Some SamyGo Errors on D6500 discovered via ExLink

[setti]

Hi all,

today Ive soldered my ExLink cable (thx to Nokia for an old USB - RS232 converter ) and just viewed the log while starting SamyGo to see what happens.
Ive seen some different errors. Here is a short snippet:

Code: Select all

chmod -R 755 /mtd_down/widgets/user/SamyGO/SamyGO/*
/mtd_down/widgets/user/SamyGO/SamyGO/rcSGO /mtd_down/widgets/user/SamyGO/SamyGO &

sed: /dtv/usb/log: No such file or directory
/mtd_down/widgets/user/SamyGO/SamyGO/etc/init.d/01_01_catch_crap.init: line 31: ../../bin/busybox: not found
cp: cannot stat '/dtv/usb/sd*/smb_userdata': No such file or directory
tcpsvd: listening on 0.0.0.0:21, starting
====================================================================
[SELP] evdev module load!!(1010_223 RELEASE preempt mod_unload ARMv7 )
====================================================================
insmod: can't insert '/mtd_down/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/drivers/usb/input/usbhid.ko': unknown symbol in module, or unknown parameter
====================================================================
[SELP] hid module load!!(1010_223 RELEASE preempt mod_unload ARMv7 )
====================================================================
====================================================================
[SELP] usbhid module load!!(1010_223 RELEASE preempt mod_unload ARMv7 )
====================================================================
mkfs.vfat 2.11 (12 Mar 2005)
====================================================================
[SELP] dummy_hcd module load!!(1010_223 RELEASE preempt mod_unload ARMv7 )
====================================================================
====================================================================
[SELP] g_file_storage module load!!(1010_223 RELEASE preempt mod_unload ARMv7 )
====================================================================
sd 1:0:0:0: [sdb] Assuming drive cache: write through
SDL_VideoQuit >> call SDL_PublicSurface #1466 
SDL_VideoQuit >> call SDL_VideoSurface #1476 
sd 1:0:0:0: [sdb] Assuming drive cache: write through
## [HideScreen] Screen(1), Caller(71)
## [ShowScreen] Screen(1), Caller(71)
/mtd_down/widgets/user/SamyGO/smarthub_closer.so
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!

## RunApp [CallThread=0x7a528460] App (71) runs App(InfoLink3:67), nRunData(0x0), nRunOption(0x0) ##

So here the errors:
1. sed: /dtv/usb/log: No such file or directory
2. /mtd_down/widgets/user/SamyGO/SamyGO/etc/init.d/01_01_catch_crap.init: line 31: ../../bin/busybox: not found
3. cp: cannot stat '/dtv/usb/sd*/smb_userdata': No such file or directory
4. insmod: can't insert '/mtd_down/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/drivers/usb/input/usbhid.ko': unknown symbol in module, or unknown parameter

Maybe you already know them, but maybe not. Hope i could help the SamyGo Dev team a bit with this information.



EDIT:
At the end of the loading process the following errors also occour:

Code: Select all

mount: unknown filesystem type 'devpts'
insmod: can't insert '/mtd_down/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/net/bluetooth/bluetooth.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/mtd_down/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/drivers/bluetooth/hci_usb.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/mtd_down/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/net/bluetooth/l2cap.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/mtd_down/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/net/bluetooth/rfcomm/rfcomm.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/mtd_down/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/net/bluetooth/bnep/bnep.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/mtd_down/widgets/user/SamyGO/SamyGO/lib/modules/2.6.30.9/kernel/net/bluetooth/hidp/hidp.ko': unknown symbol in module, or unknown parameter
Starting Bluetooth subsystem: hcidCan't open HCI socket.: Address family not supported by protocol
 sdpdCan't open HIDP control socket: Address family not supported by protocol
 hidd.
sh: SGclpSDL: unknown operand
* exists
sh: SamyGO.dat:0: unknown operand
/mtd_down/widgets/user/SamyGO/SamyGO/etc/init.d/04_09.rar2fs.init: line 46: rar2fs: not found
/mtd_down/widgets/user/SamyGO/SamyGO/etc/init.d/04_09.rar2fs.init: line 46: find: not found

[juusso]

Not important. Leave it as is.