network enabled kernel for T-CHL5DAUC/T-CHL5DEUC(b550,b6000)

Here is information about customize your B series firmware..:!:This forum is NOT FOR USER questions or problems but DEVELOPER.
Post Reply

arris69
Official SamyGO Developer
Posts: 1700
Joined: Fri Oct 02, 2009 8:52 am
Location: Austria/Vienna (no Kangaroos here)
Contact:

network enabled kernel for T-CHL5DAUC/T-CHL5DEUC(b550,b6000)

Post by arris69 »

for tester:

kernel with network support for T-CHL5DAUC based devices.
safe method for testing, but its also possible to flash the kernel to tv (description in README in the archive)
just flash the kernel after you tested all functions on tv (usb storage detection, access to serial console, remote control etc.)

don't forget to disable watchdog and you need exlink cable.

http://www.zsolttech.com/SamyGO-Flash-I ... 093647.zip

bugfix1: seems serial console and remote control has no function.
changelog: partial merge of configuration from svn trunk (ssdtv_pci)
http://www.zsolttech.com/SamyGO-Flash-I ... 191410.zip

bugfix2: (18.11.2010) rebuild from other sources implemented tbml support.
http://linux.zsolttech.com/Samsung/Samy ... 183911.zip

package for T-CHL5DEUC: (09.12.2010)
http://linux.zsolttech.com/Samsung/Samy ... 195338.zip

happy testing and pls report too!

thnx for merv07 for testing and reports

arris
Last edited by arris69 on Sun Dec 26, 2010 10:32 pm, edited 6 times in total.
Reason: repack for DEUC
arris69
Official SamyGO Developer
Posts: 1700
Joined: Fri Oct 02, 2009 8:52 am
Location: Austria/Vienna (no Kangaroos here)
Contact:

Re: network enabled kernel for T-CHL5DAUC/T-CHL5DEUC(b550,b6000)

Post by arris69 »

merv07 wrote:Instructions to network enable kernel for T-CHL5DAUC(UA32B6000)
...
good luck,
merv07
woow, big thnx ;-)

one thing for SamyGO-All-Extensions-v0.03.6-r11-for-T-CHL5DAUC-20101210213931.zip
SamyGO/etc/init.d/02_04_vusb.init needs a change:

Code: Select all

for i in /sys/class/block/sd?/device/vendor ; do
to

Code: Select all

for i in /sys/block/sd?/device/model ; do
then nw-mounts should be accessible in the player (source: SamyGO Virt. USB)

thnx
arris
arris69
Official SamyGO Developer
Posts: 1700
Joined: Fri Oct 02, 2009 8:52 am
Location: Austria/Vienna (no Kangaroos here)
Contact:

Re: network enabled kernel for T-CHL5DAUC/T-CHL5DEUC(b550,b6000)

Post by arris69 »

kostek wrote:one more note where is no mkfs.vfat (only mkfs.ext?)
which used in samygo script.
the scripts are part of extensions pack, you can't use them stand alone.
kostek wrote: do anybody know where is "tv content" in b500,b600?
it was /mtd_wiselink in b7000.
nowhere?, that's why you need an usb-storage device but the tv just have 1 usb port -> so we shipp virtual usb to hold the usb port free for usb wifi/ethernet adaptor
kostek wrote: i try to mount samba share in /mtd_wiselink folder on my b7000 - it works, no need of virtual usb
if you move your movies around or delete some on /mtd_wiselink you see sometimes very old structure of the files, but if it's works for you it's fine. :)

arris
User avatar
juusso
SamyGO Moderator
Posts: 10129
Joined: Sun Mar 07, 2010 6:20 pm

Re: network enabled kernel for T-CHL5DAUC/T-CHL5DEUC(b550,b6000)

Post by juusso »

merv07, you`ve got wiki editor permissions :)
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE
User avatar
juusso
SamyGO Moderator
Posts: 10129
Joined: Sun Mar 07, 2010 6:20 pm

Re: network enabled kernel for T-CHL5DAUC/T-CHL5DEUC(b550,b6000)

Post by juusso »

Not Yet. check periodically authuld thread to know when Authuld falls. After this we can flash custom kernel (and other partitions) to CI+ devices.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

Post Reply

Return to “[B] Firmware”