I have searched a lot on internet to find some answers an finaly i belive that i am in the best place. I have a TV LED Samsung UE40ES8000S with a few problems. HDMI1/DVI is not working, it shows on screen no signal. Other ports work corectly. Someone told me that the port is not assigned. I entered in service mode with info/menu/mute/power and I tried Factory Reset (a few times). The problem persist. I don't know what stupid s**t i did, obviously in this service menu, because another problems apeared. Now the WiFi connection cannot be established. When i enter in Newtork menu and then Setup Network it shows me a very short time that he find the router and the available wifi networks and after about 1 second the whole menu disappears. I tried this sereval times and it happens again. I've had 2014.2 FW before, then i make downgrade with ...0000 from you guys, and then i installed 2003.4, then 2006, then 2008.2, then 2009.2 (and finaly i kept this version) and again same problems with WiFi and HDMI1/DVI..
Please dudes! I need some HELP!
AND! there is another little problem. How can i calibrate all available ports that are shown on calibration menu, except HDMI (i managed to calibrate it thanks to you dudes). I belive i must calibrate all because the black color is not black anymore, it is some kind of black violet color
I have a headache with this problems. All this makes me to pull out the tv and throw it to the window and make him an expert calibration
