exlink cable

[howy121]

hi any one tell me if this cable is any good to use as exlink cable

http://www.avitresearch.co.uk/usb2ttl_silab.htm

[howy121]

hi ive connected my exlink cable up but thats all im getting is this wont let me do any thing

[ERROR][Drv_IIC_RW_Chelsea():871] requested sub addr : 0x0
[ERROR][Drv_IIC_RW_Chelsea():878] requested byte count : 2

>>[ERR:FRCQShare.cpp] t_FRCQ_Panel_FRCQ_Init():24013 [QQQQQQQQQQQ]FRCQ C
heck NG!!

FRCQ is NOT DETECTED !!!!

6 Series t_FRCS_ExistCheck ...[NONE] line:10701

>>[ERR:FRCSShare.cpp] t_FRCS_Panel_FRCS_Init():12995 # FRCS doesn't exis
t, Pass Init #


>>[ERR:FRCSShare.cpp] t_FRCS_Panel_ResetMajorFWCmd():13015 FRCS is NOT D
ETECTED !!!!


6 Series t_FRC200_ExistCheck ...[NONE] line:591

>>[ERR:FRC200Share.cpp] t_FRC200_Panel_FRC200_Init():1582 # FRC200 doesn
't i2c_master_comb_read: I2C ERR: port 0 comb read error ================
i2c_master_comb_read: I2C ERR: slave dev 0xca ================
i2c_master_comb_read: I2C ERR: slave not exist or =============
i2c_master_comb_read: I2C ERR: sub address not ack ================
sdp_i2c_ioctl: i2c device start byte not ack
exist, Pass Init #


>>[ERR:FRC200Share.cpp] t_FRC200_Pai2c_master_comb_read: I2C ERR: port 0
comb read error ================
nel_ResetMajorFi2c_master_comb_read: I2C ERR: slave dev 0xca ================
i2c_master_comb_read: I2C ERR: slave not exist or =============
i2c_master_comb_read: I2C ERR: sub address not ack ================
WCmd():1496 FRCsdp_i2c_ioctl: i2c device start byte not ack
200 is NOT DETECTED !!!!

i2c_master_comb_read: I2C ERR: port 0 comb read error ================
i2c_master_comb_read: I2C ERR: slave dev 0xca ================


>>[ERR:TDsFi2c_master_comb_read: I2C ERR: slave not exist or ===========
==
i2c_master_comb_read: I2C ERR: sub address not ack ================
RC200Panel.cpp]sdp_i2c_ioctl: i2c device start byte not ack
Create():70 FRC200 Init Error~!

LocalDimming init Error!!
DevLdAsic_Init <IN>
LD is not supported in (LC650)
Local Dimming Initialize FAIL!!
DevLdAsic_Init <OUT> m_bFlagCreate:1, ret:-2

>>[ERR:TDsLocalDimmingPanel.cpp] Create():1344 LDAsic Init Error~!

CheckExist3D_IC: 3D is not supported !!!
t_N240_WriteFactoryVer Success
INIT_LVDS_POWER_CONTROL - DOWN [Valencia]
INIT_LVDS_POWER_CONTROL - [LD] is Not Supported.

>>[ERR:TDcValenciaI2C.cpp] Create():112 Already Create...

[ERROR][Drv_IIC_RW_Chelsea():859] i2c read operation failed
[ERROR][Drv_IIC_RW_Chelsea():860] requested channel : 0
[ERROR][Drv_IIC_RW_Chelsea():861] requested chip id : 0xca
[ERROR][Drv_IIC_RW_Chelsea():875] requested sub addr : 0x0ec
[ERROR][Drv_IIC_RW_Chelsea():878] requested byte count : 2
[ERROR][Drv_IIC_RW_Chelsea():859] i2c read operation failed
[ERROR][Drv_IIC_RW_Chelsea():860] requested channel : 0
[ERROR][Drv_IIC_RW_Chelsea():861] requested chip id : 0xca
[ERROR][Drv_IIC_RW_Chelsea():875] requested sub addr : 0x0ec
[ERROR][Drv_IIC_RW_Chelsea():878] requested byte count : 2
[ERROR][Drv_IIC_RW_Chelsea():859] i2c read operation failed
[i2c_master_write: I2C ERR: port 0 write error ================
i2c_master_write: I2C ERR: slave dev 0x90 ================
i2c_master_write: I2C ERR: error status 0x81================
sdp_i2c_ioctl: i2c device start byte not ack
ERROR][Drv_IIC_RW_Chelsea():860] requested channel : 0
[ERROR][Drv_IIC_RW_Chelsea():861] requested chip id : 0xca
[ERROR][Drv_IIC_RW_Chelsea():875] requested sub addr : 0x0ec
[ERROR][Drv_IIC_RW_Chelsea():878] requested byte count : 2

