I've had T-GAS6DEUC-1019.1 loaded up with hospitality hack
Had some problems in the past with missconfiguring the panel type in service menu which in turn screwed up my 3D.
Recently i've stumbled on this post viewtopic.php?p=25931#p25931 and setting the panel type
to 40A1UF4E solved the 3D issue.
Also found this post viewtopic.php?p=27022#p27022 which advices to use the
service menu SVC > Panel Auto Setting option to switch to success. Have tried this numerous times
and with all front colors available but still stays on FAILURE.
Decided to downgrade my FW to use SamyGO in the widget way.
First i've removed hospitality hack by connecting via FTP and removing /mtd_rwarea/start.sh
and /mtd_rwarea/SamyGO.sh files. I taught that these files only start SamyGO extensions
in a non widget way and I went to Smart Hub to also delete the SamyGO widget only I did not
find SamyGO widget there anymore.
Went ahead and followed this post viewtopic.php?t=4199 to downgrade FW.
It went ok with a slight issue: when i've checked from TV's menu for FW update I did not get
a list of available FWs (at least that's what I understood from the above post) and instead
I got the single option to "upgrade" from 1019.1 to 1011.5 which I did (upgrade successfull).
I expected to get back to square one to install the SamyGO widget again but it was already there.
However I am encountering some new issues now:
1) when I open Smart Hub for the first time since TV power on, the TV hangs for a while with the
"Starting..." message in the top-right screen corner (this message was being displayed every time
I powered my TV with hospitality hack which was annoying). Having this delay when starting Smart
Hub first time insted when I turn on PC is a lot better (however I'm not sure why it is there or
why it is needed since I have to start SamyGO widget manually - this is the issue part).
2) first time i launched Smart Hub it said it needed to be updated so I let it. In this process it
deleted all my existing apps (18 or 19) and installed only a few back. One app that I realy like
and want back is Explore 3D. I changed the DNS to normal operation again but every time i go to
Samsung Apps section in Smart Hub it says "Network interference occured" and returns to Smart Hub.
Other online apps are working like YouTube.
3) the final issue is that every time I open Smart Hub and wonder around a few messages appear:
"Smart Hub needs to be updated. Update is starting ..." followed by "Service Update: HotelTV 1/1
Installing service ..." followed by "Service Update: Network is not connected, check network settings
to use this device" ... this happens every time I open Smart Hub
I've searched the forum a little (all 19 pages of viewtopic.php?f=22&t=3501) and i'll keep at it.
Can u guys pls help with this?
Thx