[ROOT] Rooting E/F on latest firmwares

[iT00NZ]

How to 'add sleep 120'? Edit file in '/mtd_rwcommon/SamyGO/rcSGO'? So, I have to get there with FTP by LAN with disconnected WLAN?

[sectroyer]

How to 'add sleep 120'? Edit file in '/mtd_rwcommon/SamyGO/rcSGO'? So, I have to get there with FTP by LAN with disconnected WLAN?

yeah that's best Than you can safely switch to WLAN

[iT00NZ]

I connected TV with notebook by LAN and still can't get FTP access to my TV. (I rooted it again)
http://i.imgur.com/5fntqlr.jpg
http://i.imgur.com/3MvFHxU.jpg

[juusso]

what is IP of your PC you are connecting from to TV? How did you set IP of TV?

[iT00NZ]

PC: 192.168.1.3
TV: 169.254.83.91
IP Address is set up automatically

[juusso]

Setup your tv ip to same ip range. Your tv does not get proper ip, perhaps your router does not have enabled dhcp server.

For example, set your tv manually:
IP: 192.168.1.4
Mask: 255.255.255.0
Gateway: your router's IP (i think it is 192.168.1.1)
Dns: your router's IP

[iT00NZ]

I set up IP, mask, gateway, DNS manually and still can't get root access.

[sectroyer]

I set up IP, mask, gateway, DNS manually and still can't get root access.

Yeah and probably your cable is wrong. run in terminal this command:

Code: Select all

ping IP_OF_YOUR_TV

It will probably fail. I also suspect you had bad ip (169....) over LAN because of faulty cable and/or router. If "normal communication" doesn't work how do you suspect rooting to be working ?

[iT00NZ]

I got this: hope you'll understand, 'cause I don't know how to change language to English
http://i.imgur.com/Lum3Zky.jpg

[juusso]

Reboot tv after you set up new ip and then check ftp to new ip.