[SOLVED] Brick during OTN

Post by **prairie** » Sun Jan 06, 2013 9:09 pm

Hi guys - had a problem with OTN downgrade using samygo server. The download and reboot occurred and flashing seemed to go fine but TV just reboots and begins the flash process every time. D-8000 T-GAP8AKUC1018 (modified) was on-board, can someone check logs to see what was sent? server address used was 149.154.159.134 Looks like I will have to scrounge around for another main board

debug output

SpoilerShow

Code: Select all

.
>> P0063_102 onboot(Feb 22 2011-09:01:24)
[SELP] preset_lpj manual setting 1597440

[SDP EINTR] 30 External interrupt is registered 

[SDP EINTR] 31 External interrupt is registered 

[SDP INTR MERGER] 29 interrupt merger is registered 

================================================================================

 SAMSUNG Genoa-P Kernel

 Version : 1011_228 RELEASE

================================================================================


init started: VDLinux-BusyBox v1.14.3-VD Linux VDLinux.1.2.1.x (2011-01-18 10:51:51 KST)

starting pid 26, tty '/dev/ttyS2': '/etc/rc.local'
/etc/rc.local start!!!!
##### send signal from USER, SIG : 0, init(1)->???(26) sys_kill


starting pid 34, tty '/dev/ttyS2': '-/bin/sh'
/etc/profile start!! 
=====================================================================
  ROOTFS VERSION : "Genoa.P 1018 RELEASE" KERNEL MODULE VERSION : "1011_228"
=====================================================================
====================================================================

[SELP] fsr module load!!(1011_228 RELEASE preempt mod_unload ARMv7 )

====================================================================

[sdp_mmch_isr] DTO Interrupt not caused!!!!

====================================================================

[SELP] fsr_stl module load!!(1011_228 RELEASE preempt mod_unload ARMv7 )

====================================================================

====================================================================

[SELP] rfs_glue module load!!(1011_228 RELEASE preempt mod_unload ARMv7 )

====================================================================

====================================================================

[SELP] rfs_fat module load!!(1011_228 RELEASE preempt mod_unload ARMv7 )

====================================================================

mount mtd_rwarea
2nd partition!!
mount mtd_exe
mount mtd_rocommon
mount mtd_appext
mount mtd_appext 2nd partition!!!
Run FastLogo...
====================================================================

[SELP] FastLogo module load!!(1011_228 DEBUG preempt mod_unload ARMv7 )

====================================================================

====================================
 
 Update Images with standalone !!!
 
====================================
USB start...
mount mtd_swu
mount mtd_emanual
/etc/Scripts stand_alone_upgrade.sh  start!!!
UPGRADE_ROLLBACK flag is found!
====================================================================

[SELP] usbcore module load!!(1011_228 RELEASE preempt mod_unload ARMv7 )

====================================================================

====================================================================

[SELP] ehci_hcd module load!!(1011_228 RELEASE preempt mod_unload ARMv7 )

====================================================================

====================================================================

[SELP] samdrv module load!!(1011_228 DEBUG preempt mod_unload ARMv7 )

====================================================================

umount mtd_exe,mtd_rocommon,mtd_appext...
---- FLAG FILES:
UPGRADE_START-change partition
/mtd_rwarea/UPGRADE_FAIL
/mtd_rwarea/UPGRADE_ROLLBACK
/mtd_rwarea/UPGRADE_START
---- option: 
[USB Stand-alone upgrade] rollback is starting
====================================================================

[SELP] ohci_hcd module load!!(1011_228 RELEASE preempt mod_unload ARMv7 )

====================================================================

====================================================================

[SELP] usb_storage module load!!(1011_228 RELEASE preempt mod_unload ARMv7 )

====================================================================

StandAloneApp START
Running Option : -r
onoff = 0
[SDAL_Wrapper] BOARD TYPE : T-GAP8AKUC

[SDAL_Wrapper] Genoa-P 8AUSC BOARD


<-- SDAL VERSION : TMP-GENOAP-COMMON-V1.0.162-110804-162-1 -->

Running CheckMemoryMap....


 ******** spIIoSys_GetRevisionID ***********



 ******** spIIoSys_GetRevisionID = 1 ***********

WARNING: This program not compiled for -t option
GENOA-P...
[SDAL_Wrapper] PDP PANEL...
Shadow 2.5 (revision number: DTP-BP-Shadow-0212-Genoa-AUS-11-Release) is being initialized.

.@@@@@@@@@@@@@@@@[SDGFX] Not Use SP Plane!!!!!



