I know this is totally newbie, but *sigh* that's what I am. I've been wandering around the forum for a couple days and, yes, I know I should not have upgraded the TV's firmware. The fact is I did it a couple weeks ago and I didn't know about SamyGO at the time.
Now, as I should expect, installing SamyGO is not working as expected. I mean, the installation process works flawlessly, including applying data.zip, but, after everything is done, I don't get FTP and TELNET ports opened. In fact, netcat returns this:
Code: Select all
$ sudo nmap -vvv -O --osscan-guess 10.0.0.29
Starting Nmap 6.40 ( http://nmap.org ) at 2015-03-16 16:45 BRT
Initiating ARP Ping Scan at 16:45
Scanning 10.0.0.29 [1 port]
Completed ARP Ping Scan at 16:45, 0.22s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 16:45
Completed Parallel DNS resolution of 1 host. at 16:45, 0.11s elapsed
DNS resolution of 1 IPs took 0.11s. Mode: Async [#: 1, OK: 0, NX: 1, DR: 0, SF: 0, TR: 1, CN: 0]
Initiating SYN Stealth Scan at 16:45
Scanning 10.0.0.29 [1000 ports]
Discovered open port 443/tcp on 10.0.0.29
Discovered open port 80/tcp on 10.0.0.29
Increasing send delay for 10.0.0.29 from 0 to 5 due to 36 out of 119 dropped probes since last increase.
Increasing send delay for 10.0.0.29 from 5 to 10 due to 12 out of 38 dropped probes since last increase.
Increasing send delay for 10.0.0.29 from 10 to 20 due to 113 out of 376 dropped probes since last increase.
Discovered open port 6000/tcp on 10.0.0.29
Increasing send delay for 10.0.0.29 from 20 to 40 due to 11 out of 35 dropped probes since last increase.
Increasing send delay for 10.0.0.29 from 40 to 80 due to 11 out of 33 dropped probes since last increase.
Discovered open port 7676/tcp on 10.0.0.29
Discovered open port 4443/tcp on 10.0.0.29
Completed SYN Stealth Scan at 16:46, 62.31s elapsed (1000 total ports)
Initiating OS detection (try #1) against 10.0.0.29
Nmap scan report for 10.0.0.29
Host is up (0.0033s latency).
Scanned at 2015-03-16 16:45:53 BRT for 64s
Not shown: 995 closed ports
PORT STATE SERVICE
80/tcp open http
443/tcp open https
4443/tcp open pharos
6000/tcp open X11
7676/tcp open imqbrokerd
MAC Address: BC:8C:CD:59:3F:09 (Samsung Electro Mechanics co.)
Device type: general purpose
Running: Linux 2.6.X|3.X
OS CPE: cpe:/o:linux:linux_kernel:2.6 cpe:/o:linux:linux_kernel:3
OS details: Linux 2.6.32 - 3.2
TCP/IP fingerprint:
OS:SCAN(V=6.40%E=4%D=3/16%OT=80%CT=1%CU=41869%PV=Y%DS=1%DC=D%G=Y%M=BC8CCD%T
OS:M=55073331%P=x86_64-pc-linux-gnu)SEQ(SP=100%GCD=1%ISR=10E%TI=Z%CI=Z%TS=8
OS:)OPS(O1=M5B4ST11NW5%O2=M5B4ST11NW5%O3=M5B4NNT11NW5%O4=M5B4ST11NW5%O5=M5B
OS:4ST11NW5%O6=M5B4ST11)WIN(W1=3890%W2=3890%W3=3890%W4=3890%W5=3890%W6=3890
OS:)ECN(R=Y%DF=Y%T=40%W=3908%O=M5B4NNSNW5%CC=Y%Q=)T1(R=Y%DF=Y%T=40%S=O%A=S+
OS:%F=AS%RD=0%Q=)T2(R=N)T3(R=Y%DF=Y%T=40%W=3890%S=O%A=S+%F=AS%O=M5B4ST11NW5
OS:%RD=0%Q=)T4(R=Y%DF=Y%T=40%W=0%S=A%A=Z%F=R%O=%RD=0%Q=)T5(R=Y%DF=Y%T=40%W=
OS:0%S=Z%A=S+%F=AR%O=%RD=0%Q=)T6(R=Y%DF=Y%T=40%W=0%S=A%A=Z%F=R%O=%RD=0%Q=)T
OS:7(R=Y%DF=Y%T=40%W=0%S=Z%A=S+%F=AR%O=%RD=0%Q=)U1(R=Y%DF=N%T=40%IPL=164%UN
OS:=0%RIPL=G%RID=G%RIPCK=G%RUCK=G%RUD=G)IE(R=Y%DFI=N%T=40%CD=S)
Uptime guess: 0.003 days (since Mon Mar 16 16:43:19 2015)
Network Distance: 1 hop
TCP Sequence Prediction: Difficulty=256 (Good luck!)
IP ID Sequence Generation: All zeros
Read data files from: /usr/bin/../share/nmap
OS detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 65.10 seconds
Raw packets sent: 1441 (65.152KB) | Rcvd: 1334 (54.952KB)
So I'm posting here to know:
1. Is there anything I can do in order to force FTP/TELNET ports to be opened? Modifying SamyGO in some way, maybe?
2. In case #1 is not possible, is it possible for me to do a firmware downgrade?
Thanks a lot, guys! Awesome work!
