[PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53

[blendstylez]

i will do my best, thats for shure..but if i burn my psu thrn i would have a problem..i cant move my 55" tv with my own car..i would have to ask some friends to help me twice..i would like to avoid that if possible..
what can sectroyer maybe do about this problem?
i allready wrote him, and until he writes back i will try that 30-100 area wish me luck guys

arg thats really a pain in the ass guys
everytime the TV crashes i can hear the aliens talking via the TV speakers
very weird sounds, really!

[blendstylez]

SpoilerShow

Code: Select all

 Connecting to 192.168.1.14:21 .. Success
 Querying recordings on TV ...
 Debug Code: 0x00011001 ---> No content on "sda1"
 Verifying telnet access to 192.168.1.14:23 .. Success
 All recordings on USB listed. Waiting for user.
 Connecting to 192.168.1.14:21 .. Success
 Querying recordings on TV ...
 Debug Code: 0x00011001 ---> No content on "sda1"
 Debug Code: 0x00011001 ---> No content on "sdc"
 Verifying telnet access to 192.168.1.14:23 .. Success
 All recordings on USB listed. Waiting for user.
 Connecting to 192.168.1.14:21 .. Success
 Querying recordings on TV ...
 Debug Code: 0x00011001 ---> No content on "sda1"
 Debug Code: 0x00011001 ---> No content on "sdc"
 Verifying telnet access to 192.168.1.14:23 .. Success
 All recordings on USB listed. Waiting for user.
 Connecting to 192.168.1.14:21 .. Success
 Querying recordings on TV ...
 Debug Code: 0x00011001 ---> No content on "sda1"
 Debug Code: 0x00011001 ---> No content on "sdc"
 Verifying telnet access to 192.168.1.14:23 .. Success
 All recordings on USB listed. Waiting for user.
 Examining DRM-ststus of the recording ..
 Recording is "forced" into DRM protected mode.
 Uploading decoder library to TV
 Removing any old work log
 Debug Code: 0x00011015
 Starting the decoding process on TV
 Debug Code: 0x00010A38
 Debug Code: 0x00013639
 There was an error performing Telnet command .. Cannot continue.
 Process FAILED somewhere down the road for 20151118191608.srf.
 Debug Code: 0x00010E09
 No recordings found. Waiting for user.
 Debug Code: 0x00010A91
 GetUSBInfo "Client lost connection"
 Debug Code: 0x00010B92
 Failed to disconnect from FTP..
 Connecting to 192.168.1.14:21 .. (1/100)
 GetUSBInfo FAILED to Reconnect ..
 Debug Code: 0x00010A92
 Operation finished .. Waiting for user..

Lordbyte this is a different log isn't it?

does this:
Starting the decoding process on TV
Debug Code: 0x00010A38
Debug Code: 0x00013639
There was an error performing Telnet command .. Cannot continue.

give u a clue what is going on?

i just read through 30 pages of this thread, and i would be happy if just one recording did successfully transfered to my pc
magic value 1 or 10 does not make any difference..as well as about ~70 other values i tried
i ve tried so much toggles, different magic values...everytime i have to power cycle my H6600
i am losing my faith

[Lordbyte]

Debug Code: 0x00010A38 ---> The PVRDecoder FTP client have failed to retrieve current folder from TV (You have been disconnected).
If plugin crashed TV this is to be expected.

Debug Code: 0x00013639 ---> The PVRDecoder recieve no responce when issuing a Telnet-command (You have been disconnected).
If plugin crashed TV this is to be expected.

You seem to be very unlucky. As I understand it basically everybody DOES get it running ..

We might persue another angle. The protocol used to "extort" stream-information from the TV involves a race-condition.
Some H-models simply perform too bad to avoid a buffer-underrrun, and on those models you need to "serialize" the operation,
again in SETTINGS --> OTHER

Sorry for your bad experience. You are the only user that I (currently) know of, that has problems of this magnitude.

BR
LordByte

[blendstylez]

if you mean the serialization, i allready tried this toggle..result was the same..
and as a side info, same network - same computer - another tv - H6500 works just fine..

why did my tv do 50 tests late at night without crashing one time..and today it crashes every freaking time? what do i overlook??
can u tell me how all other toggles should be set beside the magic value?
maybe one wrong set toggle is the cause

[Lordbyte]

Two different days, two diferent memory-maps in TV .. Apps you may have loaded, functions you may have used,
network fidelity, and the current distance between the earth and the moon .. All part of the equation.

I will repeat though, it seems that others DO find their value, and from that point on things run smooth.
But it seems that your "window" af "good" values are both narrow, and not within "normal" range ..

Its not exactly a well defiened science yet


Re-root TV and verify "clean" FTP and Telnet ... and try try again

Sorry man

[blendstylez]

even if its a lil offtopic, how do i reroot or better dismiss the root to start from scratch?
and once more thx for your advice!!

[sectroyer]

what can sectroyer maybe do about this problem?
i allready wrote him, and until he writes back i will try that 30-100 area wish me luck guys

I already replied. if you have problems try value of 1

[blendstylez]

i did as i told u as well!
result stays the same!

[sectroyer]

i did as i told u as well!
result stays the same!

If it doesn't work with ANY value from 1 till 10. I don't think it will work at all Are you trying on same file or on different files ?

[blendstylez]

i switched between two files but most of the time with the same one

but im not sure if my rooting procedure was very clean because i did a downgrade from a hanging firmware to a stable firmware, and hadn't to root again..did left a unsure feeling on my side..thats the only thing i can imagine what could be the cause..im clueless :/