[ROOT] H "Network" root (FW<=Oct.2015, no T-GFS)

[vivion]

Root access is obtained only once.
Step SamyGO work on my TV :
9.When it finishes it will ask to reboot TV.
10.Reboot TV and wait 5 minutes.
Then I see SamyGO Virt.USB but do next

• 11.Power OFF TV and UNPLUG USB.
  12. On PC check USB. You should see following files:
  
  insmod_qca.sh OR insmod_bcm.sh
  network_type_info.txt
  wifi_vendor.txt
  SamyGO/vermagic.txt
  
  13.Make a backup of those files, they WILL CHANGE AFTER NEXT BOOT and you WILL NEED THEM LATER!!!
  14.Double click patch.bat (Linux/Unix/Mac OS X users should use patch.sh) wait for it to finish and make print screen of output.
  15.Connect USB to TV
  16.Power ON TV and wait 5 minutes (try wait 10 - 20 min).

SamyGO no started and no SamyGO Virt.USB and acceses telnet/ftp/etc. should work.

To once again work necessary to make steps
6.Connect USB to TV
7.Launch ONLY ONCE InstallSamyGO-H from SmartHub (if it doesn't appear reboot TV). Sometimes it is necessary to connect USB WHILE TV IS OFF!!!
The widget will automatically finish installation (No need to push any buttons).
9.When it finishes it will ask to reboot TV.
10.Reboot TV and wait 5 minutes.

Ehh When you DO SEE SamyGO Virtual USB. Simply power off TV. Wait 5 minutes and power ON. Wait 10 minutes Simply should work

Waiting 10 minutes and more
The problem is not solved, have other ideas?

[sectroyer]

Waiting 10 minutes and more
The problem is not solved, have other ideas?

Are you CONSTANTLY on Wi-Fi? If you wait. Does telnet on port 3123 or netcat on port 3023 work ?

[Blueshroom]

Hi! I have a strange problem rooting my UE40H6270 T-MST14DEUC-2600.4
Samygo installation dont start, it wont continue to the installation screen,as shown in the picture and nothing happens for 30 seconds or so, after that tv returns to smarthub.
I have dissalbeld OTN, and watchdog in the service menu, and blocked webstites on my router and have connected a second usb stick formated for tv recordings. TV is conected via Wifi and lan cabele is removed
No log files or any changes on the rooting usb stick, quick power on/off don?t exist in the system menu.
Any idea?s how i could solve the problem? Thanks for any information

[vivion]

Waiting 10 minutes and more
The problem is not solved, have other ideas?

Are you CONSTANTLY on Wi-Fi? If you wait. Does telnet on port 3123 or netcat on port 3023 work ?

Wi-Fi connected always, the LAN cable is not connected to the port.
Before reboot TV have accese FTP, telnet port 23 ssh 22 work, telnet 3123 can't access tty; job control turned off.
also logusb when i have acceses http://ctrlv.it/id/2609/4015180153

[vivion]

Yet for the first time when I got root access. I was not attentive and did not make this point.

To "create" a recording device: Shut down TV. Unplug usb with rooting data. Plug one of your free USB disks. Start TV and once it loads hit REC, it will ask if it can format the disk. Format and record something then shutdown TV, attach SECOND usb (the one with rooting data), start TV

. Maybe need do again root but remove all files root. This command

rm /mtd_rwarea/network/runSamyGO.sh

for del root skype. Which files need delete or change to gets the root from begin the first step?

[zoelechat]

No point in following any Skype root related step. No T-NT14 supports it.

[vivion]

Yes i see. But i am use another rooting method not skype.If do root without

To "create" a recording device: Shut down TV. Unplug usb with rooting data. Plug one of your free USB disks. Start TV and once it loads hit REC, it will ask if it can format the disk. Format and record something then shutdown TV, attach SECOND usb (the one with rooting data), start TV

only steps 1 - 17 What get?

[zoelechat]

rm /mtd_rwarea/network/runSamyGO.sh

To be used ONLY if you change root for Skype one, as 1st post states, that's why I warn you.

only steps 1 - 17 What get?

You must not "select" steps, just follow EVERYTHING.

[vivion]

yes understood. I have root but only if reboot or switch off tv Access to the root stops and does not work. Again, I repeat all the points it works, but only until the next shutdown tv.

[BIGBABA]

Thanks for your help. Sorry i make it with Iphone and send to PC via e-mail

Don't put it on your iPhone Photos with my iPhone are AWESOME BTW I have updated InstallSamyGO-H in fist post. Hopefully bug is now fixed

now i see only InstallsamyGO-H and it dont start. after 1 minute it takes me back to smarthub