[How-To] Hacking C series TV. Models with Internet@TV only

[erdem_ua]

You can try. Look this post from solevi. You can use data cable from cell phone (don`t connect TV directly to com port of PC!), or you can solder by yourself:

It's a simple RS232 level shifter from TTL to RS232. Instead of that, using USB-to-RS232 cable is better alternative. PL2303 chips are supporting TTL level input I use them. You can also use your Arduinos RX and TX pins using "BaseSimple" example on arduino program (I mean if arduino program not used RS232, you can use it's RX and TX pins)

[juusso]

data cable from samsung E-730 works fine.

Busybox from timoo did not work at all. Another busybox was compiled by card2000, telnet connected, but disconnect immediately. here is the log:

Code: Select all

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2010.10.29 00:19:21 =~=~=~=~=~=~=~=~=~=~=~=
Event Log: Appending session log (SSH packets mode) to file: putty.log
Event Log: Looking up host "192.168.11.3"
Event Log: Connecting to 192.168.11.3 port 23
Event Log: client:	WILL NAWS
Event Log: client:	WILL TSPEED
Event Log: client:	WILL TTYPE
Event Log: client:	WILL NEW_ENVIRON
Event Log: client:	DO ECHO
Event Log: client:	WILL SGA
Event Log: client:	DO SGA
Event Log: server:	DO ECHO
Event Log: client:	WONT ECHO
Event Log: server:	DO NAWS
Event Log: client:	SB NAWS 80,24
Event Log: server:	WILL ECHO
Event Log: server:	WILL SGA

The config for compiling

Anybody has an idea why? Maybe configuration options are wrong?

[bastler0815]

Hi there,

anybody tested the C 6XXX series in fact of serial output with the VGA connector ?

I have build a TTL converter but so far no time to test ... probably I?ll have some time this afternoon/evenig for testing

Regards

[timoo]

data cable from samsung E-730 works fine.

Busybox from timoo did not work at all. Another busybox was compiled by card2000, telnet connected, but disconnect immediately. here is the log:
[

wheres you tested it? it is for arm,what errors ? did you make ln -s busybox telnetd chmod 744 telnetd ? make ./telnetd 2>& error.txt and send me , i cant upload mtd_rwarea/usb_mount/usb_hotplug.sh something i do wrong

[juusso]

timoo, i edited links. There was an encoding problem in hack files. Pls download again and everything should be ok. Off course we didn`t set any chmod, we will check on Le650. Tx.

If you still have errors, try modify files manualy as in examples. You can download untouched widget from here

[timoo]

imho telnetd need login make symlink ln -s busybox login

[juusso]

Mega news!

We have got telnet console working on C650. I added the information to the first post. Congratulations

[erdem_ua]

Does it rooted? Does we have telnetd on C series???? Yiihaaa
Needed to add entry on twitter.
Also will call media to stop their printing press.They will needed to change front page

[juusso]

Yes, it`s rooted. Fully functional console via telnet. I added info to the first post.

[arris69]

hi,

can pls. somebody try some kernel modules?
http://stb.zsolttech.com/SamyGO-OE.dev/ ... use-module
http://stb.zsolttech.com/SamyGO-OE.dev/ ... odule-cifs

i think 7zip can handle the ipk files than modules are in extracted data.tar.gz archive

if modules won't load pls check the output of dmesg

thnx
arris