Hello,
I have installed the app on my LE32D6500 (T-GASDEUC 1013.7) and it seem running well (ftp, nc but no samba) but after a couple of minutes the TV reboots. I also did the downgrade procedure with no effect. Has anybody experienced the same problem?
Regards and thanks in advance
D6500 reboot some minutes after APP run
Re: D6500 reboot some minutes after APP run
please share boot log of exlink output. this could be good start to troubleshoot issue. don't ask how to don't that - everything is on wiki and forums already.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
-
Flocki1987
- Posts: 4
- Joined: Mon Jan 20, 2014 1:33 pm
- Location: Gambach (Hessen) / Germany
Re: D6500 reboot some minutes after APP run
I got a similar problem here:
I downgraded my UE46D6500 and installed samygo - everything went fine while installation.
After I start the samygo app, the TV runs between 5 and 10 minutes, then the sound hums for a second and the TV reboots.
Does someone have a solution for this?
EDIT:
Just solved this problem by disabling watchdog and enable debug-mode on RSR232-Jack in Service-Menu.
I downgraded my UE46D6500 and installed samygo - everything went fine while installation.
After I start the samygo app, the TV runs between 5 and 10 minutes, then the sound hums for a second and the TV reboots.
Does someone have a solution for this?
EDIT:
Just solved this problem by disabling watchdog and enable debug-mode on RSR232-Jack in Service-Menu.