Also you probably didn't disable OTN SupportLaserMan wrote:I was very careful to use the E method. Unpacked SamyGO_data_E_.zip and SamyGO-F-SM-AutoStart-USB.zip to a FAT USB. Even so, on the TV screen is says F Series. Several lines of code are red in the log (as in previous screenshot) and installation loops.
regardsThat's not the problem!!! It's a featurecmuc05 wrote:When 90 minutes are reached it breaks. Es 6300. Has anyone this problem too?
Just ask samsung Code: Select all
#!/bin/sh
#
# ? Copyright 1996-2010, ZsoltTech.Com
# by Ser Lev Arris <arris@ZsoltTech.Com>
#
# donated for the SamyGo Project
# http://samygo.sourceforge.net/
# depending on some other coders of the samygo-forum and also on
# Version: SamyGO svn $Id: 03_03_nfsmount.init 1069 2011-01-03 16:47:24Z arris69 $
#############-Some Variables-####################
V_USB="sdr" # Aka name usb-device with 1 partition
R_USB="sdw" # Aka name record-device
USB_NAME="Rec-TS" # symbolic name of usb-device
REC_NAME="Rec-Nativ" # symbolic name of record-device
###############################################
#sed -i -e "s,MountPlaceholder,/dtv/usb/${V_USB}," /dtv/SGO.env
sed -i -e "s,MountPlaceholder,/dtv/usb/${R_USB}," /dtv/SGO.env
. /dtv/SGO.env
# Share_X = '<ServerIP>:<SHAREPATH>:<NAME_OF_MOUNT>'
# RECORDSHARE='<ServerIP>:<SHAREPATH>'
RECORDSHARE='192.168.0.50:/data/SamyGo'
SHARE_1='192.168.0.50:/data/SamyGo:TS'
#SHARE_1=''
FR_NAME="NFS Server"
M_OPTS="soft,tcp,nolock"
SERVERS="Don't set me!!"
DEST_DIR=$MOUNT_PATH
RECDIR=/dtv/usb/${R_USB}
echo "DEST_DIR="$DEST_DIR
echo "RECDIR="$RECDIR
do_mount()
{
echo "do_mount: 1=$1 2=$2 3=$3"
if [ -n "$3" ]; then
# M_POINT="$DEST_DIR/$3" # with name of directory
M_POINT="$DEST_DIR" # mount direct so that there only will be the hierarchy tree you have in your share
else
M_POINT="$DEST_DIR/$1/$(echo -n "$2" | sed -e "s/\//_/g")"
#M_POINT="$DEST_DIR/$(echo -n "$2" | sed -e "s/\//_/g")"
fi
echo "M_POINT="$M_POINT
mkdir -p "$M_POINT"
if [ `cat /proc/mounts | grep -c "$M_POINT"` -lt "1" ] ; then
/bin/busybox mount -o "$M_OPTS" "$1:$2" "$M_POINT"
if [ $? = 0 ]; then
echo "Share $1:$2 successfully mounted on $M_POINT"
else
echo "Error during mount of $1:$2 on $M_POINT"
fi
else
echo "Share $1:$2 is already mounted!"
fi
}
mount_record()
{
if [ -n "$RECORDSHARE" ]; then
M_POINTREC="$RECDIR"
mkdir -p "$M_POINTREC"
if [ `cat /proc/mounts | grep -c "$M_POINTREC"` -lt "1" ] ; then
/bin/busybox mount -o "$M_OPTS" "$1:$2" "$M_POINTREC"
if [ $? = 0 ]; then
echo "NFS_PATH=$M_POINTREC" >> /dtv/SGO.env
# mount -t xfs -o loop "$RECDIR"/PVR/pvrimage" "$RECDIR"/PVR/Wohnzimmer"
echo "Share $1:$2 successfully mounted on $M_POINTREC"
else
echo "Error during mount of $1:$2 on $M_POINTREC"
fi
else
echo "Share $1:$2 is already mounted!"
fi
fi
}
get_shares()
{
ENDARRAY=false
N=1
while [ $ENDARRAY = false ]
do
eval SHARE=\${SHARE_${N}}
if [ -z "$SHARE" ]; then
ENDARRAY=true
else
SERVER=`echo "$SHARE"|cut -d ':' -f1`
SHPATH=`echo "$SHARE"|cut -d ':' -f2`
SHNAME=`echo "$SHARE"|cut -d ':' -f3`
echo -n "Check if server $SERVER is reachable..."