>>[ERR:READShare.cpp] m_READ_READING2_Read2IIC():2496 [READING2] addr =
0x00ec Read fails

??????????????????t_READ_Check : [E_FRC_TYPE_READ_120] ?????????????????????????
?????
[ERROR][Drv_IIC_RW_Chelsea():859] i2c write operation failed
[ERROR][Drv_IIC_RW_Chelsea():860] requested channel : 0
[ERROR][Drv_IIC_RW_Chelsea():861] requested chip id : 0x90
[ERROR][Drv_IIC_RW_Chelsea():871] requested sub addr : 0x0
[ERROR][Drv_IIC_RW_Chelsea():878] requested byte count : 0
t_READ_Sensor_Temp_CheckExist(): Sensor NOT Available!
############# [READING] ETC_50Hz############
Cabinet Type : T_R_BLK [583]
m_CalculateType= 1
m_SensorGain= 16
m_fConstant[0]= 6630.000000
m_fConstant[1]= 1.973000
m_fConstant[2]= 0.046729
m_fConstant[3]= 0.070100
Brightness Sensor is OK!!!
INIT_LVDS_POWER_CONTROL - UP [Valencia]
INIT_LVDS_POWER_CONTROL - [LD] is Not Supported.
## Panel : 26, Model : 11
### eSrc 0x0, Audio Format [Not Support String 0], DDCompMode RF, Factory value
-9, Real set value to SDAL 0
[BootFromMicom]Get Boot Status : 1
[BootFromMicom]Get Master Power Reset : [0]
School Volume eOutType : 0, Volume : 4
School Volume eOutType : 0, Volume : 0
>>> t_PlayMelody 0
FBInfo.Validation = 1
FBInfo.ChannelStatus = 1
FBInfo.SourceID = 53
FBInfo.SourceMode = 513
FBInfo.AudioDescriptionID = 65535, AudioType = 65535
>>> t_GetFastBootInfo 0
-------------------------------------------
=== Selected Tuner on Factory : 3 th !!! ===
-------------------------------------------
Called... t_ExistCheck_TEA6425 = 1....(Analog_Video_Switch_IC)
CCreator::createExtIn(): bIs6425Exist : 1
CCreator::createExtIn(): bIs6425Exist : 1
CCreator::createExtIn(): bIs6425Exist : 1
CCreator::createExtIn(): bIs6425Exist : 1
CCreator::createExtIn(): bIs6425Exist : 1
CCreator::createExtIn(): bIs6425Exist : 1
Register value : 9287
???????? SiI9287 DETECTED !!!!!!!
?? SIL9287Monitor Create!
##### TDsSystem::SetDependence Mode [2]
[TDaSystem::ValenciaPivotModeConfig] PivotConfig Size [1920 * 1080], Mode [3]
[TDaScaler::GetInitVideoConfig] VideoConfig: 0x321
[TDaScaler::GetInitVideoConfig] Model:LC650 Valencia EvenFirst
[TDaScaler::GetInitVideoConfig] VideoConfig: 0x321 is already set.
[ Fast Boot ] [ Panel Control Type : 2 ]
################## Arsenal is Normal ##################
Arsenal Reg : 0x805, Val : 0x1601
>>> t_CheckSystemNormal 0
==== HDMI [SRC num :1], [ID: 0x47], [HP STATE: 0xf]
Set LNB Power!!! 1
[ Fast Boot ] [ Panel Control Type : 1 ]
m_stFRC200PanelResInfo.eRes [21]
m_stFRC200PanelResInfo.tSetResInfo.vFreq [50000]
[STEP1]TDsFRC200Panel::SetResolutionInfo
[STEP3]TDsFRC200Panel::SetResolutionInfo
[STEP4]TDsFRC200Panel::SetResolutionInfo
##### [FRC200] 50Hz 3D_OFF or GameON SET_50Hz #####
[STEP5]TDsFRC200Panel::SetResolutionInfo
eBootState 1, BootParam 0, HotelMode 1, ShopMode 0
>>> t_CheckFastBoot 1
============ CHECK FAST BOOT Exception ===========
====== Send Jack ID Command to SubMicom ! =====

