But if you ready to risk, i could prepare patched firmware in different way.
To be sure, I made procedure on my TV, flashed same way customized firmware and TV still works, this indicates me that chance for success are high (but chance to brick still exists though)
Are you ready?
Benefit is only one: you get the possibility to call SamyGO scripts with TV boot. Other benefits - depends from your needs and from what SamyGO Extensions can (sorry, you have get all the info by yourself...)
But first you have to do some preparation:
1. Enter service menu and set rs232-jack to debug, watchdog off, wiselink wrote on (more detail is explaned in Dump maker how-to, MAKE BEFORE START)
2. run SamyGO Dump maker and give me all the files you get on usb. I have to look at them first.
3. I will give commands you need after i inspect files.
I did everything as outlined in the instruction: downloaded dumpmaker lite, unzipped it into an empty 1gb FAT32 USB drive. Did all the settings change in the in the service menu.
Powered on the TV, went into CL Manager -> USB -> Children -> SamygoHorse2 -> yellow button to select -> hit enter -> Copy All -> Hit "OK" to copy to TV's memory -> a black copy screen pops for a second, and an error message comes up: " An unknown error has occurred. It shows Samygo... 9 File(s) 0.88MB and the error below
Tried it several times, same thing. USB is FAT32, nothing on it just the "samygo-dm" in the root with the rest of the files. I read somewhere a copy/remove function has to be enabled in the CL Manager. Maybe I'm missing something, but I don't have that option. Where do i go to enable the copy function (if that's the problem)?
In the children section I successfully removed both items I had in there (some stories or something), it wiped it clean without a glitch.... Tried different USB stick, the same error...
TV Memory 122.19MB/418.97MB Available
Content Management -> setup -> Screen saver run time: 2 hrs and Save UDN below that. Nothing else...
WiselinkWrite is ON
I could only find dumpmaker ver. 0.2 from here: http://download.samygo.tv/B%20Series/Co ... lications/
PS Out of curiosity I started playing with different extensions run from my USB stick. None of them worked. Not available was the message I got for all of them. Finally I tried ChannelInfo, didn't run either. Then I tried to do a copy to the internal memory and got a message that it's not encrypted with my UDN ( UDN number: STAHM2ZJGNRLV75Q2WFB) . Tried reverting back to the previous firmware 1009 ( I have an option to go back and forth between 1009 and 1010 versions) didn't help either.
Two options left:
1. Revert back to 1009 and install 1008 firmware which i hope is latest unrestricted. Possible, 1009 already has some limitations and installation of lower version is disabled as well (no update file found error)
2. Widget: viewtopic.php?t=1889#p16417
Can I just find 1008 firmware (somehow / somewhere) and install it?
I suggest you to check the widget way, but honestly speaking, here are also problems with widget installation
If you really need 1008 (for what?), i have dump of this firmware, you can flash it (modified as well) to tv via telnet.