.@@@@@@@@@@@@@@@@[SDGFX] Not Use SP Plane!!!!!


/mtd_swu/standalone/SWU_LANG_US is detected. /mtd_swu/standalone/shadow_us.ttf will be used
[IsReverse : 0] use SCFont::ENGINE_FONTFUSION
Temp log : CPreAllocatedMemoryAllocator::initialize, m_pBuffeusb 3-1: This device have invalid speed info

usb 3-1: If you see this error log, please send me log and connecting device info.  Kim, Kyung-Sik(ksfree.kim@samsung.com)

r = 0X65EBB008
===================
===================
Font Information = 12SCFontFusion
===================
===================
[Window is Initialized!!!]
Window is Showed!!!
FontEngineType : 1
onoff = 1
GPIOLEVEL : 0
GPIO is LOW!!!!!!!!!! Normal Upgrade
SWU_InitUpgradeDevice(0)InitGenoaPSubmicomUpgrade
m_Retryflag = FALSE
SetBootLockFlag : m_SelectIsLock = BOOT_LOCK_MICOM_FLASH
....Change Baudrate : 9600
m_hDevice = 52
ttyS1
Finish changing handler
EmptyBuf....
/mtd_rwarea/UPGRADE_FACTORY is not exist
This is Second Partition
[Image path : /mtd_swu/1]

[GetPartitionList time : 40 sec ]
[CheckVersion time : 30 sec ]
This is Second Partition
This is Second Partition
This is Second Partition
This is Second Partition
This is Second Partition
This is Second Partition
This is Second Partition
This is Second Partition
This is Second Partition
This is Second Partition
This is Second Partition
This is Second Partition
This is Second Partition
This is Second Partition
This is Second Partition
This is Second Partition
[partition mask : 0x1]
[CheckFile time : 0 sec ]
[Backup time : 70 sec ]
Flash Write Start
umount /mtd_exe;sync
usb 3-1.1: This device have invalid speed info

usb 3-1.1: If you see this error log, please send me log and connecting device info.  Kim, Kyung-Sik(ksfree.kim@samsung.com)

umount: can't umount /mtd_exe: Invalid argument
partition.erase /dev/bml0/13;stl.format -r 2 /dev/bml0/13
This program is operated over FSR based
usb 3-1.2: This device have invalid speed info

usb 3-1.2: If you see this error log, please send me log and connecting device info.  Kim, Kyung-Sik(ksfree.kim@samsung.com)

usb 3-1.3: This device have invalid speed info

usb 3-1.3: If you see this error log, please send me log and connecting device info.  Kim, Kyung-Sik(ksfree.kim@samsung.com)

sd 0:0:0:0: [sda] Assuming drive cache: write through

sd 0:0:0:0: [sda] Assuming drive cache: write through

FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!

The flash memory blocks have been erased successfully.
+---------------------------------------------------------------------+
|  stl.format : STL-level Partitioning Tool for Flash Block Devices   |
+---------------------------------------------------------------------+
This partition does not have GWL attribute
[Block size  : 128 KB]
[Total unit  :    678]
[Block Device Information for /dev/bml0/13]
--------------------------------------------
 Total number of sectors = 168960 (41 MB/84 MB)
--------------------------------------------
STL format complete.
+------------------------------------------------------------------------+
|  stl.restore : stl-level Partition Restore Tool for NAND Flash Memory  |
+------------------------------------------------------------------------+