>>[ERR:TDsLocalDimmingPanel.cpp] SetDependence():1470 Not Define Depende
nce !!!


>>[ERR:TDsREADPanel.cpp] SetDependence():207 Not Used...

SetPDPModulePower : ON, ret : 0
[ Fast Boot ] [ Panel Control Type : 3 ]
[ 61|7.462283] [MOIP_TRC] CMoIPStreamManager::CMoIPStreamManager() (218
7)


## Core Software Platform (TM) 1.1 : DTP-SP-0072 (RELEASE)
Copyright (C) SAMSUNG Electronics Co.,Ltd.


CSP No sched_yield()
TCMW::Initialize() start

ProfileManager::t_CompareMagicKey() line[572] Offset 0 Size 4]

ProfileManager::t_CompareMagicKey() line[580] CRC: 82250693, magicKey: 8225069
3
ProfileManager::Init() line[74] Mark 2080

[DEFAULT/Debugging] 0 : FlagHotelMode, hotelProductType[0]
[DEFAULT/Debugging] 1 : FlagUseHotelMixedMap, factoryMapUse[0]
[DEFAULT/Debugging] 2 : FlagHospitalMode[0]
[DEFAULT/Info] 3 : ####Reset TCTvManagerBase::Create####


GetTotalChMapPartition, Total mtd_rwarea Partition Size [24] MB[DEFAULT/Info] 4
: ####Reset Channel Magic Key ! old = 1001007 new = 1001007 !!!####


[M_TMS/Fatal] 5 : TCServiceProviderMemory::Load() => Couldn't create file /mtd_c
hmap/ServiceProviders

[M_TMS/Fatal] 6 : TCChSortModeDB::LoadSortMode Cannot Open File /mtd_chmap/ChSor
tMode

[DEFAULT/Fatal] 7 : TCWindowInfoManager_DVB::t_ChangeCountry (WindowId:1 TvMode
:0 Country:7,BroadCasterId :-1)
[DEFAULT/Fatal] 8 : TCWindowInfoManager_DVB::t_ChangeCountry (WindowId:2 TvMode
:0 Country:7,BroadCasterId :-1)
[DEFAULT/Fatal] 9 : TCWindowInfoManager_DVB::t_ChangeCountry (WindowId:3 TvMode
:0 Country:7,BroadCasterId :-1)
[DEFAULT/Info] 10 :



[DEFAULT/Info] 11 : [CI+ information] Make sure that this is DVB CI+ product.
[DEFAULT/Info] 12 : [CI+ information] Make sure that production certificates and
keys should used for this product.



[DEFAULT/Fatal] 13 : TCWindowInfoManager_DVB::t_ChangeCountry (WindowId:5 TvMod
e:0 Country:7,BroadCasterId :-1)
TCMW::Initialize() end
0 (4294967295): Shadow 2.1 (Release Version : DTP-BP-Shadow-0120-Release) is bei
ng initialized.
---[SPCSCREEN] : ChangeScreenRes() already screen0 resolution 960 * 540.
. return.
---[SPCSCREEN] : ChangeScreenRes() already screen0 resolution 960 * 540.
. return.
1 (4294967295): Initialize Cubic v1.0.57

################################
t_InitializeComponentsProfile
################################


[DTVInputService::t_Create] m_nKeyInputTime = 8230



################################
t_InitComponents
################################SAMSUNG (R) Core SW Platform 2.0 for CSP 1.1
Copyright (C) SAMSUNG Electronics Co.,Ltd.

