[Ended][ROOT] H "Skype" root (FW<=Dec.2014, all T-GFS)

[juusso]

Fat32 should be ok

[Deus3X]

You may try to copy WHOLE SamyGO directory from your rooting usb to usb that is used for recordings then you will have one recording/rooting usb

Hmm, kinda difficult to achieve that since for recording you need EXT2 partition... Unless you create 2 partitions onto usb stick

After that the root procedure is complete, i copied the SamyGo directory (from the fat 32 usb) into the pvr usb, is not needed to get a different partition, fat32 is needed for the installation.

[spiderjuka]

Fat32 should be ok

Hello,

I'm after root procedure.
Nothing was change on my TV???
How Can I check if my TV is rooted?
Could you write me steps what shoudl I do?

How I can activate samba?
I have NAS serwer with samba protocol - user: tv; password: xxxxx; Server IP: 192.168.100.36

Thank you.

[miazza]

May be it is worth to update the first post with a sort of statistics about TV model and FW version where this rooting is working.
My H serie is in the holiday flat ... I will try it only in spring...

[spiderjuka]

Fat32 should be ok

Hello,

I'm after root procedure.
Nothing was change on my TV???
How Can I check if my TV is rooted?
Could you write me steps what shoudl I do?

How I can activate samba?
I have NAS serwer with samba protocol - user: tv; password: xxxxx; Server IP: 192.168.100.36

Thank you.

Please see log file from my USB - I think something is wrong? Could you check it?
My TV is 55H7000. Firmware: 2122
USB - kingston 8GB - format files FAT32 (formated)

Thank you.

[spiderjuka]

Fat32 should be ok

Hello,

I'm after root procedure.
Nothing was change on my TV???
How Can I check if my TV is rooted?
Could you write me steps what shoudl I do?

How I can activate samba?
I have NAS serwer with samba protocol - user: tv; password: xxxxx; Server IP: 192.168.100.36

Thank you.

Please see log file from my USB - I think something is wrong? Could you check it?
My TV is 55H7000. Firmware: 2122
USB - kingston 8GB - format files FAT32 (formated)

Thank you.

Unfortunatelly I can't connect to TV via Telnet.
I think that root procedure for my TV was not done correctly.
But why?

[sectroyer]

Please see log file from my USB - I think something is wrong? Could you check it?
My TV is 55H7000. Firmware: 2122
USB - kingston 8GB - format files FAT32 (formated)

Thank you.

Lol didn't you read previous posts at all? Everything was already described... Just see your own log:

Code: Select all

+ /tmp/bin/busybox losetup /tmp/loopnone /dtv/usb/sda1/SamyGO/samyext4.img
+ /tmp/bin/busybox mount -o sync,exec /tmp/loopnone /mnt
mount: mounting /tmp/loopnone on /mnt failed: Input/output error

Nothing more to say. Same issue as Deus3X

[spiderjuka]

Please see log file from my USB - I think something is wrong? Could you check it?
My TV is 55H7000. Firmware: 2122
USB - kingston 8GB - format files FAT32 (formated)

Thank you.

Lol didn't you read previous posts at all? Everything was already described... Just see your own log:

Code: Select all

+ /tmp/bin/busybox losetup /tmp/loopnone /dtv/usb/sda1/SamyGO/samyext4.img
+ /tmp/bin/busybox mount -o sync,exec /tmp/loopnone /mnt
mount: mounting /tmp/loopnone on /mnt failed: Input/output error

Nothing more to say. Same issue as Deus3X

I'm sorry.
I'm not good at it.
If it possible could you write me what should I do?

Thank you.

[sectroyer]

I'm sorry.
I'm not good at it.
If it possible could you write me what should I do?

Thank you.

Is it possible that you could read previous posts and check EXACTLY what worked for DeusX3?

[zoelechat]

@spiderjuka

Shut down TV. Unplug usb with rooting data. Plug one of your Free usb disk. Start TV and once it loads hit REC It will ask if it can format the disk format and recording something than get back shutdown tv attach SECOND usb (the one with rooting data), start TV

To resume, it seems that having both a recording device AND the rooting USB attached helps. Check Telnet then.

Once Telnet works, check F rooting topic for how-to Samba (see "Features"), it works exactly the same way.
ps: do not use Windows Notepad to create smb_userdata!!! Use Notepad++ and set linefeeds to UNIX format.