Page 1 of 2
Re: Problems with telnet enabler
Posted: Tue Mar 16, 2010 7:07 pm
by erdem_ua
You can use ExLink cable to reach TV's shell.
Or you can than prepare SamyGO.sh with telnet mode patched FW
After patch Advanced Mode FW. SamyGO.sh will in place, will not deleted after patch..
Re: Problems with telnet enabler
Posted: Tue Mar 16, 2010 10:18 pm
by erdem_ua
Yes. Place the SamyGO.sh in "Telnet Mode" FW, than use the Advanced mode. (you needed place Telnet Daemon starter line in SamyGO.sh file)
Also moved to Support forum.
Re: Problems with telnet enabler
Posted: Wed Mar 17, 2010 8:25 pm
by erdem_ua
Normal, you don't try to patch patched firmwares. Patch only original firmwares.
Re: Problems with telnet enabler
Posted: Wed Mar 17, 2010 8:49 pm
by erdem_ua
Nope, You needed to have 2 different FW image that created from original one.
Burn telnet one and create "/mtd_rwarea/SamyGO.sh" file with telnet enable command in it.
Than burn the advanced one to TV and go on
