Yeah factory reset is a WONDERFUL way to BRICK tvgjstroom wrote: OK, I downgraded from 1128.1 to 1115.0, but I still have the same issues I had with 1128.1.
I also did several factory resets, I use the new root method, not the Skype root hack.
[ROOT] Rooting E/F on latest firmwares
Re: [App] Rooting E/F on latest firmwares
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Re: [App] Rooting E/F on latest firmwares
*Only on H with latest root in some "unlucky" cases, no need to frighten people freelysectroyer wrote:Yeah factory reset is a WONDERFUL way to BRICK tv
I do NOT receive any PM. Please use forum.
Re: [App] Rooting E/F on latest firmwares
So downgrading and factory reset did not solve this problem.gjstroom wrote:I have some problems with the root of my 46F8090 (T-FXPDEUC_1128.1).
It looks like the samygoautostart doesn't work properly, I have some weird issues.
Normally I watch tv via a VU+ Solo SE connected by hdmi and Anynet+ enabled.
When I switch on the tv my receiver and Vu+ also power on by hmdi-cec. Sometimes the root starts, sometimes not, it looks like it's waiting for something. Then sometimes when I go to the tv menu the root becomes activated, but also not every time.
When I switch to tv, sometimes it works, but also sometimes the tv becomes unresponsive and restarts. When it works, the root starts when I switch to an encrypted channel.
Mostly when I switch on the tv in tv mode the root works instant, but also it becomes activated when switching to a encrypted channel.
I also have lots of issues with connecting and disconnecting Anynet+.
Anny suggestions ?
Anything else I can try to solve it ?
TV was rooted in the past with the skype method and later with the new usb method, is it possible some parts of the skype root process are still present on my tv ?
How to check this ?
-
PrinzEugen
- SamyGO Project Donor
- Posts: 77
- Joined: Mon Jun 16, 2014 8:54 pm
Re: [App] Rooting E/F on latest firmwares
i still have problem with files via network every file when is played for first time after 2 min blocks smygo and restarts tv. After that when same file is played everything is ok, next file after i watched again blocks tv and restarts.
zoelchat please help, any error log or something ? cache clean ?
zoelchat please help, any error log or something ? cache clean ?
Re: [App] Rooting E/F on latest firmwares
errr... Why me? No idea 
I do NOT receive any PM. Please use forum.
-
PrinzEugen
- SamyGO Project Donor
- Posts: 77
- Joined: Mon Jun 16, 2014 8:54 pm
Re: [App] Rooting E/F on latest firmwares
is there any log for sudden crash?
usb is always pluged in f5300
/mnt/etc/init.d/01_01_catch_crap.init start stop
Status:
/mnt/etc/init.d/01_02_telnet.init start stop
Status:
/mnt/etc/init.d/02_04_vusb.init start stop
Status:
Flash Disk
Virt. USB
/mnt/etc/init.d/02_06_crypto_load.init start stop
Status:
/mnt/etc/init.d/03_01_fuse.init start stop
Status:
/mnt/etc/init.d/04_04_samba.init start stop
Status:
//192.168.0.100/TV on /dtv/usb/sdb/smb/192.168.0.100/TV type cifs (rw,mand,relatime,sec=ntlm,unc=\192.168.0.100\TV,username=user,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.100,file_mode=0755,dir_mode=0755,nounix,rsize=16384,wsize=131007,actimeo=1)
/mnt/etc/init.d/06_05_apache.init start stop
Status:
tcp 0 0 0.0.0.0:1080 0.0.0.0:* LISTEN 1425/httpd
tcp 0 10 192.168.0.15:1080 192.168.0.100:52385 ESTABLISHED 1433/httpd
/mnt/etc/init.d/06_05_samba-server.init start stop
Status:
1424 1418
/mnt/etc/init.d/99_99_RCremap.init start stop
Status:
usb is always pluged in f5300
/mnt/etc/init.d/01_01_catch_crap.init start stop
Status:
/mnt/etc/init.d/01_02_telnet.init start stop
Status:
/mnt/etc/init.d/02_04_vusb.init start stop
Status:
Flash Disk
Virt. USB
/mnt/etc/init.d/02_06_crypto_load.init start stop
Status:
/mnt/etc/init.d/03_01_fuse.init start stop
Status:
/mnt/etc/init.d/04_04_samba.init start stop
Status:
//192.168.0.100/TV on /dtv/usb/sdb/smb/192.168.0.100/TV type cifs (rw,mand,relatime,sec=ntlm,unc=\192.168.0.100\TV,username=user,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.100,file_mode=0755,dir_mode=0755,nounix,rsize=16384,wsize=131007,actimeo=1)
/mnt/etc/init.d/06_05_apache.init start stop
Status:
tcp 0 0 0.0.0.0:1080 0.0.0.0:* LISTEN 1425/httpd
tcp 0 10 192.168.0.15:1080 192.168.0.100:52385 ESTABLISHED 1433/httpd
/mnt/etc/init.d/06_05_samba-server.init start stop
Status:
1424 1418
/mnt/etc/init.d/99_99_RCremap.init start stop
Status:
Re: RE: Re: [App] Rooting E/F on latest firmwares
You played it imediatly after tv on or first run Start SamyGo App?PrinzEugen wrote:i still have problem with files via network every file when is played for first time after 2 min blocks smygo and restarts tv. After that when same file is played everything is ok, next file after i watched again blocks tv and restarts.
zoelchat please help, any error log or something ? cache clean ?
In my case i need run full start SamyGo App and only after play files from other device...
-
PrinzEugen
- SamyGO Project Donor
- Posts: 77
- Joined: Mon Jun 16, 2014 8:54 pm
Re: [App] Rooting E/F on latest firmwares
usb is plugged always,no need to root every time.
i wait a little to virt.usb get connected and after some time i played a file, there is no connection with time interval ,waiting 5 min at most (tried even more) after all no commands worked and after 2 min everything crashes.
any clues?
i wait a little to virt.usb get connected and after some time i played a file, there is no connection with time interval ,waiting 5 min at most (tried even more) after all no commands worked and after 2 min everything crashes.
any clues?
Re: [App] Rooting E/F on latest firmwares
Hello there,
I understand this correctly , for F Series I do not disable OTN suport ?
In the router everything is blocked for safety reasons.
My firmware 11.24.0
Can I normally rooten with usb then ?
Thank you Dont give me a shitstorm ( Ich kann kein Englisch )
I understand this correctly , for F Series I do not disable OTN suport ?
In the router everything is blocked for safety reasons.
My firmware 11.24.0
Can I normally rooten with usb then ?
Thank you Dont give me a shitstorm ( Ich kann kein Englisch )
Re: [App] Rooting E/F on latest firmwares
Disable OTN Support ASAP!!!!!
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!