[ROOT] Rooting E/F on latest firmwares

[Pilzbier]

No idea, maybe you have to re-pair it?

Its working.Only in the FTP connect mode (Root) not.
The smart control is working well as ever.
But I got no root and I ve the newest firmware on and not the 1120

[zoelechat]

-No need to relaunch eternally rooting widget, your TV IS rooted.
-Software update is expected to remain greyed at least 2-3min after boot.
-Auto-ticker stuff concern ONLY non-MST models, not yours.
-Again, nothing more should "happen".
-SamyGO is NOT firmware, and does not change version number.
-It DID work, your TV IS rooted.
-NO

[Pilzbier]

Hm.
OK.
When I have root (firezilla got acess to my TV over ftp) ,I cant steer my TV.
If I use the Smart Control NO button works.
The Power Button behind my TV doesnt work either.
I got no chanche to change the Menu or Channel or put the TV off.
There is no way.I can only pull the power cable to set the TV off.
After that I got no root.
I thougth,I downgrade to FW 1120 with this method.
I still have to downgrade to FW 1120 to work with SamyGo or?
How can I downgrade then my firmware?

[smart_lover]

For E SERIES!!!! do this:
*E-MST users, better go there.

• Unpack attached SamyGO_data_E.zip to FAT USB
• Download 128mb.xfs from: https://www.sendspace.com/file/el3xm8 or get it from /data folder of this archive
• Copy file 128mb.xfs to folder SamyGO_data on FAT USB
• Unpack SamyGO-F-SM-AutoStart-USB to FAT USB
• Now you should have FAT USB with two folders: SamyGO-F and SamyGO_data
• Connect USB to TV
• Launch SamyGO-F from SmartHub (if it doesn't appear after TV reboot). Sometimes it is necessary to connect USB WHILE TV IS OFF!!!
• The widget will automatically finish installation (No need to push any buttons) and close itself
• Now SamyGO is started and telnet/ftp/etc. should work.
• If ever installation widget restarts endlessly: Leave your SamyGO_data as it is but put there some (any) file named samyext4.img and try F-MST method. It might help.
• To enable AutoStart reboot TV and from Main Menu -> Smart Features -> Apps Settings -> Auto Ticker -> SamyGO_AutoStart

I used your above suggestion

E-MST users, better go there.

And root access(FTP and Telnet) works very well.But after any(Almost every times that my TV crashes because of memory usage issues) TV power off and power on, I have to Rerun SamyGoWidget to make my root access works again!
Can I use a method to autorun SamyGo widget automatically whenever TV finds that there is no root access available anymore?
Does

[*]To enable AutoStart reboot TV and from Main Menu -> Smart Features -> Apps Settings -> Auto Ticker -> SamyGO_AutoStart[/list]

helps me to autorun SamyGo widget or not?
I've E Series MST device.

[zoelechat]

@Pilzbier
Ok, downgrade shouldn't be needed, but it might help so you still can try, everything you need is here: viewtopic.php?f=70&t=9497
Better downgrade to 1119, not 1120.

@smart_lover
No need to flood repeatedly, no auto-ticker is intended on MST.

[Pilzbier]

OK.
After pulling the power cable and put the TV on again, it works.I have root.
The Software Update in the Menu is grey and stays grey.
Do I ve to enable the 99 inits again?
Do I ve to enable the Watchdog again?

OK,then I will downgrade to Version 1119 to use everything and make the system stable

[zoelechat]

The Software Update in the Menu is grey and stays grey.

Now I remember, it's expected on F and amongst "particular cases" in downgrade thread.

Do I ve to enable the 99 inits again?

If you don't need them: no.

Do I ve to enable the Watchdog again?

Never

[Pilzbier]

The Software Update in the Menu is grey and stays grey.

Now I remember, it's expected on F and amongst "particular cases" in downgrade thread.

OK.I will try it.

Do I ve to enable the 99 inits again?

If you don't need them: no.

OK.
PVR and Channelinfo I will need I think.

Do I ve to enable the Watchdog again?

Never

OK

[Pilzbier]

@Pilzbier
Ok, downgrade shouldn't be needed, but it might help so you still can try, everything you need is here: viewtopic.php?f=70&t=9497
Better downgrade to 1119, not 1120.

@smart_lover
No need to flood repeatedly, no auto-ticker is intended on MST.

If I want to put the files to the usb stick,I ve to take it from my TV and put it in my PC.
But then I got no root because of disconnecting the USB from my TV.
Should I put the files then on my USB drive and reconnect it to my TV and start SamyGo Fix like before?
Or should I use filezilla and ftp to find the usb on my TV and get the files from there and put it on?
How can I find the USB then on my TV from filezilla?

If I have to put the stick in the PC,then I will first have no root when I put the Stick back in TV.
Will it work then?No risk of damage?
I will then do the first steps with the SamyGo USB.(libdowngrade and SamyGo Data File copy)
Then I will shut the TV down and Plug in a second USB with the 1119 Firmware on it and let it install. Is that rigth this way?

[zoelechat]

Simply unplug USB while TV is off, put needed files on it, and replug it before power on.