[How-To] Alternatives of Samsung WiFi Link Stick

[gooseye]

manual is needed to fill up, here are some underwater stones to be noticed.
DWA-160 is being recognized as samsung`s native and doesn`t need to be re-flashed. The same with dwa-140 H/W rev B. (or A? need to check).
So re-flashing (or changing eeprom value) is needed on DWA-125 and 140 H/W rev A (or B..?)
thanks!

I've just bought the DWA-140. H/W Ver is B1 and it works straight out of the box on my C-series with T-VALDEUC-3007.1

[juusso]

OK, then it`s rev.A that won`t work

[gooseye]

I tried another DWA-140, H/W Ver B2. This one does NOT get recognised as Samsung.

Better to check carefully & get H/W B1. This is printed on the module itself, and on the lower left-hand corner of the box's serial number sticker.

[erdem_ua]

Could you try to change PID/VID values with e2p flashing on that B2 dongle?

[erdem_ua]

AFAIK rt3070sta works with rt2870sta driver.
Also D series TVs just have rt3572 drivers/utils!
So they are compatible hardwares. I believe your problem something differrent.

[juusso]

Everything seems to go well, but the values don't change.

Yes, seems this dongle is SamyGO resistent...

But i can confirm, that my DWA-125 H/W A1 F/W ver. 1.10 is ok with this method.