.
I'm trying to unbrick my samsung TV UE40D5700. This one is bricked since a firmware upgrade. The behaviour is that my TV reboot systematically just after the Smart TV screen appears.
I tried to follow the numerous discussions/tutorials I found over the SamyGo website and the web but I didn't succeed to unbrick it.
Currently, I'm trying to unlock my serial console with the code for my TV (1198282), but console is still locked.
Here is the logs of the console:
Code: Select all
Switch to Earphone UART
SEC
Switch to Micom UART
=================================
onboot (Jan 16 2011 - 10:33:08)
release ver : 1001
etc :
=================================
Onboot X6 Sync mode
LCD FastLogo Run...
Loading Kernel....
load kernel start, size : 131072 + 4194304 byte
Jump Kernel....
auth success by h/w sha1 UART1 is used to UART or logic mode.
L2 Cache Initialization Finished
L2 enabled line size: 64 bytes write back(cache)
Linux version 2.6.30.9 (kerino@sp2) (gcc version 4.3.3 (VDLinux 1.1.x MIPS 2010-02-13) ) #80 PREEMPT Fri Jan 14 20:15:13 KST 2011
LINUX started...
boot_command_line: console=tty1,115200 root=/dev/tfsr6 rootfstype=squashfs LX_MEM=0x4630000 LX_MEM2=0x63E00000,0xC200000 SELP_ENABLE=1198282
LX_MEM = 0x0, 0x4630000
LX_MEM2 = 0x63E00000, 0xC200000
CPHYSADDR(PFN_ALIGN(&_end))= 0x4CD000
EMAC_LEN= 0x100000
DRAM_LEN= 0x0
console [early0] enabled
CPU revision is: 00019555 (MIPS 34Kc)
FPU revision is: 01739300
Begin Mstar_Chip_setup
Determined physical RAM map:
memory: 04630000 @ 00000000 (usable)
memory: 0c200000 @ 63e00000 (usable)
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00020000
HighMem 0x00020000 -> 0x00070000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x00004630
0: 0x00063e00 -> 0x00070000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64048
Kernel command line: console=tty1,115200 root=/dev/tfsr6 rootfstype=squashfs LX_MEM=0x4630000 LX_MEM2=0x63E00000,0xC200000 SELP_ENABLE=1198282
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=000570fe
Readback ErrCtl register=000570fe
NR_IRQS:256
PID hash table entries: 512 (order: 9, 2048 bytes)
CPU freq count = 336000000
CPU frequency 672.00 MHz
Console: colour dummy device 80x25
console handover: boot [early0] -> real [tty1]
Do you have any idea? My TV is definitely bricked?
Thank you.
