Device Manager 55D8000

[derewasazx]

Code: Select all

[ Device Manager - TOP Debug Menu]
        ------------------------------------
           01  : Start DeviceManager
           02  : Stop DeviceManager
           03  : Suspend Mode Test - Sleep
           04  : Suspend Mode Test - WakeUp
           05  : Start Monitoring
           06  : Stop Monitoring
           07  : Start Stress Test
           08  : Stop Stress Test
        ------------------------------------
           11  : USB Test
           12  : DLNA, FLASH, ODD, HDD, MoIP Test
        ====================================
           21  : Print ALL Device Info
           22  : Print Device Info with KEY
           23  : Print ALL Partition Info
        ====================================
           80  : Print Deadlock Status
           88  : Shell
        ====================================
           FF : Exit
        ====================================
        DBG> : 0x88
VDLinux#>

Hello, could you tell me the code for :VDLinux#>

[juusso]

OK. And the trick is.... ?

If you found the way how to unlock filtering, then were waiting for solution, another people should confirm it too.

Have you added this text in log while posting this message or console is unfiltered by default?.

[derewasazx]

I'm sorry I did not understand, no code to unlock (VDLinux #>)? thanks

[juusso]

here is no code. This shell is with filtered symbol input, implemented at kernel level.

[derewasazx]

then you must find a way to disable the filter to write VDLinux #>?

[juusso]

Must?

i`m not, do you ?

[derewasazx]

and so that

[prairie]

So where did you activate "Device Manager" part of TDM? I have not seen this in D8000 TDM.

[juusso]

Code: Select all

23331003
20089999

====================================
      [ TOP Debug Menu]   
------------------------------------
  1  : SubSystem Print On/Off    
  2  : Platform Print Setting    
  3  : TD Print Setting    
  4  : Performance Print Setting    
  5  : Sdal Print Setting    
  6  : Sdal Trace Setting    
  10 : Factory Debug 
  11 : TD Debug
  12 : SubSystem DBG 
  13 : SubSystem Info Print
  21 : Louvre Print Setting 
------------------------------------
  70 : Jade Debug
  80 : PVR Debug
====================================
  99 : Exit 
====================================
DBG> : 2
Input Start Level << : 0
Input End Level << : 0

====================================
     [Platform Debug List]
------------------------------------
  1. Basic Platform
  2. Advanced Platform
  3. Java
  4. Pharos
  5. Met Platform
  6. Shadow
------------------------------------
  99 : Exit
====================================
cmd> 2

====================================
     [Platform Debug List]
------------------------------------
  1 : FrontRunner Debug
  2 : DeviceManager Debug
  3 : ContentsManager Debug
  4 : Uniplayer Debug
  5 : InfoLink Debug
  6 : NetworkManager Debug
  7 : NetworkSetup Debug
  8 : BluetoothApp Debug
  9 : Map Debug
  10 : CMPDivxApp Debug
  11 : MediaPlay Debug
  12 : MovieDemoApp Debug
  13 : CEC Debug
  14 : PSA Debug
  15 : USBApp Debug
  16 : FlashApps Debug
  17 : SWU Debug
  18 : DMR Debug
  19 : HNC Debug
  20 : Browser Debug
  21 : SEF Debug
  22 : HasApi Debug
  23 : DAE Plugin Debug
  24 : DeviceAPI Debug
------------------------------------
  99 : Exit
====================================
cmd> 2

====================================
     [DeviceManager Debug Module]
------------------------------------
  1 : [OFF] DevMgr	  2 : [OFF] DevMgr_FLASH	  3 : [OFF] DevMgr_HDD	
  4 : [OFF] DevMgr_MSC	  5 : [OFF] DevMgr_PTP	  6 : [OFF] DevMgr_SS	
====================================
 Debug Level = Fatal
====================================
 80 : All OFF
 81 : All ON
 85 : Set Debug Level
====================================
 90 : DeviceManager MW Debug
 91 : DeviceManager SS Debug
 92 : DEV Print Setting
 99 : Exit
====================================
cmd> 0x90

	====================================
	      [ Device Manager - TOP Debug Menu] 
	------------------------------------
	   01  : Start DeviceManager 
	   02  : Stop DeviceManager 
	   03  : Suspend Mode Test - Sleep
	   04  : Suspend Mode Test - WakeUp
	   05  : Start Monitoring
	   06  : Stop Monitoring
	   07  : Start Stress Test
	   08  : Stop Stress Test
	------------------------------------
	   11  : USB Test 
	   12  : DLNA, FLASH, ODD, HDD, MoIP Test 
	====================================
	   21  : Print ALL Device Info 
	   22  : Print Device Info with KEY 
	   23  : Print ALL Partition Info 
	====================================
	   80  : Print Deadlock Status 
	   88  : Shell 
	====================================
	   FF : Exit 
	====================================
	DBG> : 0x88

[derewasazx]

---------------------- Shell TEST ----------------------
----------------------------------------------------------

1 : [mount] mount status display
2 : [df] df status display
3 : [Log File] Log File Display
4 : [cat /proc/bus/usb/devices]
----------------------------------------------------------
5 : [hotplug ON] turn on the hotplug
6 : [hotplug OFF] turn off the hotplug
----------------------------------------------------------
7 : [Forced umount 1] umount /dtv/usb/sda1
8 : [Forced umount 2] umount /dtv/usb/sdb1
9 : [Forced umount 3] umount /dtv/usb/sdc1
10 : [Forced umount 4] umount /dtv/usb/sdd1
----------------------------------------------------------
88 : [Find Open File or Directory]
----------------------------------------------------------
11 : [dir1] ls -al /dtv/usb/sda1
12 : [dir2] ls -al /dtv/usb/sdb1
13 : [dir3] ls -al /dtv/usb/sdc1
14 : [dir4] ls -al /dtv/usb/sdd1
15 : [top] process utilization display
16 : [pwd] current directory display
17 : [ps]
18 : [Lock Status of log file] ls -al /dtv/usb
19 : [/sys/block] ls -al /sys/block
20 : [dmesg]
----------------------------------------------------------
30 : Enter system command
----------------------------------------------------------
51 : Parse /proc/bus/usb/devices
52 : Usb stress test : USB bus reset
----------------------------------------------------------
71 : USB Info Parser Test: Display All Nodes
72 : USB Info Parser Test: Display Root Nodes
73 : USB Info Parser Test: Display Port1 Nodes
74 : USB Info Parser Test: Display Port2 Nodes
75 : Dir Tree Test: Display Sub Folder
76 : Dir Tree Test: Display Folder Only
----------------------------------------------------------
90 : Debug Print
----------------------------------------------------------
ff: EXIT
----------------------------------------------------------

User Input : 0x30
Type shell command >> hello, this menu requires a code? thanks