showmount --no-header -e $SERVER 1>/dev/null 2>&1
if [ $? = 0 ]; then
echo 'ok'
do_mount "$SERVER" "$SHPATH" "$SHNAME"
else
echo 'NOT reachable skip!'
fi
let N=N+1
fi
done
if [ -n "$RECORDSHARE" ]; then
RECSERVER=`echo "$RECORDSHARE"|cut -d ':' -f1`
RECSHPATH=`echo "$RECORDSHARE"|cut -d ':' -f2`
echo -n "Check if server $RECSERVER is reachable..."
showmount --no-header -e $RECSERVER 1>/dev/null 2>&1
if [ $? = 0 ]; then
RECAVAIL=true
echo 'ok'
mount_record "$RECSERVER" "$RECSHPATH"
sleep 5 # it is even working without the sleep in my case
else
echo "$RECSERVER NOT reachable skip!"
RECAVAIL=false
fi
else
echo "No Record-Share available!"
fi
}
get_servers()
{
if [ -z "$SERVER" ] ; then
# SERVERS=$(cat /proc/net/arp | grep -v "IP address" | cut -d " " -f1)
SERVERS=$(cat /proc/net/arp | grep -v "IP address" | sed 's/^\(\w*.\w*.\w*.\w*\) *.*/\1/')
else
SERVERS=$SERVER
fi
}
anounce_usb()
{
if [ -e /dtv/usb/usblog ] ; then
echo ""
else
touch /dtv/usb/usblog
fi
if [ `cat /dtv/usb/usblog | grep -c "$R_USB"` -lt "1" ] ; then
cp -f /dtv/usb/usblog /dtv/usb/usblog.bak
#### VIRTUALUSB "NFS-SERVER" ####
if [ `cat /proc/mounts | grep -c "$M_POINT"` > "0" ] ; then
echo -e "[$V_USB]\nVendor : Home\nProduct : $USB_NAME\nSerial : 30122011\nDevpath : 7\n\
Lun : 0\nScsiDevicePath : /dev/${V_USB}1\nMountDir : $DEST_DIR\nFileSystem : vfat\n" >> /dtv/usb/usblog
else
echo "No Nfs-Share mounted!"
fi
#### VIRTUALUSB "RECORDER" ####
if [ -n "$RECORDSHARE" ]; then
if [ `cat /proc/mounts | grep -c "$M_POINTREC"` > "0" ] && [ $RECAVAIL = true ] ; then
echo -e "[$R_USB]\nVendor : Home\nProduct : $REC_NAME\nSerial : 21052013\nDevpath : 8\n\
Lun : 1\nScsiDevicePath : /dev/${R_USB}1\nMountDir : $RECDIR\nFileSystem : xfs\n" >> /dtv/usb/usblog
else
echo "No Record-Share mounted!"
fi
fi
fi
}
case $1 in
start)
# for systems with modular nfs kernel support
insmod $MOD_DIR/kernel/net/sunrpc/sunrpc.ko
insmod $MOD_DIR/kernel/fs/lockd/lockd.ko
insmod $MOD_DIR/kernel/fs/nfs/nfs.ko
get_servers
get_shares
anounce_usb
;;
stop)
# may can fail if device access the mount from content library
# for i in $(cat /proc/mounts | grep nfs | cut -d " " -f2) ; do
cp -f /dtv/usb/usblog.bak /dtv/usb/usblog
for i in $(cat /proc/mounts | grep "$DEST_DIR" | sed 's/^\(.*\) \(.*\) nfs .*/\2/') ; do
/bin/busybox umount $i
done
for i in $(cat /proc/mounts | grep "$RECDIR" | sed 's/^\(.*\) \(.*\) nfs .*/\2/') ; do
/bin/busybox umount $i
done
;;
status)
/bin/mount | grep "$DEST_DIR"
/bin/mount | grep "$RECDIR"
;;
*)
echo "Usage: $0 {start|stop|status}" 1>&2
exit 0
;;
esac
Don't use this script (@zoelchat I told you "other" solutions are buggycmuc05 wrote:No, I know that the original timeshift is only made for 90 minutes.
). Use "my solution" it works EXACTLY as USB-HDD These scripts are moving from series to series without any changes since B. Nothing surprising that they're not suitable anymoresectroyer wrote:Don't use this script (@zoelchat I told you "other" solutions are buggy