so i read like crazy tro the fourms been on this for a few days now and no luck hoplly some one can help
-------------------------
**edit**
just notice that each time i connect the dongle it says the samsung wifi dongle is disconeted, after a few min /secs.
-------------------------
so i have a wifi dongle wusb600n and trying to use it for my new tv UA46D5500RMXSQ.
*linux* lsusb
Bus 002 Device 003: ID 1737:0071 Linksys WUSB600N v1 Dual-Band Wireless-N Network Adapter [Ralink RT2870]
so i went and change the pid/vid to samsung ofcurse wasnt easy :S it seem u need to recomplier the fimware of the dongle before did it .
the recomplier file
download the fimeware form here:
http://www.ralinktech.com/en/04_support ... php?sn=501
pick the one -> RT2870USB(RT2870/RT2770)
and change where made by these two source :
http://woikr.com/home-entertainment/usi ... ternet-tv/
http://linuxforums.org.uk/index.php?top ... 8ejhfhafh6
after change
*linux* lsusb
Bus 002 Device 006: ID 04e8:2018 Samsung Electronics Co., Ltd WIS09ABGN LinkStick Wireless LAN Adapter
I'm able to connect with my computer , wpa/wpa2 enyecrt and see networks and connect no problem.
connect it to the tv and nothing happens it ids the dongle as a samsung one but dosnt show any networks just keeps searching , tried manuly adding the network tv gets stucked and restarts it self.
by the way the network encryt is wpa2-personal, g only mode, encration is wpa-tikp or wpa2-aes
as far as i know and read it should work but it dose not
any help would be apriceted
p.s sry for crapy english
btw iwconfig output
ra0 Ralink STA ESSID:"linksys" Nickname:"RT2870STA"
Mode:Managed Frequency=2.462 GHz Access Point: 00:22:6B:54:76:3A
Bit Rate=54 Mb/s
RTS thr:off Fragment thr:off
Link Quality=100/100 Signal level:-59 dBm Noise level:-88 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