APP_INITIALIZE(); end

[DEFAULT/Debugging] 14 : MW Initilize Completed
[DEFAULT/Debugging] 15 : WaitForFastBoot End

>>[ERR:TDiSystem.cpp] GetDefaultColorSystem():1424 Null Fuction Call !!!
Must Check Implementation Code...

TPCTv::Power, ######## 3 ######## Param : 0
School Volume eOutType : 0, Volume : 4
sdp GMAC 10/100M network driver ver 0.956
=================[SDP GMAC]GMAC remap is 0xdd87e000
=================================
------------------- NORMA[SDP GMAC]DMA remap is 0xdd98e000
L MODE --------[SDP GMAC]Find SDP GMAC ver 1034
----------
===realtek 8201E found 3
===============[SDP GMAC]DMA reset is release(normal status)
================================
[SDP GMAC]eth0: Ethernet address e4:e0:c5:80:b9:ed
TPCTv::Power, Return Value Check : 1
[SDP GMAC]eth0: IRQ is 15
[SDP GMAC]Find PHY. PHY ID: 001cc815
[AP_FRONTRUNNER/Fatal] 16 : [t_Create][line:173] Wired Module Loaded...

[SSL_library_init] Initializing...
[SSL_library_init] already intialized...
### eSrc 0x0, Audio Format [Not Support String 0], DDCompMode RF, Factory value
-9, Real set value to SDAL 0
[DevMgr/Fatal] 17 : [GetInstance:137] Device Manager START...
==================================================
--------------- NORMAL MODE COMPLETE--------------
==================================================
System proccess >>>>> [ SYSTEM_READY ]
[AP_FRONTRUNNER/Fatal] 18 : [t_Create][line:183] DeviceManager Created...

[DevMgr/Fatal] 19 : [t_OnEvent:304] DeviceManager::MESSAGE_FLASH_INFO_UPDATED :
DeviceKEY(1), DeviceID(0)
[Is Reading] reading:1, Channel:0, slave addr:[0xCC][0x0]
Start System Monitor -> Reading:1, Channel:0x0, Slave_addr:[0xCC][0x0]
==================== DCDsmManager pid = 61


============>TDaShare::m_StreamPath:1



>>[ERR:TDiMpeg.cpp] InstallVideoCallbackFrameCapture():963 Null Fuction
Call !!!Must Check Implementation Code...

[TPAWindow.cpp][ConnectSource][WID:0][CALL]..
TDResolution_k : [21]
TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [50000], [1], [0],
[0], [0], [0], [0], [10], [0], [513]
GetConnectionConfig eSrc : [0201]
Source : 0x201 Window Type : 0 Back End Decoder Type : 8, tdRet=0
### eSrc 0x201, Audio Format [TD_AUDIO_FORMAT_RA_LOSSLESS], DDCompMode RF, Facto
ry value -9, Real set value to SDAL -144
[TPAWindow.cpp][ConnectSource][WID:0][END]..
[ERROR][hdiAllocDec():2304] Video Format is Error 0x0
[ERROR][hdiAllocDec():2311] Decoder alloc fail
[ERROR][SdAVDec_VideoStart():709] <Out> Allocate VideoDecoder failed

>>[ERR:TDsValenciaMpeg.cpp] StartVideoDecoding():405 - SDAL ERROR [-1]
!!!

[ERROR][StartAudio():301] PLAY ENGINE FAIL

>>[ERR:TDsValenciaMpeg.cpp] StartAudioDecoding():461 - SDAL ERROR [-2]
!!!

[ERROR][StopPcr():504]

!

