Suppose I need more feedback to diagnose this issue .. [Pulling hair out]zoelechat wrote:Perfectly quickly and flawlessly on both 23 (real Telnet) and 2023 (crap Telnet), else I'd have told you.Lordbyte wrote:Does it connect for you, Zoe ?
However, my installation is not really "convential", everything modded by myself from the very first SamyGO-E
[PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.
I provide NO assistance by PM, unless absolutely necessary. Please ask questions in dedicated topics.
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.
@LordByte Can I request a feature? I would like to be able to transfer the decrypted files directly to another usb drive connected to the tv. It would be way faster, considering that wifi is too slow for those large files and lan is not working properly for me, as I already reported before.
Do you think you could implement this feature?
Do you think you could implement this feature?
Last edited by tendi on Sun Jan 04, 2015 6:43 pm, edited 1 time in total.
Tv model: UE40H6400
Firmware: T-MST14DEUC-2117.5
Firmware: T-MST14DEUC-2117.5
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.
@Tendi, you should ask sectroyer about his libNoDRM.so
I provide NO assistance by PM, unless absolutely necessary. Please ask questions in dedicated topics.
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.
Hi everyone,
I just rooted my tv (40H6400, fw 2121.6), recorded some clips and tried to decode with PVRDecoder 1.7.3.31.
PVRDecoder find the clips and start processing, this is the log:
Connecting to 192.168.1.10:21 .. Success
Querying recordings on TV ...
Verifying telnet access to 192.168.1.10:3123 .. Success
All recordings on USB listed. Waiting for user.
Examining DRM status for file ...
Recording is not DRM protected.
Retrieved 17,38 Mb of 17,38 Mb ..
File successfully retrieved.
Operation finished .. Waiting for user..
All recordings on USB listed. Waiting for user.
Operation finished .. Waiting for user..
I can find the TS generated, but it is not recognized by anyone - in the log it says is not protected, but probably it is?
What I'm doing wrong?
Thank you very much for any support!
ADDED INFORMATION:
the tv is a H6400 that I had to "change" to a H6500 via service menu to enable PVR
I just rooted my tv (40H6400, fw 2121.6), recorded some clips and tried to decode with PVRDecoder 1.7.3.31.
PVRDecoder find the clips and start processing, this is the log:
Connecting to 192.168.1.10:21 .. Success
Querying recordings on TV ...
Verifying telnet access to 192.168.1.10:3123 .. Success
All recordings on USB listed. Waiting for user.
Examining DRM status for file ...
Recording is not DRM protected.
Retrieved 17,38 Mb of 17,38 Mb ..
File successfully retrieved.
Operation finished .. Waiting for user..
All recordings on USB listed. Waiting for user.
Operation finished .. Waiting for user..
I can find the TS generated, but it is not recognized by anyone - in the log it says is not protected, but probably it is?
What I'm doing wrong?
Thank you very much for any support!
ADDED INFORMATION:
the tv is a H6400 that I had to "change" to a H6500 via service menu to enable PVR
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.
@texx,
Could you upload a zip to www.sendspace.com perhaps and PM me the link, please ?
Zip should contain the .srf and .inf of the recording in question.
You are welcome to cut .srf down to a few kilobyte ..
I just need to exam its header and to see why PVRDecoder fails to detect its DRM, if your theory is correct.
Could you upload a zip to www.sendspace.com perhaps and PM me the link, please ?
Zip should contain the .srf and .inf of the recording in question.
You are welcome to cut .srf down to a few kilobyte ..
I just need to exam its header and to see why PVRDecoder fails to detect its DRM, if your theory is correct.
I provide NO assistance by PM, unless absolutely necessary. Please ask questions in dedicated topics.
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.
yesLordbyte wrote:@Tendi, you should ask sectroyer about his libNoDRM.so
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.
@texx,
Does original recording play on TV ?
Does original recording play on TV ?
I provide NO assistance by PM, unless absolutely necessary. Please ask questions in dedicated topics.
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.
@Lordbyte
Yes sure, on the tv I can see my recordings...
Yes sure, on the tv I can see my recordings...
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.
@texx,
The funny thing is that *my* PVRDecoder DOES find that DRM is active, and then tries to load sectroyers TV-side decoder.
But the decoder dosent like your files, so it goes dead without telling the PVRDecoder (PVRDecoder waits for message in TV-side decoders logfile).
Thus the entire ecosystem comes crashing down here in my lab .. and as files are native to your TV, I cant do much forensics.
Still thinking
The funny thing is that *my* PVRDecoder DOES find that DRM is active, and then tries to load sectroyers TV-side decoder.
But the decoder dosent like your files, so it goes dead without telling the PVRDecoder (PVRDecoder waits for message in TV-side decoders logfile).
Thus the entire ecosystem comes crashing down here in my lab .. and as files are native to your TV, I cant do much forensics.
Still thinking
I provide NO assistance by PM, unless absolutely necessary. Please ask questions in dedicated topics.
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.7.3.
Maybe I should try uninstalling and reinstalling the SamyGO app? Can this have some influence? Everything else works ok...
Lordbyte wrote:@texx,
The funny thing is that *my* PVRDecoder DOES find that DRM is active, and then tries to load sectroyers TV-side decoder.
But the decoder dosent like your files, so it goes dead without telling the PVRDecoder (PVRDecoder waits for message in TV-side decoders logfile).
Thus the entire ecosystem comes crashing down here in my lab .. and as files are native to your TV, I cant do much forensics.
Still thinking