D series rooting (arm cpu architecture only) UPDATE!

[Denny]

And one next: is it possible to change default recording device, somewhere in the options ? ( I didn't found it)

i wrote you, it is posible if you have multiple devices, look at facebook , there is one image i think posted.

to get options menue you may go :
SmartHub -> RecordedTV -> RightSideUP you have 3 icons -> select 1st one "Device Managment" then go down to Default Recording Device : -> Select whitch one you want , if you have more then one.

remember, device that is not xfs format , will be listed only after exec uting of samygo app.

[jarod73]

This is my 03_03_nfsmount.init
I use a pendrive always connected to tvset to create sda1 virtual usb. ( at the moment I've not figured how to create one new at samygo start-up)
My nfsserver is freenfs configured to share d:\nfsrec\rec .
I can record but i can't access recorded files by tv-recording widget in smart-hub.

bye J.

Code: Select all

#!/bin/sh
#
# ? Copyright 1996-2010, ZsoltTech.Com
#       by Ser Lev Arris <arris@ZsoltTech.Com>
#
#       donated for the SamyGo Project
#       http://samygo.sourceforge.net/
#
#       Version: SamyGO svn $Id: 03_03_nfsmount.init 1069 2011-01-03 16:47:24Z arris69 $

. /dtv/SGO.env
# sleep 9
##### YOU CAN CHANGE ME HERE ######
SERVER="10.7.128.23"
# SERVER="10.0.0.1" # if you want a fixed server
SHARES="/rec"
# SHARES="Video Music Photo" # if you won't all your shares, but then set SERVER too!!
##### CHANGE ME END ######

FR_NAME="NFS Server"

M_OPTS="soft,tcp,async,nolock,rsize=32768,wsize=8192"

# M_OPTS="rw,soft,udp,nolock,rsize=32768,wsize=32768"
# M_OPTS="soft,tcp,nolock,rsize=32768,wsize=32768"
# M_OPTS="soft,tcp,nolock,rsize=8192,wsize=8192"
# M_OPTS="soft,tcp,nolock"

SERVERS="Don't set me!!"

####### DEST_DIR=$MOUNT_PATH/nfs
DEST_DIR="/dtv/usb/sda1"

do_mount()
{
#		$(echo -e "[sdg]\nVendor : NfsMount\nProduct : $FR_NAME\n\
#Serial : Q80VQLFG\nDevpath : 7\nLun : 0\nMountDir : $DEST_DIR\nFileSystem : vfat\n" >> /dtv/usb/log)
	
	for i in $S_MOUNTS ; do
########	M_POINT="$DEST_DIR/$1/$(echo -n $i | sed -e "s/\//_/g")"
		M_POINT="$DEST_DIR(echo -n $i | sed -e "s/\//_/g")"
########	mkdir -p "$M_POINT" 
		if [ `cat /proc/mounts | grep -c "$M_POINT"` -lt "1" ] ; then
########		/bin/busybox mount -o "$M_OPTS" "$1:$i" "$M_POINT"
			/bin/busybox mount -o "$M_OPTS" "$1:$i" "$DEST_DIR" -t nfs
		else
			echo "$M_POINT is mounted!"
		fi
	done
}

get_shares()
{
	if [ -z "$SHARES" ] ; then
		echo -n "Search Shares on: "
		for i in $SERVERS ; do
			echo $i
			# S_MOUNTS=$(showmount --no-headers -e $i | cut -d " " -f1)	
			S_MOUNTS=$(showmount --no-headers -e $i | sed 's/^\(.*\) .*/\1/')	
			[ -n "$S_MOUNTS" ] && do_mount $i
		done
	else
		echo -n "Fixed Server: "
		for i in $SERVERS ; do
			echo $i
			S_MOUNTS=$SHARES
			[ -n "$S_MOUNTS" ] && do_mount $i
		done
	fi
}

get_servers()
{
	if [ -z "$SERVER" ] ; then
		# SERVERS=$(cat /proc/net/arp | grep -v "IP address" | cut -d " " -f1)
		SERVERS=$(cat /proc/net/arp | grep -v "IP address" | sed 's/^\(\w*.\w*.\w*.\w*\) *.*/\1/')
	else
		SERVERS=$SERVER
	fi
}

case $1 in 
	start)
	# for systems with modular nfs kernel support
	insmod $MOD_DIR/kernel/net/sunrpc/sunrpc.ko
	insmod $MOD_DIR/kernel/fs/lockd/lockd.ko
	insmod $MOD_DIR/kernel/fs/nfs_common/nfs_acl.ko
	insmod $MOD_DIR/kernel/fs/nfs/nfs.ko
	get_servers
	get_shares
	;;
	stop)
	# may can fail if device access the mount from content library
	# for i in $(cat /proc/mounts | grep nfs | cut -d " " -f2) ; do
	for i in $(cat /proc/mounts | grep "$DEST_DIR" | sed 's/^\(.*\) \(.*\) nfs .*/\2/') ; do
		/bin/busybox umount $i
	done
	;;
	status)
	/bin/mount | grep "$DEST_DIR"
	;;
	*)
	echo "Usage: $0 {start|stop|status}" 1>&2
	exit 0
	;;
esac

[jarod73]

Cyrille, I don't use 80_80 anymore and I don't use scripts from remi75.
You need only to use 03_03 I've attached here.

replace your 03_03 ( after a making a backp copy of it )and change only server and share.
share must start with / so your share should be "/Multimedia Multimedia/Films Multimedia/Dessins_animes",
assuming you nfs server is sharing this full path.

there is something wrong if you have NFS mounted on /dtv/usb/sda1/Multimedia , you have to mount it on /dtv/usb/sda1 to work.
I think you have not replaced 03_03 script.
I use nfs only for recording and samba to access shares where my video are.

Bye J.

[hondavtec]

I use nfs only for recording and samba to access shares where my video are.

Do I need to create a second virtual USB device... if yes: how?
Could I just create / duplicate a 02_04_vusb2.init file?

This question is really bugging me for some time now...

[jarod73]

Cyrille ,
on my tvset sda1 is pendrive (I use the one xfs formatted by the pvr-recorder and is always connected), sdb is samygo virtual usb where samba shares are mounted automatically .
script executes pratically this :

Code: Select all

/bin/busybox mount -o soft,tcp,async,nolock,rsize=32768,wsize=8192 10.7.128.23:/rec /dtv/usb/sda1 -t nfs

try to run the command above manually to see what you obtain via <your tv ip>/phpsysinfo/shell.php
and also try browse your tv to see if your pendrive is really sda1 like on mine.

ah.. and you changed default recording device , right?? if not you are trying to record over samygo virtual usb I suppose.