TOP Debug Menu UE40D5003

[Yarek]

Hi friends! im from Ukraine.
I have a TV UE40D5003. To play a video, I changed the model UE40D5000 in the service menu. Now i need to edit the "Source" menu. I know that it can be done using 3SPEED, FATSTORY. These commands I can not transmit on IR. I do not have a universal remote ((

Can I edit the "Source" menu in TOP Debug Menu??? If yes, how to do it???
I did Ex-Link cable and In service menu enable Debug mode for the RS232 port.
Now I connect to the TV and can watch any setting.
where to look "Source" menu in TOP Debug Menu?

And how to add network configuration in main menu? I want to connect USB WiFi dongle.
Is it possible?
thanks!

[juusso]

It is hard to explane you where it is on your TV, because i never saw TDM of D5003...
But usually the Factory debug (=service menu) is located...

http://wiki.samygo.tv/index.php5/Top_De ... g_Menu_.5D

====================================
[ TOP Debug Menu]
------------------------------------
1 : SubSystem Print On/Off
2 : Platform Print Setting
3 : TD Print Setting
4 : Performance Print Setting
5 : Sdal Print Setting
6 : Sdal Trace Setting
10 : Factory Debug <= Here is the enter to the Service menu.
11 : TD Debug
12 : SubSystem DBG
20 : Performance File Write
21 : Louvre Print Setting
22 : JavaMW Print Setting
30 : Auto Lock DBG
------------------------------------
50 : ROSE Debug
60 : MediaLink Debug
70 : Jade Debug
====================================
99 : Exit
====================================
DBG> :

The structure inside is equal the Service menu you see on the screen.

[Yarek]

juuso, thanks!
All made by your example but in my tv TOP Debug Menu is not fully open. Or i am doing something wrong.

Code: Select all

 [ Control]
SOURCE_TYPE_ATV1  RESOLUTION_PAL
------------------------------------
[0] EDID
[1] Sub Option
[2] PDP Option
[3] Hotel Option
[4] Shop Option
[5] ...
[6] Sound
[7] ...
[8] ...
====================================
  99  : Exit
====================================



 [ Config Option]
SOURCE_TYPE_ATV1  RESOLUTION_PAL
------------------------------------
[0] ...
[1] ...
[2] ...
[3] ...
[4] ...
[5] ...
[6] ...
[7] ...
[8] ...
[9] ...
[10] ...
[11] ...
[12] ...
[13] ...
[14] ...
[15] ...
[16] ...
[17] ...
[18] ...
[19] ...
[20] ...
[21] ...
[22] DVI/HDMI SOUND
[23] HDMI HOT PLUG
[24] HOTPLUG SWITCHING
[25] HOT PLUG DURATION
[26] CLK TERM DURATION
[27] HDMI FLT CNT SIG
[28] HDMI FLT CNT LOS
[29] UNSTABLE BAN CNT
[30] HDMI Err Cnt
[31] HDMI ROBIN
[32] HDMI Callback
[33] HDMI CTS Thld
[34] HDMI CTS Cnt1
[35] TMDS_EQ2_Boost
[36] TMDS_EQ2_Gain
[37] TMDS_PLL_Loop
[38] TMDS_CPREG_BLEED
[39] HDMI EQ
[40] ...
[41] ...
[42] DVI SET TIME
[43] ...
[44] Function Vendor
[45] ...
[46] ...
[47] ...
[48] ...
[49] ...
[50] ...
[51] ...
[52] ...
[53] ...
[54] HDMI Sync
[55] ...
[56] FANET
[57] Support MultiMedia Key
====================================
  99  : Exit
====================================
Select Menu :

How do I know where each item, in what Number?
When i press, for example , 5 --> open

Code: Select all

Input Down(0)/Up(1)/Down100(2)/Up100(3)/Exit(99) > :

Then i press 0 -->

Code: Select all

Input Down(0)/Up(1)/Down100(2)/Up100(3)/Exit(99) > :

nothing changes ((

[juusso]

Those dots (instead of readable text) are hidden Service menu options. To know what is what, you have either to enter to that setting and (notice the default meaning!) try to change it. Or anyone with unlocked extended service menu should post the photos where those settings are shown. If you just look in to the setting, nothing hapens if you don`t change (or if change - set back before to enter 99).

About your example: Maybe if you press 0, this is marginal meaning and here is no go further. But maybe if you press 1, you get some different value.

[Yarek]

About your example: Maybe if you press 0, this is marginal meaning and here is no go further. But maybe if you press 1, you get some different value.

To edit a hidden menu need to activate it. Otherwise, no way.
How to do it in the TOP Debug Menu I can not find (((
have any ideas?

[juusso]

Nah, hidden menu is hidden just only in service menu. but it could be edited over exlink, at least on D6750 i could change meanings without to unlock extended menu.
The problem (or not) is that you don`t know what menu is hidden, but this you can search out by testing...
I`m not at front of TV, but i think your TDM is similar to D6 series, so the hidden submenus (dots instead of names) could be easy identified.

[Yarek]

at least on D6750 i could change meanings without to unlock extended menu.

you're right. Values are changing.
After the change of second Item the TV does not turn on ((( Its just logo than Black screen (((
i cant get into TOP Debug Menu by ex-link cable ((
I think i need to do EEPROM Reset.

is it help???

[juusso]

Yes, seems you changed tuner, or some other critical setting.

[Yarek]

I restored my tv. Later, will put photos. After resetting the eeprom selected a model D5000 and the sound was better. Much better!
Connected TRENDnet TEW-644B (04e8: 2018) but the TV does not see it (
I decided to change the model on the D5800 and then TV does not see USB WiFi t?o ((((
After that, the touchpad has stopped working. Again, I did Eeprom reset This did not help. Touchpad does not work (((
How to make work USB WiFi???
Today I did a lot of work! I want so worked WiFi!!!
please help!

[juusso]

How did you do eeprom reset? same pins as on wiki for D6 series?

I think the wifi problem could be the Service menu setting WiFI (internal or external).
What is touchpad? i didn`t hear about this anything. what comminication format is between it and TV and so on. I believe you get it working back if you set all settings back or find out why this stopped.

If you set external wifi i think TV starts to recognize dongle, but i know here was some problems on D series - even recognized, TV won`t find any networks, even open networks...