PCR is already stopped!! [TPAWindow.cpp][ConnectSource][WID:3][CALL].. TDResolution_k : [21] TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [50000], [1], [0], [0], [0], [0], [0], [10], [0], [513] Source : 0x201 Window Type : 3 Back End Decoder Type : 8, tdRet=0 [TPAWindow.cpp][ConnectSource][WID:3][END].. [DEFAULT/Debugging] 20 : [t_OnSystemReady:5819] First, Display Channel Banner St art(8730) [DEFAULT/Debugging] 21 : [t_OnSystemReady:5830] First, Display Channel Banner En d(8780) [NETWORK_MIDDLE] NetworkManager [NETWORK_MIDDLE] Create NetworkDB::GetInstance() NetworkDB() NetworkDeviceMonitor::GetInstance() NetworkDHCPMonitor::GetInstance() [NETWORK_MIDDLE] NetworkEventManager::GetInstance() [NETWORK_MIDDLE] New NetworkEventManager() -> Success [NETWORK_MIDDLE] NetworkEventManager::Create() [NETWORK_MIDDLE] NetworkEventManager::Create() m_Mutex.Create Success [NETWORK_MIDDLE] NetworkEventManager::Create() ->Success [NETWORK_MIDDLE] NetworkEventManager::GetInstance() [NETWORK_MIDDLE] Already created... [NETWORK_MIDDLE] NetworkEventManager::GetInstance() [NETWORK_MIDDLE] Already created... [NETWORK_MIDDLE] NetworkEventManager::GetInstance() [NETWORK_MIDDLE] Already created... [NETWORK_MIDDLE] NetworkEventManager::GetInstance() [NETWORK_MIDDLE] Already created... NetworkDeviceMonitor::GetInstance() Already created... ######## CreateNetworkManager [ StartDeviceMonitoring ]###### [NETWORK_MIDDLE] NetworkEventManager::GetInstance() [NETWORK_MIDDLE] Already created... [NETWORK_MIDDLE] NetworkEventManager::GetInstance() [NETWORK_MIDDLE] Already created... [NETWORK_MIDDLE] NetworkEventManager::GetInstance() [NETWORK_MIDDLE] Already created... [PvrAppDrm] t_Main is processing UPnP_ERR:: DLNA: DLNA UPnP_CD_RegisterCallback(dmr/SamsungMRDesc.xml) --> h andle [0] UPnP_ERR::UPnPReadXmlDoc() error : fopen for read [/mtd_rwarea/dlna_web_root//Dm rAclConfig.xml] UPnP_ERR:: DLNA: DLNA UPnP_CD_RegisterCallback(pmr/PersonalMessageReceiver. xml) --> handle [1] UPnP_ERR::UPnPReadXmlDoc() error : fopen for read [/mtd_rwarea/dlna_web_root/Pmr AclConfig.xml] ++++++++ [CCPTvUtil:GetModelCode:24] ModelCode:TV-40C650 UPnP_ERR::[dlna at 0] addinfo@[] cpSendMSearch with no ipaddr, currently ignore this ++++++++ [CCPTvUtil:GetModelCode:24] ModelCode:TV-40C650 UPnP_ERR::[dlna at 0] addinfo@[] cpSendMSearch with no ipaddr, currently ignore this [NETWORK_MIDDLE] NetworkEventManager::GetInstance() [NETWORK_MIDDLE] Already created... [NETWORK_MIDDLE] NetworkEventManager::GetInstance() [NETWORK_MIDDLE] Already created... UPnP_ERR:: DLNA: DLNA UPnP_CD_RegisterCallback(/ruis/RemoteUIServerDescLeve l1.xml) --> handle [2] UPnP_ERR::UPnPReadXmlDoc() error : fopen for read [/mtd_rwarea/dlna_web_root/Rui sAclConfig.xml] bool checkFilesState(const char*) XML files are good UPnP_ERR:: DLNA: DLNA UPnP_CD_RegisterCallback(rcr/RemoteControlReceiver.xm l) --> handle [3] UPnP_ERR::UPnPReadXmlDoc() error : fopen for read [/mtd_rwarea/dlna_web_root/Rcr AclConfig.xml] [NETWORK_MIDDLE] NetworkEventManager::GetInstance() [NETWORK_MIDDLE] Already created... [NETWORK_MIDDLE] NetworkEventManager::GetInstance() [NETWORK_MIDDLE] Already