[Ended][ROOT] H "Skype" root (FW<=Dec.2014, all T-GFS)

[juusso]

@dabeni, /dtv/usb/sda1/samygo.log is important as well

@leikli, you been moved to separate thread here: viewtopic.php?f=70&t=8536

[papabong]

Having my fingers crossed that we will have a working solution for HUs soon !

kind regards

papa

Did you try the solution p provided by other NON-MST users: unplugging TV from the power supply ?

Yes i did unplug the unit for a couple of minutes but it didnt work.
I also did a complete reset of the unit again, set everything up as described (skype, etc), unplugged the power supply for reboot. Nothing happend - only loading screen of skype

[Steveb2l8]

HI, i have an UE22H5610AYXZT with FW2130 OTN disabled, tried to root it

IMG_1153.JPG

after that exit -> pwr off -> pwr on and TV start rebooting (3/4 times) when fixed tried to telnet on port 33 and 3123 without success.
I would like to try with the PWR on suggestion , but when i activate it from service men? and pwr off/on TV i get "not available" when try to rec and no format HD options in menu.
so checked in service menu and PVR is again off can someone help me.

Thanks in advance

About enabling the PVR recording, I have experience in this: enabling the PVR on the service menu is not sufficient if the model is stated as "not PVR Ready".
I had the same problem with my 40H6400 -> you need to:
* enter the service menu with INFO + FACTORY
* select a model that allows PVR recording (I had to change to H6500, that is quite identical to mine)
* disable adain OTN support (will be enabled again)
and than you'll find finally recoring enabled. (finger crossing....)

Thanks, when you say INFO+FACTORY means from tv powered off?
Because I tried but nothing happen! Or you mean with service menu opened before with INFO+MENU+MUTE+POWER?

Regards

[Lordbyte]

Thanks, when you say INFO+FACTORY means from tv powered off?
Because I tried but nothing happen! Or you mean with service menu opened before with INFO+MENU+MUTE+POWER?

Regards

1) Make sure TV is powered OFF
2) Press INFO+MENU+MUTE+POWER (4 different key-presses)
3) TV should now turn on, and ... 2-5 seconds later, display the factory menu.
4) Change whatever settings you want.
5) Turn off TV to get rid of factory menu again.

[spiderjuka]

Well check if ANY key shuts down your bluray or whatever you wanted to shutdown

Hello,

I checked all 254 keys.
Only one KEY can switch power off on TV. It is BD_KEY_POWER=2.
But key is not working properly, it should Power OFF TV but unfortunately it resets TV.
Why? Is it possible to change something in init.d files?
Is it any another CMD commands like micom shoutdown which will make Power Off TV (Stand By).
Thank you.

Hello,
I would like to share with you an one important information regarding TV model H7000 and higher models I think too.
After sucessful installing root on my TV I had one problem. After swich OFF TV (by press red button on remote control) TV was reset instead switch off.
The root cause of this problem is in the settings of the TV:
Menu/System/General/Quickly Power OFF Samsung - this option must be OFF.
When this option is enabled and TV already rooted after pressing red button TV instead switch off is reset.
I think that this option it is special setting which doesn't exist in TV model below H7000. That is explanation why only I have this problem.
Everybody who has H7000 please check it and confirm if problem exist after root TV and if the problem will disapper after change special option in main menu.
Best Regards.

[tonis]

Tried, 48H6400 with firmware T-MST14DEUC-2134.3 not root.
Do not update, so I bought it.
Log does not form.

[Steveb2l8]

HI, i have an UE22H5610AYXZT with FW2130 OTN disabled, tried to root it

IMG_1153.JPG

after that exit -> pwr off -> pwr on and TV start rebooting (3/4 times) when fixed tried to telnet on port 33 and 3123 without success.
I would like to try with the PWR on suggestion , but when i activate it from service men? and pwr off/on TV i get "not available" when try to rec and no format HD options in menu.
so checked in service menu and PVR is again off can someone help me.

Thanks in advance

About enabling the PVR recording, I have experience in this: enabling the PVR on the service menu is not sufficient if the model is stated as "not PVR Ready".
I had the same problem with my 40H6400 -> you need to:
* enter the service menu with INFO + FACTORY
* select a model that allows PVR recording (I had to change to H6500, that is quite identical to mine)
* disable adain OTN support (will be enabled again)
and than you'll find finally recoring enabled. (finger crossing....)

Thanks, when you say INFO+FACTORY means from tv powered off?
Because I tried but nothing happen! Or you mean with service menu opened before with INFO+MENU+MUTE+POWER?

Regards

I don't have "model" setting in my menu !!!

Any idea?
Thanks

[Steveb2l8]

HI, i have an UE22H5610AYXZT with FW2130 OTN disabled, tried to root it

IMG_1153.JPG

after that exit -> pwr off -> pwr on and TV start rebooting (3/4 times) when fixed tried to telnet on port 33 and 3123 without success.
I would like to try with the PWR on suggestion , but when i activate it from service men? and pwr off/on TV i get "not available" when try to rec and no format HD options in menu.
so checked in service menu and PVR is again off can someone help me.

Thanks in advance

About enabling the PVR recording, I have experience in this: enabling the PVR on the service menu is not sufficient if the model is stated as "not PVR Ready".
I had the same problem with my 40H6400 -> you need to:
* enter the service menu with INFO + FACTORY
* select a model that allows PVR recording (I had to change to H6500, that is quite identical to mine)
* disable adain OTN support (will be enabled again)
and than you'll find finally recoring enabled. (finger crossing....)

Thanks, when you say INFO+FACTORY means from tv powered off?
Because I tried but nothing happen! Or you mean with service menu opened before with INFO+MENU+MUTE+POWER?

Regards

I don't have "model" setting in my menu !!!

Any idea?
Thanks

[Vanav]

Hello.
I have model UE55HU8500 (in Europe it is called UE55HU7500T, in Germany: UE55HU7590L, in USA: UN55HU8550FXZA),
CPU: Golf.P (Samsung), firmware T-GFP8DEUC-2180.4. Is it supported?
I've followed instructions, there were no errors on screen (all green), there were no extra reboots, Skype become not functional, no logs on flash drive, no telnet. How can I debug this?

[juusso]

unplug from power supply did not help either?