[ROOT] Rooting E/F on latest firmwares

[skywiesel]

Need Help! When i switch on my TV UE65F8080 it goes after 1-2 min automaticly off, so i have no chance to change something.
What can i do? Is it a Problem of rooting (new version)??

[zoelechat]

Did you disable watchdog in service menu?

[noahjoseph]

How can i delete samygo safely?

[zoelechat]

How can i delete the root and samygo if there are any issues?

How can i delete samygo safely?

Unplug USB, remove widget from Smarthub if any, done.

[idladues]

rooting works on UE40F6340 FW:2112,4

but one problem..no connect to Telnet.....:O

FTP works

[gjstroom]

I have some problems with the root of my 46F8090 (T-FXPDEUC_1128.1).
It looks like the samygoautostart doesn't work properly, I have some weird issues.
Normally I watch tv via a VU+ Solo SE connected by hdmi and Anynet+ enabled.
When I switch on the tv my receiver and Vu+ also power on by hmdi-cec. Sometimes the root starts, sometimes not, it looks like it's waiting for something. Then sometimes when I go to the tv menu the root becomes activated, but also not every time.
When I switch to tv, sometimes it works, but also sometimes the tv becomes unresponsive and restarts. When it works, the root starts when I switch to an encrypted channel.
Mostly when I switch on the tv in tv mode the root works instant, but also it becomes activated when switching to a encrypted channel.
I also have lots of issues with connecting and disconnecting Anynet+.
Anny suggestions ?

[LS29]

I have some problems with the root of my 46F8090 (T-FXPDEUC_1128.1).
It looks like the samygoautostart doesn't work properly, I have some weird issues.
Normally I watch tv via a VU+ Solo SE connected by hdmi and Anynet+ enabled.
When I switch on the tv my receiver and Vu+ also power on by hmdi-cec. Sometimes the root starts, sometimes not, it looks like it's waiting for something. Then sometimes when I go to the tv menu the root becomes activated, but also not every time.
When I switch to tv, sometimes it works, but also sometimes the tv becomes unresponsive and restarts. When it works, the root starts when I switch to an encrypted channel.
Mostly when I switch on the tv in tv mode the root works instant, but also it becomes activated when switching to a encrypted channel.
I also have lots of issues with connecting and disconnecting Anynet+.
Anny suggestions ?

I thing, You need disable watchdog in Service Menu!

[idladues]

somebody an idea why i have FTP permisson but no Telnet permission..

i this normal ?

SpoilerShow

===========================
Starting UEP_killer.sh
===========================
+ ./etc/rc.sysinit
Segmentation fault
Segmentation fault
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/drivers/pty/anyver.ko': No such file or directory
checking /dtv/usb/sda1
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/drivers/pty/newmount.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/drivers/pty/newdevpts.ko': No such file or directory
mkdir: can't create directory '/dtv/pts/': File exists
Segmentation fault
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/drivers/pty/newpty.ko': No such file or directory
mount: mounting /mtd_rwarea/profile on /etc/profile failed: Invalid argument
can not mount profile!
mount: mounting /mtd_rwarea/passwd on /etc/passwd failed: Invalid argument
can not mount passwd
ln: /dtv/bin/dropbearkey: No such file or directory
ln: /dtv/bin/dropbear: No such file or directory
ln: /dtv/bin/scp: No such file or directory
cp: can't create '/dtv/bin/rmmod': No such file or directory
mount: mounting /dtv/bin/sh on /bin/sh failed: Invalid argument
/mnt/etc/init.d/02_01_sshd.init: line 57: dropbearkey: not found
/mnt/etc/init.d/02_01_sshd.init: line 57: dropbear: not found
Segmentation fault
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/drivers/usb/gadget/udc-core.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/drivers/usb/gadget/libcomposite.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/drivers/usb/gadget/dummy_hcd.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/drivers/usb/gadget/gadgetfs.ko': No such file or directory
real storage device at: /sys/block/sda/device/model (sda)
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/crypto/aead.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/crypto/pcompress.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/crypto/crypto_blkcipher.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/crypto/cryptomgr.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/crypto/md4.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/crypto/md5.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/crypto/hmac.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/crypto/des_generic.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/crypto/rng.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/crypto/crypto_wq.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/crypto/chainiv.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/crypto/eseqiv.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/crypto/arc4.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/crypto/ecb.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/crypto/krng.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/crypto/ansi_cprng.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/crypto/sha256_generic.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/fs/fuse/fuse.ko': No such file or directory
insmod: can't read '/mnt/lib/modules/3.0.33/kernel/fs/cifs/cifs.ko': No such file or directory
Search Shares
on: 192.168.178.1
Segmentation fault
on: 192.168.178.176
Segmentation fault
on: 192.168.178.28
Segmentation fault
Segmentation fault

[gjstroom]

I have some problems with the root of my 46F8090 (T-FXPDEUC_1128.1).
It looks like the samygoautostart doesn't work properly, I have some weird issues.
Normally I watch tv via a VU+ Solo SE connected by hdmi and Anynet+ enabled.
When I switch on the tv my receiver and Vu+ also power on by hmdi-cec. Sometimes the root starts, sometimes not, it looks like it's waiting for something. Then sometimes when I go to the tv menu the root becomes activated, but also not every time.
When I switch to tv, sometimes it works, but also sometimes the tv becomes unresponsive and restarts. When it works, the root starts when I switch to an encrypted channel.
Mostly when I switch on the tv in tv mode the root works instant, but also it becomes activated when switching to a encrypted channel.
I also have lots of issues with connecting and disconnecting Anynet+.
Anny suggestions ?

I thing, You need disable watchdog in Service Menu!

Disabling only fixes the restarts, now the tv just freezes, and I need to unplug it from power.

[sectroyer]

Disabling only fixes the restarts, now the tv just freezes, and I need to unplug it from power.

Sound like firmware DOWNgrade might be needed