created... [NETWORK_MIDDLE] NetworkEventManager::GetInstance() [NETWORK_MIDDLE] Already created... [NETWORK_MIDDLE] NetworkEventManager::GetInstance() [NETWORK_MIDDLE] Already created... [NETWORK_MIDDLE] NetworkEventManager::GetInstance() [NETWORK_MIDDLE] Already created... [NETWORK_MIDDLE] NetworkEventManager::GetInstance() [NETWORK_MIDDLE] Already created... [ 61|9.698142] [MOIP_TRC] bool CMoIPMain::Create() (352) [ 61|9.882566] [MOIP_TRC] bool CMoIPMain::InitApplication() (490) [ 61|9.883504] MK: Loading Skyhost... [NETWORK_MIDDLE] NetworkManager::AddConnection [eth0] NetworkDB::GetInstance() Already created... [NETWORK_ERROR ] file path = /mtd_rwarea/network_Wired_info not found. Initializ e the info file.... [NETWORK_ERROR ] file path = /mtd_rwarea/network_Wired_info not found. Initializ e the info file.... NetworkDHCPMonitor::GetInstance() Already created... [NETWORK_MIDDLE] ####### WiredConnection::Activate [ DevName : eth0 ] #####eth0: link down ## => Auto : ifconfig eth0 up [NETWORK_MIDDLE] Ethernet link UP Result [ 1 ] [NETWORK_MIDDLE] ---------->Activate IP_MODE_AUTO [NETWORK_MIDDLE] NetworkDHCPMonitor::SetDHCP Wired[eth0] [NETWORK_MIDDLE] ####### WiredConnection::Activate Success[ 1 ] ####### [NETWORK_MIDDLE] NetworkManager::AddConnection [Finished] [ERROR][StopPcr():504] ! PCR is already stopped!! [ERROR][StopPcr():504] ! PCR is already stopped!! [ERROR][StartAudio():301] PLAY ENGINE FAIL >>[ERR:TDsValenciaMpeg.cpp] StartAudioDecoding():461 - SDAL ERROR [-2] !!! TDResolution_k : [21] TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [50000], [1], [0], [0], [0], [0], [0], [10], [0], [513] #TDResolution_k : [21] #TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [50000], [1], [0] , [0], [0], [0], [0], [10], [0], [513] m_stFRC200PanelResInfo.eRes [21] m_stFRC200PanelResInfo.tSetResInfo.vFreq [50000] [STEP1]TDsFRC200Panel::SetResolutionInfo [STEP3]TDsFRC200Panel::SetResolutionInfo [STEP4]TDsFRC200Panel::SetResolutionInfo ##### [FRC200] 50Hz 3D_OFF or GameON --> Same 50hz setting, Pass~! ##### [STEP5]TDsFRC200Panel::SetResolutionInfo >>[ERR:TDsFRCQPanel.cpp] SetFactoryItem():394 Not support FactoryItem ui d =[320] [3D TEMPERATURE] >>[ERR:TDsFRCSPanel.cpp] SetFactoryItem():481 Not support FactoryItem ui d =[320] [3D TEMPERATURE] >>[ERR:TDsFRC200Panel.cpp] SetFactoryItem():437 Not support FactoryItem uid =[320] [3D TEMPERATURE] *****Game Mode OFF SkyHost Copyright (C) 2003-2008 Skype Technologies S.A. Proprietary and confidential, do not share this application. TDResolution_k : [21] TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [50000], [1], [0], [0], [0], [0], [0], [10], [0], [513] [ 61|12.034368] MK: DVB [AP_FRONTRUNNER/Fatal] 22 : [t_OnEvent][line:290] MESSAGE_APP_INITIALIZED receiv ed MESSAGE_APP_INITIALIZED~! not yahoo country [LoadUSBModules:1246] Start... [AP_SWU/Fatal] 23 : [GetFactoryVersion][line:4055] Factory MODEL : T-VALDEUC, Fa ctory MODULE : 003005, Factory DATE : 101124, Factory Original Version: 3005.1 insmod usbcore... [AP_SWU/Fatal] 24 : [IsDualBSP][line:1449] This is