    0%
\
    0%
/
    0%
-
    0%
\
    0%
/
    0%
-
    0%
\
    0%
/
    1%
-
    1%
\
    1%
/
    1%
-
    1%
\
    1%
/
    2%
-
    2%
\
    2%
/
    2%
-
    2%
\
    2%
/
    2%
-
    3%
\
    3%
/
    3%
-
    3%
\
    3%
/
    3%
-
    4%
\
    4%
/
    4%
-
    4%
\
    4%
/
    4%
-
    5%
\
    5%
/
    5%
-
    5%
\
    5%
/
    5%
-
    5%
\
    6%
/
    6%
-
    6%
\
    6%
/
    6%
-
    6%
\
    7%
/
    7%
-
    7%
\
    7%
/
    7%
-
    7%
\
    8%
/
    8%
-
    8%
\
    8%
/
    8%
-
    8%
\
    8%
/
    9%
-
    9%
\
    9%
/
    9%
-
    9%
\
    9%
/
   10%
-
   10%
\
   10%
/
   10%
-
   10%
\
   10%
/
   11%
-
   11%
\
   11%
/
   11%
-
   11%
\
   11%
/
   11%
-
   12%
\
   12%
/
   12%
-
   12%
\
   12%
/
   12%
-
   13%
\
   13%
/
   13%
-
   13%
\
   13%
/
   13%
-
   14%
\
   14%
/
   14%
-
   14%
\
   14%
/
   14%
-
   14%
\
   15%
/
   15%
-
   15%
\
   15%
/
   15%
-
   15%
\
   16%
/
   16%
-
   16%
\
   16%
/
   16%
-
   16%
\
   17%
/
   17%
-
   17%
\
   17%
/
   17%
-
   17%
\
   17%
/
   18%
-
   18%
\
   18%
/
   18%
-
   18%
\
   18%
/
   19%
-
   19%
\
   19%
/
   19%
-
   19%
\
   19%
/
   20%
-
   20%
\
   20%
/
   20%
-
   20%
\
   20%
/
   20%
-
   21%
\
   21%
/
   21%
-
   21%
\
   21%
/
   21%
-
   22%
\
   22%
/
   22%
-
   22%
\
   22%
/
   22%
-
   23%
\
   23%
/
   23%
-
   23%
\
   23%
/
   23%
-
   23%
\
   24%
/
   24%
-
   24%
\
   24%
/
   24%
-
   24%
\
   25%
/
   25%
-
   25%
\
   25%
/
   25%
-
   25%
\
   26%
/
   26%
-
   26%
\
   26%
/
   26%
-
   26%
\
   26%
/
   27%
-
   27%
\
   27%
/
   27%
-
   27%
\
   27%
/
   28%
-
   28%
\
   28%
/
   28%
-
   28%
\
   28%
/
   29%
-
   29%
\
   29%
/
   29%
-
   29%
\
   29%
/
   29%
-
   30%
\
   30%
/
   30%
-
   30%
\
   30%
/
   30%
-
   31%
\
   31%
/
   31%
-
   31%
\
   31%
/
   31%
-
   32%
\
   32%
/
   32%
-
   32%
\
   32%
/
   32%
-
   32%
\
   33%
/
   33%
-
   33%
\
   33%
/
   33%
-
   33%
\
   34%
/
   34%
-
   34%
\
   34%
/
   34%
-
   34%
\
   35%
/
   35%
-
   35%
\
   35%
/
   35%
-
   35%
\
   35%
/
   36%
-
   36%
\
   36%
/
   36%
-
   36%
\
   36%
/
   37%
-
   37%
\
   37%
/
   37%
-
   37%
\
   37%
/
   38%
-
   38%
\
   38%
/
   38%
-
   38%
\
   38%
/
   38%
-
   39%
\
   39%
/
   39%
-
   39%
\
   39%
/
   39%
-
   40%
\
   40%
/
   40%
-
   40%
\
   40%
/
   40%
-
   41%
\
   41%
/
   41%
-
   41%
\
   41%
/
   41%
-
   41%
\
   42%
/
   42%
-
   42%
\
   42%
/
   42%
-
   42%
\
   43%
/
   43%
-
   43%
\
   43%
/
   43%
-
   43%
\
   44%
/
   44%
-
   44%
\
   44%
/
   44%
-
   44%
\
   44%
/
   45%
-
   45%
\
   45%
/
   45%
-
   45%
\
   45%
/
   46%
-
   46%
\
   46%
/
   46%
-
   46%
\
   46%
/
   47%
-
   47%
\
   47%
/
   47%
-
   47%
\
   47%
/
   47%
-
   48%
\
   48%
/
   48%
-
   48%
\
   48%
/
   48%
-
   49%
\
   49%
/
   49%
-
   49%
\
   49%
/
   49%
-
   50%
\
   50%
/
   50%
-
   50%
\
   50%
/
   50%
-
   50%
\
   51%
/
   51%
-
   51%
\
   51%
/
   51%
-
   51%
\
   52%
/
   52%
-
   52%
\
   52%
/
   52%
-
   52%
\
   52%
/
   53%
-
   53%
\
   53%
/
   53%
-
   53%
\
   53%
/
   54%
-
   54%[CIP_KERNEL] /dev/tfsr8

[CIP_KERNEL] ae5c is authuld length : file open success(rootfs)  

[CIP_KERNEL] >>> (/bin/authuld) file is successfully authenticated <<< 

.[0;31;40m[CIP_AUTHULD] .[0;37;40m====================================================
.[0;31;40m[CIP_AUTHULD] .[0;37;40m.     Authuld Version : 1.6 : REL
.[0;31;40m[CIP_AUTHULD] .[0;37;40m====================================================

