 root 0:00 [rpciod]
21 root 0:09 [kworker/0:1]
23 root 0:00 [sdp_spid00]
24 root 0:00 [kdtvlogd]
25 root 0:00 [kswapd0]
26 root 0:00 [fsnotify_mark]
27 root 0:00 [nfsiod]
28 root 0:00 [nfs.umountd]
29 root 0:00 [gzwqd]
30 root 0:00 [Gunzip Manager]
31 root 0:00 [vdbinder]
32 root 0:04 [mmcqd/0]
33 root 0:00 [mmcqd/0boot0]
34 root 0:00 [mmcqd/0boot1]
35 root 0:00 [sdp-tmu.0]
36 root 0:00 [kworker/1:1]
48 root 0:00 -/bin/sh
59 root 0:00 [kworker/2:1]
62 root 0:00 [emmcfs-writebac]
64 root 0:00 [emmcfs-writebac]
66 root 0:00 [kworker/3:1]
67 root 0:00 [emmcfs-writebac]
69 root 0:00 {rc.local} /bin/sh /mtd_exe/rc.local
74 root 0:00 ./servicemanager_csp -vdbinder
76 root 0:31 ./RPCAgent_csp -vdbinder
77 root 20:26 ./exeSBB -vdbinder
94 root 0:00 [dvfs_dev]
101 root 0:00 [khubd]
175 root 0:00 [aeMsgTaskMP0]
178 root 0:00 [emmcfs-writebac]
179 root 0:00 [emmcfs-writebac]
183 root 0:00 [emmcfs-writebac]
233 root 0:04 [kworker/u:2]
234 root 0:01 /mtd_appdata/Runtime/bin/X -logfile /mtd_rwarea/Xlog.txt -
modulepath /mtd_appdata/Runtime/XorgLibs -config /mtd_appdata/Runtime/bin/xorg.conf
238 root 0:02 Compositor -vdbinder
274 root 0:00 [emmcfs-writebac]
283 root 0:00 /mtd_cmmlib/BT_LIB/bsa_server -all=0 -diag=0 -hci=0 -l2c=0
-app=0 -btm=0 -sdp=0 -rfc=0 -gap=0 -a2d=0 -avdt=0 -avrc=0 -mca=0 -d /dev/btusb0
-u /dtv/
432 root 0:14 /mtd_exe/WidgetEngine/WidgetEngine
458 root 0:00 [kbase_event]
531 root 0:00 udhcpc -i eth0 -T 2 -b
682 root 0:00 [cfg80211]
692 root 0:00 [loop0]
726 root 0:00 [kworker/0:2]
728 root 1:32 {BrowserLauncher} /mtd_down/widgets/normal/20131000001/bin / rowserLauncher
737 root 0:34 [RtmpTimerTask]
738 root 0:07 [RtmpMlmeTask]
739 root 0:00 [RtmpCmdQTask]
740 root 0:00 [RtmpWscTask]
749 root 0:00 /mtd_cmmlib/WIFI_LIB/RALINK/wpa_supplicant -Dnl80211 -ira1
1n0 -c/mtd_rwarea/network/wpa_sta.conf -N -Dnl80211 -ip2p0 -c/mtd_rwarea/network
/p2p_dual.conf -t -B -O /tmp/wpa_supplicant
761 root 0:02 /mtd_down/emps/empWebBrowser/bin/WebKitWebProcess 14
765 root 0:00 [kbase_event]
799 root 0:10 /mtd_exe/Webkit/WebKitWebProcess 79 WE
800 root 0:00 [kbase_event]
955 root 0:00 /tmp/bin/busybox tcpsvd -vE 0.0.0.0 21 /tmp/bin/busybox ft
pd -w /
956 root 0:00 /tmp/bin/remshd
964 root 0:01 {UEP_killer.sh} /bin/sh /tmp/bin/UEP_killer.sh
1474 root 0:00 [ARS_MON]
1528 root 0:00 /mtd_exe/WebServerApp/bin/lighttpd -D -f /mtd_exe/WebServerApp/webserver/lighttpd.conf -s
1728 root 0:00 [loop4]
1729 root 0:02 /mtd_exe/Webkit/WebKitWebProcess 107 WE
1751 root 0:00 [loop5]
1752 root 0:07 /mtd_exe/Webkit/WebKitWebProcess 112 WE
1865 root 0:04 ./daa
1868 root 0:00 ./MrsServer
1907 root 0:05 {empCamera} Camera -DSINGLE_PROCESS 58 100
2426 root 0:01 [kworker/u:0]
2685 root 0:00 [kworker/u:1]
2780 root 0:00 /tmp/bin/remshd
2799 root 0:00 [flush-179:0]
2843 root 0:00 sleep 10
2844 root 0:00 sh -c ps -A
2845 root 0:00 ps -A
shell>

[mcreuter]

Thanks M11,

That would surely explain a lot ..

mcreuter, try finding a running module and insert its name in the command (using putty) like this:

/mtd_rwcommon/samyGOso -p $(pidof nameofrunningmodulehere) -l /mtd_rwcommon/libPVRdumpkeys.so

If you can get this construct working, I can fix your problem by introducing a new setting in the PVRDecoder called "custom TV module" or something

Can you tell me how? "(pidof nameofrunningmodulehere) "