Dual BSP!!!!!!!!!!!!!!!!!! [AP_SWU/Fatal] 25 : [RecoverVersion][line:3857] LOC VERSION [SWU_T-VALDEUC_00300 5_I04_EK000DK000KK000RK000_101124 ] [AP_SWU/Fatal] 26 : [RecoverVersion][line:3858] NEW VERSION [SWU_T-VALDEUC_00300 5_I04_EK000DK000KK000RK000_101124 ] [AP_SWU/Fatal] 27 : [RecoverVersion][line:3867] Version is same. No Write insmod ehci_hcd... insmod ohci_hcd... insmod usb_storage... USB : Exit Load USB module... Elapsed Time:640msec. [AP_FRONTRUNNER/Fatal] 28 : [t_OnEvent][line:300] USB Module Loaded... NetworkDB::GetInstance() Already created... [NETWORK_SUBSYS] [LoadWirelessStaModule, 2794] insmod rt3572sta.ko ... [NETWORK_MIDDLE] NetworkEventManager::GetInstance() [NETWORK_MIDDLE] Already created... [NETWORK_MIDDLE] NetworkEventManager::t_OnEvent() [NETWORK_MIDDLE] [NetworkEventManager::t_OnEvent()] NetworkCommon::EVENT_NET_WIR ELESS_MODULE_INSMOD_COMPLETE [AP_FRONTRUNNER/Fatal] 29 : [t_OnEvent][line:313] Wireless Module Loaded... Player Recieve Event:[5326] !!! Player Recieve Event:[5326] !!! Player Recieve Event:[5326] !!! Player Recieve Event:[5326] !!! Player Recieve Event:[5326] !!! Player Recieve Event:[5326] !!! Player Recieve Event:[5326] !!! Player Recieve Event:[5326] !!! Player Recieve Event:[5326] !!! Player Recieve Event:[5326] !!! Player Recieve Event:[5326] !!! Player Recieve Event:[5326] !!! Player Recieve Event:[5326] !!! Player Recieve Event:[5326] !!! Player Recieve Event:[5326] !!! Player Recieve Event:[5326] !!! Player Recieve Event:[5326] !!! Player Recieve Event:[5326] !!! Player Recieve Event:[5326] !!! Player Recieve Event:[5326] !!! Player Recieve Event:[5326] !!! [DevMgr/Fatal] 30 : [t_OnEvent:304] DeviceManager::MESSAGE_FLASH_INFO_UPDATED : DeviceKEY(1), DeviceID(0) [AP_FRONTRUNNER/Fatal] 31 : [t_OnEvent][line:332] StartMonitoring Done... usbcore found... ehci_hcd found... ohci_hcd found... usb_storage found... [DevMgr/Fatal] 32 : [t_OnEvent:268] DeviceManager::MESSAGE_USB_INSMOD_COMPLETE : (15) ++++++++ [CCPTvUtil:GetModelCode:24] ModelCode:TV-40C650 UPnP_ERR::[dlna at 3] addinfo@[] cpSendMSearch with no ipaddr, currently ignore this [DevMgr/Fatal] 33 : [t_Main:510] All devices are initiated!!! [CIP_KERNEL] count(1), value(0x0)

[juusso]

And? What did you expect to get?

[howy121]

its not that it wont let me wright anything as i wont to format mtd rwarea/ to reset USB hack

[juusso]

So, you have to unlock console to have possibility to write something to (10041004), enter to TOP debug menu (20089999) and navigate over menus. I though here is well explained on wiki...

Code: Select all

10041004
81588
20089999
2
0
0
2
2
90
number of your rwarea partition

[howy121]

thanks for the info so why dont anything come up when i write in 10041004 nothing shows

[juusso]

10041004 just unlocks the console. enter the 20089999 and you should see the TOP Debug Menu.

[howy121]

i know what your saying but if i type in 10041004 it not show so how do in now i typed it in corect if i carnt see what ive typed in lol sorry for this but its all new to me lol

[howy121]

right my tv is hacked again what the easy way of rooting