\
   54%
/
   54%
-
   54%
\
   54%
/
   55%
-
   55%
\
   55%
/
   55%
-
   55%
\
   55%
/
   55%
-
   56%
\
   56%
/
   56%
-
   56%
\
   56%
/
   56%
-
   57%
\
   57%
/
   57%
-
   57%
\
   57%
/
   57%
-
   58%
\
   58%
/
   58%
-
   58%
\
   58%
/
   58%
-
   58%
\
   59%
/
   59%
-
   59%
\
   59%
/
   59%
-
   59%
\
   60%
/
   60%
-
   60%
\
   60%
/
   60%
-
   60%
\
   61%
/
   61%
-
   61%
\
   61%
/
   61%
-
   61%
\
   61%
/
   62%
-
   62%
\
   62%
/
   62%
-
   62%
\
   62%
/
   63%
-
   63%
\
   63%
/
   63%
-
   63%
\
   63%
/
   64%
-
   64%
\
   64%
/
   64%
-
   64%
\
   64%
/
   64%
-
   65%
\
   65%
/
   65%
-
   65%
\
   65%
/
   65%
-
   66%
\
   66%
/
   66%
-
   66%
\
   66%
/
   66%
-
   67%
\
   67%
/
   67%
-
   67%
\
   67%
/
   67%
-
   67%
\
   68%
/
   68%
-
   68%
\
   68%
/
   68%
-
   68%
\
   69%
/
   69%
-
   69%
\
   69%
/
   69%
-
   69%
\
   70%
/
   70%
-
   70%
\
   70%
/
   70%
-
   70%
\
   70%
/
   71%
-
   71%
\
   71%
/
   71%
-
   71%
\
   71%
/
   72%
-
   72%
\
   72%
/
   72%
-
   72%
\
   72%
/
   73%
-
   73%
\
   73%
/
   73%
-
   73%
\
   73%
/
   73%
-
   74%
\
   74%
/
   74%
-
   74%
\
   74%
/
   74%
-
   75%
\
   75%
/
   75%
-
   75%
\
   75%
/
   75%
-
   76%
\
   76%
/
   76%
-
   76%
\
   76%
/
   76%
-
   76%
\
   77%
/
   77%
-
   77%
\
   77%
/
   77%
-
   77%
\
   78%
/
   78%
-
   78%
\
   78%
/
   78%
-
   78%
\
   79%
/
   79%
-
   79%
\
   79%
/
   79%
-
   79%
\
   79%
/
   80%
-
   80%
\
   80%
/
   80%
-
   80%
\
   80%
/
   81%
-
   81%
\
   81%
/
   81%
-
   81%
\
   81%
/
   82%
-
   82%
\
   82%
/
   82%
-
   82%
\
   82%
/
   82%
-
   83%
\
   83%
/
   83%
-
   83%
\
   83%
/
   83%
-
   84%
\
   84%
/
   84%
-
   84%
\
   84%
/
   84%
-
   85%
\
   85%
/
   85%
-
   85%
\
   85%
/
   85%
-
   85%
\
   86%
/
   86%
-
   86%
\
   86%
/
   86%
-
   86%
\
   87%
/
   87%
-
   87%
\
   87%
/
   87%
-
   87%
\
   88%
/
   88%
-
   88%
\
   88%
/
   88%
-
   88%
\
   88%
/
   89%
-
   89%
\
   89%
/
   89%
-
   89%
\
   89%
/
   90%
-
   90%
\
   90%
/
   90%
-
   90%
\
   90%
/
   91%
-
   91%
\
   91%
/
   91%
-
   91%
\
   91%
/
   91%
-
   92%
\
   92%
/
   92%
-
   92%
\
   92%
/
   92%
-
   93%
\
   93%
/
   93%
-
   93%
\
   93%
/
   93%
-
   94%
\
   94%
/
   94%
-
   94%
\
   94%
/
   94%
-
   94%
\
   95%
/
   95%
-
   95%
\
   95%
/
   95%
-
   95%
\
   96%
/
   96%
-
   96%
\
   96%
/
   96%
-
   96%
\
   97%
/
   97%
-
   97%
\
   97%
/
   97%
-
   97%
\
   97%
/
   98%
-
   98%
\
   98%
/
   98%
-
   98%
\
   98%
/
   99%
-
   99%
\
   99%
/
   99%
-
   99%
\
   99%
  100%
All of the flash memory blocks have been restored successfully.
[stl.restore /dev/stl0/13 /mtd_swu/1/exe.img;sync][ret : 0][errno : 2]
Flash Write End
[WriteImage time : 13430 sec ]
Flash Check Start
File Open SUCCESS [/dev/stl0/13] (size is 0)
total read size is 0
Flash Check End
[CheckFlash time : 100 sec ]
[ChangeVersion time : 30 sec ]
[Total time : 13760 sec ]
.[0;31;40m[CIP_AUTHULD] .[0;37;40mErrnum 1007
.[0;31;40m[CIP_AUTHULD] .[0;37;40mSystem will be down.(0x1)
.[0;31;40m[CIP_AUTHULD] .[0;37;40merror part. number = 1
.[0;31;40m[CIP_AUTHULD] .[0;37;40mSystem will be down.

