LN37D550 is locked, no longer works.

[dhalsim]

Good night dear.

my tv LN37D550 LN37D550K7GXZD complete model, stopped working after have accidentally
selected "MICOM UPGRADE" mode service.
The TV has changed the status of this option to "WAIT" and stayed that way for 10 minutes, without accepting anythig
? command on the remote, I turned off the TV energy
after these events the tv not start anymore, and do not respond to commands from remote control
not respond to keyboard functions and not the totals led standby.

Reading the forum SAMYGO exlink I fabricated the cable and the TV I get the following:

=================================
onboot (Mar 3 2011 - 15:09:38)
release ver : 1003 - RELEASE
etc :
=================================

Onboot X5 Sync mode
LCD FastLogo Run...
Loading Kernel....
load kernel start, size : 131072 + 2752512 byte
Jump Kernel....

auth success by h/w sha1 !!!! there is format error !!!!UART1 flag is wrong data
it will be set default - UART mode.

applied also reset the atmel chip red line and blue line.
the tv does not turn on.

installing ruSamsungTVCommunicator_V0.0.9.0 see the tv in ip: 192.168.1.3, but not do anything.

not specify debug mode to rs232: (

Grateful for a helping hand

sorry - I by weak English.

att
Dhalsim

[juusso]

No help. Just service repair. ..

[dhalsim]

Hello, please be more specific,
You have the. Bin eeprom this model, if you can I rewrite the eeprom and try to complete this repair.

Have you done this procedure to remove the eeprom rewrite it and return it in the motherboard?

Here it is common to this type of repair.

att
Dhalsim