[ROOT] H "Network" root (FW<=Oct.2015, no T-GFS)

[sectroyer]

What problem do not even know myself a novice here.

But there is something else !, I'm doing?

You did not read carefully first post and did NOT attach log files correctly good luck:)

[dcsmc]

Well I will try again, Thank you very much. Sorry that I have such great images, honestly I don't know how to make them smaller))))

[dcsmc]

please explain the need for 2 drives? 1 for recording other for root data? I have problems with the translation. Translated literally. Explain how to do this?

[sectroyer]

Well I will try again, Thank you very much. Sorry that I have such great images, honestly I don't know how to make them smaller))))

I noticed you have problem "with translation". You talk about IMAGES, I talk about LOG FILES Concentrate

please explain the need for 2 drives? 1 for recording other for root data? I have problems with the translation. Translated literally. Explain how to do this?

Yes, two to start than you can use less

[SterkeJerke]

Below should be all info that's needed.
I can not seem to connect using telnet on 3123 or ftp....
Must be overlooking something

(Did a nmap scan..... Nothing open)


Can I downgrade to 0000.0 install another software and redo procedure?
T-MST14DEUC on 2781

SpoilerShow

IMG_2984.JPG

Code: Select all

echo " insmod_qca.sh begin"
insmod /mtd_cmmlib/WIFI_LIB/QCA/cfg80211.ko
insmod /mtd_cmmlib/WIFI_LIB/QCA/ath6kl_usb.ko ath6kl_p2p=0x19 debug_quirks=0x200 reg_domain=0x7
echo " insmod_qca.sh end"

Code: Select all

+ /bin/sleep 30
+ /dtv/bin/ls
Terminated
+ [ 143 -eq 143 ]
+ echo SFD detected. Insmoding...
SFD detected. Insmoding...
+ /bin/cp /dtv/usb/sdb1/SamyGO/antysfd.ko /tmp/
+ /bin/cp /dtv/usb/sdb1/SamyGO/ntkfree /tmp/
+ /sbin/insmod /tmp/antysfd.ko
+ [ 0 -ne 0 ]
+ /bin/dmesg
+ /bin/busybox grep anty
 [antysfd] loaded
 [antysfd] security_ops: 0xc0373130
 [antysfd] sfd_mmap_file_hook: 0xbe4bf884
 [antysfd] close: 0xc00b83f4
 [antysfd] open: 0xbe4becb8
 [antysfd] Starting sfd_uep_check_elf_file search at: 0xbe4becb8
 [antysfd] found DMB SY at: 0xbe4bf7d8
 [antysfd] branch sfd_uep_check_elf_file: 0xbe4bf7f0
 [antysfd] sfd_uep_check_elf_file: 0xbe4b5384
 [antysfd] Patching sfd.ko successful!!!
antysfd mod ld
+ chmod +x /tmp/ntkfree
+ mknod /dtv/ntkaxis c 140 0
+ /tmp/ntkfree
open failed
+ cp /dtv/usb/sdb1/SamyGO/samyGOso /tmp/
cp: can't stat '/dtv/usb/sdb1/SamyGO/samyGOso': No such file or directory
+ cp /dtv/usb/sdb1/SamyGO/libNetSwitch.so /tmp/
cp: can't stat '/dtv/usb/sdb1/SamyGO/libNetSwitch.so': No such file or directory
+ chmod +x /tmp/samyGOso
chmod: /tmp/samyGOso: No such file or directory
+ /tmp/samyGOso -d -A -r -l /tmp/libNetSwitch.so WIRED
/dtv/usb/sdb1/SamyGO/lan.sh: line 5: /tmp/samyGOso: not found
+ echo checking /dtv/usb/sdb1
checking /dtv/usb/sdb1
+ /bin/sleep 1
+ [ -e /dtv/usb/sdb1/STOP_SAMYGO ]
+ cd /tmp
+ mkdir /tmp/bin
+ echo OK
+ [ -e /dtv/qcm_samygo ]
+ touch /dtv/qcm_samygo
+ cp /dtv/usb/sdb1/SamyGO/samygo_telnetd /dtv/
+ chmod +x /dtv/samygo_telnetd
+ cp /dtv/usb/sdb1/SamyGO/busybox /tmp/bin/+ 
/dtv/samygo_telnetd 33
Starting simple telnet server
Socket created
bind done
Waiting for incoming connections...
+ chmod +x /tmp/bin/busybox
+ /tmp/bin/busybox --install -s /tmp/bin
+ sync
+ export PATH=/tmp/bin:/dtv/bin:/usr/sbin:/usr/bin:/bin:/sbin:/etc/Scripts:/util
+ export LD_LIBRARY_PATH=/tmp/bin:/dtv/bin:/lib
+ sync
+ sync
+ /tmp/bin/busybox tcpsvd -vE 0.0.0.0 21 /tmp/bin/busybox ftpd -w /
tcpsvd: listening on 0.0.0.0:21, starting
+ ln -s /dev/loop3 /tmp/loopnone
+ sync
+ [ -e /dtv/usb/sdb1/SamyGO/newvdfs.img ]
+ /tmp/bin/busybox losetup /tmp/loopnone /dtv/usb/sdb1/SamyGO/samyext4.img
+ /tmp/bin/busybox mount -t ext4 -o sync,exec /tmp/loopnone /mnt
+ /tmp/bin/busybox --install -s /mnt/bin
+ sync
+ rm /mnt/sam.log
+ ls -la /mnt/bin /mnt/doc /mnt/etc /mnt/firmware /mnt/lib /mnt/lost+found /mnt/mc /mnt/opt /mnt/rcSGO /mnt/samygo.log /mnt/sbin /mnt/src /mnt/usr /mnt/var
+ echo ===========================
+ echo Starting rcSGO from run1.sh
+ echo ===========================
+ /mnt/bin/busybox2 sh -x /mnt/rcSGO /mnt