Post by **arris69** » Mon Jan 07, 2013 3:11 pm

what dns you have used?

Post by **juusso** » Mon Jan 07, 2013 3:17 pm

prairie wrote:server address used was 149.154.159.134

Post by **arris69** » Mon Jan 07, 2013 3:58 pm

prairie wrote:Hi guys - had a problem with OTN downgrade using samygo server. The download and reboot occurred and flashing seemed to go fine but TV just reboots and begins the flash process every time. D-8000 T-GAP8AKUC1018 (modified) was on-board, can someone check logs to see what was sent? server address used was 149.154.159.134 Looks like I will have to scrounge around for another main board

debug output
...

normal reboot message after firmware install...

Code: Select all

04.01.2013 19:23:15 - /openapi/log/otn -> pdata from input data: - Array
(
    [S] =>
    [U] =>
    [t] => 2010-12-31T23:06:59
    [c] => UPGRADE
    [e] => REBOOT
    [v] => 0
    [d] => OK&NEWFIRMCODE=SWU_T-GAP8AKUC_001090_I04_EK000DK000KK000RK000_120610&OLDFIRMCODE=
)

download firmware again, (installed too, but last step failed -> no REBOOT message)....

Code: Select all

05.01.2013 20:53:32 - Array
(
    [S] => 5f92fe27
    [U] => _T-GAP8AKUC_e4e0c5f4f916
    [t] => 2011-01-01T00:11:30
    [c] => UPGRADE
    [e] => FIRM_DOWN
    [v] => 0
    [d] => OK&FileID=0&FileSize=41681072&DownloadTime=42&FileURL=http://www.samsungotn.net/Data/SWU_T-GAP8AKUC_001118_I04_ES000DS000KS000RS000_121231/appext.img
)

Post by **prairie** » Mon Jan 07, 2013 4:23 pm

Any theories on what happened based on this and debug log? Maybe file was corrupted in transit?

Post by **juusso** » Mon Jan 07, 2013 4:41 pm

perhaps you can execute run.sh from USB? Exlink cable access (i think you should have patched kernel and console unlocked). Weird if after firmware upgrade rs232 is automatically set to logic.

oops, you`ve log. Then what about shell? (use 23331003 {ENTER} and ctrl+c after you unlock console)

Post by **prairie** » Mon Jan 07, 2013 4:45 pm

yes I tried terminal input but it looks like this is onboot and not normal kernel so console doesn't do anything. I do have the patched kernel but it doesn't get that far.

Post by **arris69** » Mon Jan 07, 2013 5:23 pm

prairie wrote:yes I tried terminal input but it looks like this is onboot and not normal kernel so console doesn't do anything. I do have the patched kernel but it doesn't get that far.

the kernel is original one, console unlock is during boot!

you changed smthg in rootfs?
also the extensions are executed once.

when the bootloop started? on first boot after downgrade?

Post by **prairie** » Mon Jan 07, 2013 5:29 pm

arris69 wrote: the kernel is original one, console unlock is during boot!

ok, I misunderstood how console unlock works.

you changed smthg in rootfs?
also the extensions are executed once.

when the bootloop started? on first boot after downgrade?

I didn't change anything, this happened on 1st reboot after download, where FW gets flashed to it's partition.

Post by **juusso** » Mon Jan 07, 2013 5:36 pm

then what about shell trough cable?

SamyGO

[SOLVED] Brick during OTN

[SOLVED] Brick during OTN

Re: Brick during OTN

Re: Brick during OTN

Re: Brick during OTN

Re: Brick during OTN

Re: Brick during OTN

Re: Brick during OTN

Re: Brick during OTN

Re: Brick during OTN

Re: Brick during OTN