[ROOT] Rooting E/F on latest firmwares

[stefan81]

Just I suspected. The hack works for you ON EVERY BOOT!!! You can confirm that by using net cat :

Code: Select all

nc ip_of_tv 4023

The problem is your USB

OK the problem is my "usb stick" you mean? What should i do? I don't know what you mean with netcat? Is there a program to connect to tv?

You can download net cat from here:http://eternallybored.org/misc/netcat/
The problem you are experiencing are usually caused by wrong SamyGO_data folder. But since SamyGO "sometimes" starts for you than it means that your SamyGO_data folder should be correct but doesn't work most of the time File /dtv/SamyGO_OK means that the hack worked Probably you should try with different USB stick and set it up from the scratch

I entered the line: "nc64 192.168.178.35 4023" but nothing is happen, no output or answer
I have already tried 3 different usb sticks (2GB, 1GB, 4GB) without success
Maybe I should send you my two folders from the stick?

[sectroyer]

I entered the line: "nc64 192.168.178.35 4023" but nothing is happen, no output or answer
I have already tried 3 different usb sticks (2GB, 1GB, 4GB) without success
Maybe I should send you my two folders from the stick?

There will be no output If you are connected type:

Code: Select all

ls

Code: Select all

cat /proc/mounts

Code: Select all

echo TEST

Any of these

[stefan81]

I entered the line: "nc64 192.168.178.35 4023" but nothing is happen, no output or answer
I have already tried 3 different usb sticks (2GB, 1GB, 4GB) without success
Maybe I should send you my two folders from the stick?

There will be no output If you are connected type:

Code: Select all

ls

Code: Select all

cat /proc/mounts

Code: Select all

echo TEST

Any of these

Ok i know what you mean, it is a program like putty!!!! But when i type a line and press enter, nothing happens, no console starts!
I can't type any command because the netcat nothing work on my windows7 x64.
I have a idea: If samygo starts and we have ftp access, can we edit a samygo autostart file to fix this problem?

[sectroyer]

Ok i know what you mean, it is a program like putty!!!! But when i type a line and press enter, nothing happens, no console starts!
I can't type any command because the netcat nothing work on my windows7 x64.
I have a idea: If samygo starts and we have ftp access, can we edit a samygo autostart file to fix this problem?

SamyGO doesn't start Hack starts SamyGO is on the USB and hack was not able to find your usb Also nothing shows up if you type "ls" in netcat window? Anyway if you see in the hack log "/dtv/SamyGO_OK" as "green" it means everything worked okay but the problem is your usb. Try preparing SamyGO_data once again... Maybe try different filesystem. It also possible that something is wrong with your TV, don't know Do you use WLAN or LAN connection?

[alexhe]

Hi,
following this thread I managed to have ftp-access on my UE55F6500 with MST-FIX the very first time.
Never had ftp-access before and the same issues as stefan81.
Installing the hack succeeded, but no start of samygo when starting tv.

I didn't change any settings of tv, but built a new partition table "msdos" on usb stick and formatted it with FAT16.
Have done this running ubuntu14 on another usb flash drive.
Then copied same files to the usb stick as I've used before.

The very obvious thing which has changed compared to the (felt) million times I've tried before was:
plugged the stick when tv was off and it found MST-FIX-Widget the very first time after starting tv.
All times before I had to plug the stick when smart hub -> more apps was already started.

Installing the hack there was nothing new or different to all times before.
But after first boot ftp access is successful.

I am a little afraid turning off tv and trying it again....

[sectroyer]

Told you that the hack works

[alexhe]

...did some new boots of tv.
SamyGo is working when I start smart hub and change to more apps quickly.
Somehow SamyGo is not starting if I just wait for it to start.

Will observe this behavior for a while and report here.

Gotta head over to SamyGoPCRdecoder...
edit: the next trouble is waiting for me there.
key file cannot be received... but thats another story.

but: is the file /mtd_rwcommon/samyGOso a part of SamyGo from this project or PVRdecrypt?
couse it has wrong permissions set.

Hurray on SamyGO! Everythings working fine now!
Gotta go and buy some long ethernet cable... wifi sucks on big files

[djidji77]

Gotta go and buy some long ethernet cable... wifi sucks on big files

only if you have some poor WiFi router.... I have speed over 50MBs when downloading from my TV via WiFi

[zoelechat]

only if you have some poor WiFi router.... I have speed over 50MBs when downloading from my TV via WiFi

Still only half of cable

but: is the file /mtd_rwcommon/samyGOso a part of SamyGo from this project or PVRdecrypt?
couse it has wrong permissions set.

Well known issue

[MrKalach]

I didn't get root yet. Because I can't run Widget!

If I copy it to USB, TV doesn't see it. If I try install it via widget server, TV says that "SamyGO-F can't be installed via security reason".

Anybody know, what can I do?

ps. TV MODEL and SW in signature.