Vermagic.txt

Code: Select all

0135, product SMP preempt mod_unload ARMv7 

patch.bat log

Code: Select all

Searching for vermagic postion. Please wait...
Found vermagic at: 1329
Vermagic patch position is: 1338
File size is 43
Zero position is 1381
Vermagic is:
0135, product SMP preempt mod_unload ARMv7
rawwrite dd for windows version 0.6beta3.
Written by John Newbigin <jn@it.swin.edu.au>
This program is covered by terms of the GPL Version 2.

notrunc
43+0 records in
43+0 records out
rawwrite dd for windows version 0.6beta3.
Written by John Newbigin <jn@it.swin.edu.au>
This program is covered by terms of the GPL Version 2.

notrunc
1+0 records in
1+0 records out
Press any key to continue . . .

[sectroyer]

Rename data_0x7.zip to data.zip and re-root

[SterkeJerke]

Rename data_0x7.zip to data.zip and re-root

Thx.... But at what step do I start? InstallSamyGO-H?

• Unpack attached SamyGO.zip to FAT USB
  Unpack attached InstallSamyGO-H.zip to FAT USB
  Download samyext4.zip from HERE (Afbeelding 25/09/2015)
  Unpack samyext4.img and copy it to SamyGO directory on FAT USB
  Now you should have FAT USB with two folders: InstallSamyGO-H and SamyGO
  Connect USB to TV
  Launch ONLY ONCE InstallSamyGO-H from SmartHub (if it doesn't appear reboot TV). Sometimes it is necessary to connect USB WHILE TV IS OFF!!! Remember to MAKE A PHOTO of rooting app log!!!
  Press enter when you're asked, the widget will automatically finish installation then.
  When it finishes it will ask to reboot TV.
  Reboot TV and wait 5 minutes.
  Power OFF TV and UNPLUG USB.
  On PC check USB. You should see following files:
  insmod_qca.sh OR insmod_bcm.sh
  network_type_info.txt
  wifi_vendor.txt
  SamyGO/vermagic.txt (in some cases you might NOT see this file but if root is working do NOT worry )
  Make a backup of those files, they WILL CHANGE AFTER NEXT BOOT and you WILL NEED THEM LATER!!!
  Double click patch.bat (Linux/Unix/Mac OS X users should use patch.sh) wait for it to finish and make print screen of output.
  Connect USB to TV
  Power ON TV and wait 5 minutes.
  Now SamyGO is started and telnet/ftp/etc. should work.
  If you have ANY problems please attach rooting app log photo AND PASTE FULL log(s) (insmod_*.sh, sam.log, vermagic.txt and patch.bat log) to "spoiler"/"code" bbcodes or provide a link to pasted file(s) on http://ctrlv.it/. Otherwise "NO HELP"!!! Please do NOT attach log files directly OR zip them!!!

[sectroyer]

First one

[sergey81]

Hello, tv UE40H6230AK problem with Root as the user dcsmc after shutdown does not work root.
insmod_qca.sh

SpoilerShow

• echo " insmod_qca.sh begin"
  insmod /mtd_cmmlib/WIFI_LIB/QCA/cfg80211.ko
  insmod /mtd_cmmlib/WIFI_LIB/QCA/ath6kl_usb.ko ath6kl_p2p=0x19 debug_quirks=0x200 reg_domain=0x16
  echo " insmod_qca.sh end"

vermagic.txt

SpoilerShow

• 0135, product SMP preempt mod_unload ARMv7

[dar3k]

I have rooted my new 55hu8500 (T-GFP9DEUC 1232), but I have one issue, when I'm switching on my TV, I mustn't touch any key on RC till root will boot, otherwise root not boot. For example when I switched on my TV, and I did something on it after switched, although click OK to confirm pop up about camera hiden, root not came!

Whether someone have the same problem, how to solve it?

PS: Someone rooted GFP9DEUC by Skype - I tried but not working