[ROOT] Rooting E/F on latest firmwares

[iT00NZ]

I did it exactly as you said. After 2min still no root.

[sectroyer]

I did it exactly as you said. After 2min still no root.

reboot TV. Run app once again and post photo

[iT00NZ]

http://i.imgur.com/YJ9XlU7.jpg

[sectroyer]

http://i.imgur.com/YJ9XlU7.jpg

when you run it multiple times you always get NO at SamyGO_OK ?

[iT00NZ]

No, it appear after change data.zip. Always it was 'OK' there.

[sectroyer]

No, it appear after replace this data.zip. Always it was 'OK' there.

Okay just checked data.zip from zoel. You will not see it until you wait 2 minutes just as he said. WITH usb connected reboot TV wait about 5 minutes (to be sure) than run the app. Check if SamyGO_OK is YES or NO (make photo ). Quit the app wait 5 minutes run the app once again and check again

[iT00NZ]

While USB is attached during reboot, then I can't run widget (there is not showing in smart hub even after 5 minutes). Widget only appear when I get to 'other apps' in smart hub and then I plug USB drive.

[sectroyer]

While USB is attached during reboot, then I can't run widget (there is not showing in smart hub even after 5 minutes). Widget only appear when I get to 'other apps' in smart hub and then I plug USB drive.

wait 10 minutes and check telnet on ports 4023 and 5023
And don't use f***ing putty

[iT00NZ]

10 minutes in smarthub? Where can I check telnet ports?

[sectroyer]

10 minutes in smarthub? Where can I check telnet ports?

telnet ports you can check in terminal

Code: Select all

telnet IP_OF_TV 4023

for example but I think only 5023 will work